GGM Gastro GE500M Dishwasher 3.55 kW User Manual
- June 9, 2024
- ggm gastro
Table of Contents
Gastro GE500M Dishwasher 3.55 kW
User Manual
GENERAL INFORMATION
Before installing the appliance, read operation and maintenance instructions carefully.Wrong installation and part changing may damage the product or may cause injury on people.These are not in our company’s responsibility to damage the appliance intentionally,negligence,detriments because of disobeying instructions and regulations,wrong connections.Unauthorized intervention to appliance invalidates the warranty.
- This instruction manual should be kept in a safe place for future reference.
- Installation should be made in accordance with ordinances and security rules of that country by a qualified service personnel.
- This appliance has to be used by trained person.
- Please turn off the appliance immediately in the event of malfunction or failure.The appliance should be repaired only by authorized service personnel.Please demand original spare part.
A1 PRODUCT DESCRIPTION
*The Professional Undercounter Type Dishwasher ,that provides high efficiency has been designed to be used in industrial kitchens.
| Product Code | Dimensions (mm) | Weight (kg) | Packaging Dimensions (mm) |
|---|---|---|---|
| EMP.500 | 590x700x820 | 67 | 725x650x970 |
A2 TECHNICAL INFORMATION
| Product Code | EMP.500 |
|---|---|
| Capacity (Plate/ hour) | 500 |
| Water Consumption(Lt/Piece.) | 2,5 |
| Total Power (KW) | 3,6 |
| Motor Power (KW) | 0,55 |
| Operating Voltage (V) | 220 |
| Water Pressure ( bar ) | 4 |
| Washing Tank Power (KW) | 2,5 |
| Rinsing Tank Power (KW) | 3 |
| Cable (mm²) | 3×2,5 |
| Fuse (A) | 25 |
| Max.Plate Diameter (Ø) | 320 |
| Program Number (ºC) | 90 – 120 – 180 |
A3 TRANSPORTATION
This appliance can not be moved by hand from area to area.It must be moved
on pallet with forklift truck.
A4 UNPACKING
Please unpack the package according to the security codes and ordinances of current country and get rid from the pack.Parts which contacts with food are produced by stainless steel.All plastic parts are marked by material’s symbol.
*Please check that all the parts of appliance had come completely and if they are damaged or not during the shippin.
INSTALLATION
Please place the product to straight and sturdy ground,please take necessary steps against possibility of overturn.
Technician who will serve for installation and service for the appliance must be professional on this subject and must have installation and service licenses by the company.
Connection to Electric Power Supply must be done by authorized person.
Please be sure that the voltage connected to appliance must be equal with the voltage which is on appliance’s label.
This appliance must be connected to an earthed outlet in accordance with
safety rules and standards.
Appliance’s earthing must be connected to earthing line on panel which is nearest to electric installation.
Connection to the main fuse and leak current fuse must be done in accordance with the current regulations.
SAFETY INSTRUCTIONS
Do not use the appliance in insufficient lighted place.
Do not touch the moving attachments while the appliance operates.
Do not install the appliance in the presence of flammable or explosive materials.
Do not operate the appliance when the machine is empty.
Do not load so less or more than appliance’s capacity.
Do not attempt to use the appliance without suitable protective equipments.
Because of any reason if there is a fire or flame flare where the appliance is used,turn off all gas valves and electric contactor switch quickly and use fire extinguisher. Never use water to extinguish the fire.
All the damages because of not having earthing connection will not be on warranty.
*Do not wash the decorated dishes.Prevent silver wares to contact with the other metals.
OPERATION
*Control Panel;*
A : Appliance ON lamp
B : Water heated lamp
C : Washing lamp
D : Water getting /rinsing
E : Evacuation lamp
F : Evacuation position
G : Appliance OFF position
H : Water inlet
I : Washing program
Operating;**
-
Change the water that is in water tank 3 times in a day.
-
Before putting the dishes in to the appliance,make prewash with cold or warm water without using any detergent.
