cell2 02180151 High Gradient Windshield Shroud Kit User Manual
- June 9, 2024
- Cell2
Table of Contents
cell2 02180151 High Gradient Windshield Shroud Kit User Manual
INSTALLATION
- Assemble the lighthead to the plastic shroud with the rubber backing.
- Adjust the angle of the lighthead before fixing it with the provided machine screws (ensure that they are on the same level).
- Choose a mounting area on the windshield that is clear from obstruction to view or interference with driving.
- Clean the mounting area thoroughly with alcohol and remove tape backings before mounting.
- Press the assembly firmly againest the windshield for 1 minute to complete the installation.
- Make wiring according to the lighthead manual.
NOTE: Lightheads may be oriented with cable exiting to the left or to the
right of the rear shroud.
CAUTION: Recommended torque force @ 1.5~2.5Kgf-cm
ADJUSTABLE ANGLE
The angle of ligh the ad is adjustable with 55 degree at most for optimum
warning efficiency
Horizontal marking that indicates level of adjustment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>