D440-1700 LED Color On Dinan Module User Manual
- June 9, 2024
- DINAN
Table of Contents
D440-1700 LED Color On Dinan Module
MODULE
LED Color On Dinan Module
|
Meaning
---|---
NO LED
|
Device is in bypass mode or not powered, and will not adjust pedal sensitivity
Solid Green
|
Amp’d 2.0 has learned your vehicles accelerator pedal and can adjust pedal sensitivity. No Mobile device is currently connected.
Solid Red
|
A Mobile device is connected to the Dinan Module
Solid Orange
|
A Mobile device is connected to the DinanModule, has learned your vehicles accelerator pedal and can adjust sensitivity
Flickering RED
|
Mobile device is communicating with the Dinan Module
Blinking RED
|
If the Red LED is continuously blinking slowly, The device may not be able to read the calibration EEPROM.
Troubleshooting
Troubleshooting without a Mobile Phone connected to the Dinan Module
Symptom
|
Possible cause
|
Recommended Action
Dinan module LED is not Green
|
Dinan harnesses are not fully connected
| Confirm the harnesses are securely connected to the vehicle harness, accelerator pedal and the Dinan module.
A pedal relearn has not been completed
|
Complete a pedal relearn. See the quick start guide for instruction
Dinan module LED is not Orange when a mobile device is connected|
A pedal relearn has not been completed
|
Complete a pedal relearn.
Wireless switch is not turning on
|
Batteries may be installed incorrectly
| Reinstall batteries. The positive side of the batteries should be visible when in the battery tray.
Wireless switch is not changing the pedal sensitivity
|
Wireless switch has not been connected to the DinanModule
|
Follow the quick start guide instructions for connecting your wireless switch.
Wireless switch has not been connected to the Dinan Module
| Reset switch pairing with the Mobile app. Follow the quick start guide instructions for connecting your wireless switch.
A pedal relearn has not been completed
|
Complete a pedal relearn. See the quick start guide for instruction
Dinan module LED is slowly blinking RED
|
Device cannot read the calibration EEPROM
| Hard Reset the device by disconnecting, letting it rest for apprx. 10
seconds, and reconnecting the harnesses.
Troubleshooting with a Mobile Phone connected to the Dinan Module
Symptom
|
Possible cause
|
Recommended Action
Dinan module LED is not Red
|
Dinan harnesses are not fully connected
| Confirm the harnesses are securely connected to the vehicle harness, accelerator pedal and the Dinan module.
A mobile device is not linked to the Dinan module
|
Follow the in App instruction for linking a mobile device.
Mobile device will not link to the Dinan module
|
The Dinan device cannot be found
| Confirm the harnesses are securely connected to the vehicle harness, accelerator pedal and the Dinan module.
The Dinan device cannot be found
|
Follow the in App instruction for linking a mobile device.
Bluetooth is not enabled on the mobile device
|
Enable Bluetooth connection for the Dinan mobile app.
Location services are not enabled on the mobile device
|
Enable location services for the Dinan mobile app.
Mobile device is not change the pedal sensitivity|
A pedal relearn has not been completed
| Complete a pedal relearn. Follow the in app instructions from the devices
page (the LED on the Dinan module will be orange when complete)
Dinan module LED is slowly blinking RED| Device cannot read the calibration
EEPROM| Hard Reset the device by disconnecting, letting it rest for apprx. 10
seconds,
and reconnecting the harnesses.