-
Turn on the water source valve and plug in the appliance.
-
In order to take off any residue that remain in storage or pipes,operate the appliance when it is empty.
-
When the appliance is at OFF position,get ‘’water inlet’’ by switching to right.If ‘’water heated lamp’’ signals ,it indicates that the power is given to the dishwasher,water is
given and heated. -
Open the appliance’s lid and put enough detergent into the storage.(If detergent pump is not connected ).
-
Place the dirty dishes on baskets.
-
Close the lid and choose the suitable washing program.Connected indicator lamp signals and washing starts.
-
Washing process; for hot water and washing with detergent (minimum 55°C) ,for rinsing with hot water and polisher (minimum 75°C).
-
After washing process,the appliance will start the automatic rinsing program.
-
At the end of program,open the lid and take off washed basket.Place another basket to be washed.The machine will do washing and rinsing process at chosen program.
CLEANING & MAINTENANCE
CLEANING AND MAINTENANCE AFTER EVERY USE
- Always turn off the appliance and disconnect from the power supply before cleaning.
- Evacuate the water by taking off the stopple and switching to evacuation position after every use.
- Clean all surfaces of the appliance with hot soapy water after every use.Rinse and dry with a wet cloth.
- Clean the control panel with soft moisty cloth,if necessary use ineffective detergent.
- Do not use abrasive cleaning chemicals as these can leave harmful residues.
- Do not clean the appliance by spraying water directly,otherwise electric motor may get damaged.
PERIODIC CLEANING AND MAINTENANCE
- Maintenance should be done by qualified person.
- Clean the limes of the burner,inner surface of the washing tank and water pipes once or twice in a year.
- Clean the limes with using rinsing and washing nozzles once in a month by using vinegar or lime remover.
- Clean the filters in the appliance once in a week.After cleaning be sure that thumbscrew is compressed.
- Clean the appliance’s fountains once in 15 days by detaching it.
- Clean the appliance’s evacuation stopple and evacuation hoses once in 15 days.
TROUBLESHOOTING
THE APPLIANCE DOESN’T
WASH WELL| 1. Clean the absorbing filter if it is dirty.
2. Check the washing nozzles if they are accumulated with residues or not.
3. Check the amount of detergent.
4. If chosen washing program is too less,repeat the program.
5. Check if the plates are placed to the baskets correctly.
---|---
CUPS AND PLATES ARE
NOT DRIED WELL| 1. If there is polisher or not,if not add some.
2. Check the amount of polisher.
---|---
MIST OVER ON CUPS| 1. After washing process ,take off the cups from baskets.
---|---
CORROSİON ON CUPS| 1. Only use products that are not foaming for the
professional dishwashers.
---|---
MUCH FOAM AT STORAGE| 1. Check the amount of detergent .
2. If foaming detergent is used,pour it and rinse the storage till the foams
are lost.
---|---
WASHING OR RINSING
HANDLES ARE TURNING
SLOWLY| 1. Take off washing handles and clean them.
2. Clean the washing pump absorbing filter.
---|---
VISCIDITY AND SPOTS ON
CUPS| 1. Reduce the amount of polisher.
---|---
- If dishwashing is not done at suitable quality
- If any function of security doesn’t work
- Do not use the appliance.
*If these problems are still going on,contact with our authorized services.
SPARE PART LIST-EXPLODING DRAWING
PRODUCT CODE : EMP.500
NO| PRODUCT NAME| P. CODE
1| HOSE INLET UPPER ELBOW (BUSHING)| M.ENJ-ERS-PLS-BYM-097
2| FOUNTAIN BELLY SIGN| YTL-ERS.BYM-KS-0014
3| PRESSURE PLASTIC| M.ENJ-ERS-PLS-BYM-059
4| FOUNTAIN CORE SHAFT| YTL-ERS.BYM-KS-0001
5| FOUNTAIN CORE SCREW| M.ENJ-ERS-PLS-BYM-070
6| FOUNTAIN| M.ENJ-ERS-PLS-BYM-053
7| BOTTOM TOP FOUNTAIN CORE GASKET (WITH ORING)| M.ENJ-ERS-LST-019
8| LOWER FOUNTAIN CORE| M.ENJ-ERS-PLS-BYM-020
9| HOSE INLET LOWER ELBOW (WITHOUT BUSHING)| M.ENJ-ERS-PLS-BYM-096
10| RIGHT SLIP SHEET| YSC-ERS.BYM-LZ-0005
11| DIAMETER 155 – MAGNET| M.MIK-ERS-001
12| MICNATIS BED 15X5| M.ENJ-ERS-PLS-BYM-001
13| BOTTOM COVER SHEET| YSC-ERS.BYM-LZ-0452
14| TERMOSTAT-0-90C (EGO-5517012040)| M.ELK-MEK-TRM1-008
15| RESISTOR COVER| M.ENJ-ERS-PLS-BYM-025
16| BOILER TANK| M.MEK-TES-BYM-BYL-001
17| F2120-1P 121348 UPI-BOILER RESISTANCE 220V-5000W| M.ELK-RZS-BRU-BYM-030
18| LEFT SLEEVE SHEET| YSC-ERS.BYM-LZ-0004
19| COVER ASSEMBLY (SPARE PARTS)| ARA-ERS.BYM-0012
20| COVER EXTERIOR SHEET| YSC-ERS.BYM-PN-0344
21| LID HANDLE (21 CM)| M.AKS-KLP-INX-003
22| COVER HANDLE TURNING PART| YTL-ERS.BYM-KS-0119
23| TOP COVER HANDLE| YSC-ERS.BYM-LZ-0455
24| SHORT WATER DRAIN WEDGE| M.ENJ-ERS-PLS-BYM-016
25| COVER ARM WEDGE PLASTIC| M.ENJ-ERS-PLS-BYM-017
26| FILTER COVER| M.ENJ-ERS-PLS-BYM-086
27| WATER DRAIN WEDGE BEARING| M.ENJ-ERS-PLS-BYM-112
28| DRAIN PUMP CL2100| M.ELK-MTR-PMP-002
29| DISHWASHING MOTOR| M.ELK-MTR-PMP-001
30| STRAINER| M.ENJ-ERS-PLS-BYM-041
31| 120541 UPI-TANK RESISTANCE 230V-2500W| M.ELK-RZS-BRU-BYM-028
32| SPRING SEAT SET| YTL-ERS.BYM-KS-0073
33| COVER SPRING| M.YAY-ERS-035
34| 9,525 MM 316K STAINLESS STEEL GRAIN BALL (INOX)| M.MUH-021
35| BODY SET| YTL-ERS.BYM-KS-0072
36| ASSEMBLY (SPARE PARTS)| ARA-ERS.BYM-0013
37| RIGHT SIDE SHEET| YSC-ERS.BYM -P N-0347
38| CORNER PLASTIC RIGHT| M.ENJ-ERS-PLS-BYM-061
39| CORNER PLASTIC LEFT| M.ENJ-ERS-PLS-BYM-062
40| WASHING PUMP HOSE| M.MEK-TES-HRT-014
41| FOOT TACROSIS| M.AKS-AYK-INX-004
42| ROUND STRAINER BED| M.ENJ-ERS-PLS-BYM-018
43| STRAINER NUT| M.ENJ-ERS-PLS-BYM-113
44| P ROSESTAT SHA MAN DIRA| M.ELK-MUH-001
45| READY ELECTRICAL PANEL GROUP| M.ELK-PNO-BYM-001
46| SWITCH| M.ELK-SLT-PKO-011
47| Z3-360S TIME ROLLER| M.ELK-KNT-ROL-007
48| DWT-3E TIME ROLLER| M.ELK-KNT-ROL-020
49| SCHNEIDER LC1K0901M7 MINI CONTACTOR| M. ELK -K NT-KNT-020
50| SCHNEIDER LC1K0910M7 MINI CONTACTOR| M.ELK-KNT-KNT-021
51| SCHNEIDER LC1K1210M7 MINI CONTACTOR| M.ELK-KNT-KNT-022
52| GLASS INSURANCE 5A| M.ELK-SGR-011
53| MAGNETIC SENSOR-HORIZONTAL| M.ELK-SWC-KTG-001
54| CHARTEL BUTTON| M.AKS-DGM-MUH-001
55| AIR TRAP| M.ENJ-ERS-PLS-BYM-019
56| VENTILATION-SINGLE INLET (14 LT)| M.ELK-SLN-PLS-001
57| WARNING LIGHT WITH PLUG-IN SOCKET-GREEN| M.ELK-LMB-SNY-001
58| WARNING LIGHT WITH PLUG-IN SOCKET – YELLOW| M.ELK-LMB-SNY-003
59| PANEL LABEL| M.AKS-ETK-LKS-ERS-BYM-014
60| 244 CM ELBOW-FREE WASTE WATER HOSE| M.MEK-TES-HRT-033
61| 32.50 MM TTR CABLE GRAY-BLACK| HEL-KB-TT-3*2,5-SYH
62| PG-16 GRAY CABLE GLAND WITH NUT (CENTER)| M.ELK-RKR-PLS-004
63| LEFT SIDE SHEET| YSC-ERS.BYM -P N-0346
64| CHASSIS| –
65| DETERGENT INLET PLASTIC| M.PLS-ERS-036
66| BACK COVER SHEET| YSC-ERS.BYM -P N-0010
67| VENTIL BOILER HOSE| M.MEK -TES-H RT-006
68| MAINS HOSE (150 CM)| M.MEK-TES-HRT-011
69| BOILER PUMP HOSE| M.MEK-TES-H RT-002
70| WASHING WATER INLET HOSE| M.MEK-TES-HRT-001
71| SPRINKLER DISTRIBUTION HOSE| M.MEK-TES-H RT-003
72| PLATE BASKET| EMP.TB.01
73| SPOON AND FORK BASKET| EMP.KC.01
74| GLASS BASKET| EMP.BB.01
75| TOP COVER SHEET| YSC-ERS.BYM-LZ-0448
ELECTRIC CIRCUIT SCHEMA
UNDERCOUNTER TYPE DISHWASHER
| Kasap Tip | Buzdolapları |
|---|---|
| P1 | 5 PROGRESSİVE COMMUTATOR |
| S1 | MAGNETİC DOOR SENSOR |
| C1 | BOİLER CONTACTOR 220V |
| C2 | WASHİNG CONTACTOR 220V |
| C3 | LİD CONTACTOR 220V |
| C4 | RİNSİNG CONTACTOR 220V |
| L1 | EVACUATİON LAMP |
| L2 | RİNSİNG LAMP |
| L3 | WASHİNG LAMP |
| L4 | WATER İS HEATED LAMP |
| L5 | START LAMP |
| T1 | BOİLER THERMOSTAT (30-90ºC) |
| T2 | WASHİNG THERMOSTAT (30-90ºC) |
| ZR1 | 5 CYCLE- CYCLE RELAY (İNTER RR-5TG) |
| ZR2 | 0-240 SEC. CYCLE RELAY |
| PR1 | PROSSESTAT |
| M | DETERGENT PUMPS |
| M1 | WASHİNG MOTOR 0,55 KW 230V |
| M2 | EVACUATİON MOTOR 0,44 W 230V |
| R1 | BOİLER RESİSTANCE 3000W |
| R2 | WASHİNG RESİSTANCE 2500W |
| F1 | LEAKAGE CURRENT SAFETY FUSE |
| F2 | ZR1 FUSE 500MA |
| V | SOLENOİD VALVE 220V |
| TR1 | WASHİNG MOTOR SAFETY RELAY |
| TR2 | EVACUATION HOSE SAFETY THERMIC |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>