BLAUPUNKT PP30BT Jobsite Radio with Bluetooth User Manual

BLAUPUNKT PP30BT Jobsite Radio with Bluetooth

Important Safety Instructions

RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution:
To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
Explanation of Graphical Symbols:
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate this product. This will assure you years of trouble free performance and listening pleasure.

Important Notes

• This safety and operating instruction should be retained for future reference.
• The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
• Do not install the product in the following areas:
• Places exposed to direct sunlight or close to radiators.
• On top of other stereo equipment that radiate too much heat.
• Blocking ventilation or in a dusty area.
• Areas where there is constant vibration.
• Humid or moist places.
• Do not place near candles or other naked flames.
• Operate the product only as instructed in this manual.
• Before turning on the power for the first time, make sure the power adaptor is properly connected.
• Plug-in the USB stick directly or use an USB-extension cable which is not longer than 25 cm.
  For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.
  Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

1. Read Instructions – All the safety and operating instructions must be read before the product is operated.
2.  Retain Instructions – The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings – All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions – All operating and users’ instructions should be followed.
5. Installation – Install in accordance with the manufacturer’s instructions.
6. Power sources – This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Grounding or polarization – the product is not required to be grounded. Ensure that the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a plug having one blade wider than the other). This plug will fit onto the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry safety approval appropriate to the country of use.
8. Power cord protection – Power-supply cords should be routed so that they are not likely to be walked on, kinked or pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point where they exit from the product.
9. Ventilation – The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.
10. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.
11. Water and moisture – To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).

SAFETY INSTRUCTIONS

1. Read Instructions – All the safety and operating instructions must be read before the product is operated.

2.  Retain Instructions – The safety and operating instructions should be kept with the product for future reference.

3.  Heed warnings – All warnings on the product and in the operating instructions should be adhered to.

4. Follow instructions – All operating and users’ instructions should be followed.

5. Installation – Install in accordance with the manufacturer’s instructions.

6. Power sources – This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

7. Grounding or polarization – the product is not required to be grounded. Ensure that the plug is fully inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a plug having one blade wider than the other). This plug will fit onto the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry safety approval appropriate to the country of use.

8. Power cord protection – Power-supply cords should be routed so that they are not likely to be walked on, kinked or pinched by items placed on or against them, paying particular attention to cords from plugs, receptacles and the point where they exit from the product.

9. Overloading – Do not overload wall outlets, extension cords, or multiple sockets, as this can result in a risk of fire or electric shock.

10. Ventilation – The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface. Do not cover the product with any items such as tablecloths, newspapers, etc.

11. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.

12. Water and moisture – To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).

13. Object and Liquid Entry – Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.

14. Cleaning – Unplug the product from the wall outlet before cleaning. Dust in the woofer may be cleaned with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be careful not to damage the drive units.

15. Attachments – Do not use attachments not recommended by the product manufacturer, as they may cause
    hazards.

16. Accessories – Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer.

17. Moving the product – A product and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the product and cart combination to overturn.

18. Unused periods – The power cord of the appliance should be unplugged from the outlet during lightning storms
    or when the apparatus is left unused for a long period of time.

19. Servicing – Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. Please remove the power plug form the main power source or wall power source when not in use. When
    plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.

21. Replacement parts – When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

22. Mains fuses – For continued protection against fire hazard, use fuses only of the correct type and rating. The
    correct fuse specification for each voltage range is marked on the product.

23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker may be damaged when a peak level section is suddenly played.

24. The only means of completely disconnecting the product from the power supply is by removing the power cord
    from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use.

25. Try to install the product near a wall socket or extension cord and shall be easily accessible.

26. The highest environmental temperature suitable for this product is 35°C.

27. ESD hints – If the product maybe reset or not reset to operation of control due to electrostatic discharge, just
    switch off and reconnect again, or move the product to another location.

28. Battery

    • The batteries must not be exposed to excessive heat such as sunshine, fire or the like.

    • The batteries should be drawn to the environmental aspects of battery disposal.

    • Battery usage CAUTION-to prevent battery leakage which may result in body injuries, property damage, or
      damage to the apparatus:

    • Install all batteries correctly, + and – as marked on the apparatus. . Do not mix batteries (old and new or carbon and alkaline, etc.)

    • Remove batteries when the unit is not used for a long time.

ERP2 (Energy Related Products) note
This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) NO. 1275/2008 implementing Directive 2009/125/EC regard to standby and off mode electric power consumption of electronic household and office equipment.After 30 minutes without any audio input, the device will automatically switch into standby mode. Follow up the instruction manual to resume the operation.

Important note:
This device is equipped with an energy saving mode: if no signal is given during 30 minutes the device will switch automatically into standby mode in order to save energy (ERP 2 standard). Please note that low volume setting in the audio source may be recognized as “no audio signal”: this will affect the capability of signal detection from the device and can also originate an automatic switch into standby mode. If this happens please reactivate the audio signal transmission or increase the volume setting on the audio source player (MP3 player, etc.), in order to resume playback. Please contact the local service center if the problem remains.

WARNING
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.ERP2 (Energy Related Products) note
This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) NO. 1275/2008 implementing Directive 2009/125/EC regard to standby and off mode electric power consumption of electronic household and office equipment.After 30 minutes without any audio input, the device will automatically switch into standby mode. Follow up the instruction manual to resume the operation.

Important note:
This device is equipped with an energy saving mode: if no signal is given during 30 minutes the device will switch automatically into standby mode in order to save energy (ERP 2 standard). Please note that low volume setting in the audio source may be recognized as “no audio signal”: this will affect the capability of signal detection from the device and can also originate an automatic switch into standby mode. If this happens please reactivate the audio signal transmission or increase the volume setting on the audio source player (MP3 player, etc.), in order to resume playback. Please contact the local service center if the problem remains.

WARNING
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
6. The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus.
7. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
8. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
9. Do not place this unit close to a strong magnetic field.
10. Do not place the unit on a amplifier or receiver.
11. Do not place this unit in a damp area as the moisture will affect the life of electric components.
12. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the TV screen. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
16. The mains plug is used as the disconnect device, the disconnect device must remain readily operable.
17. To prevent possible hearing damage, do not listen at high volume levels for long periods.

NOTICE
Conformity
Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirement and other relevant provisions of Directive 2014/53/EU. Declaration of conformity can be obtained from the product page at www.blaupunkt.com.
Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland, Phone: +48 22 688 08 00, E-mail:
info@everpol.pl

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please cat according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be dispose with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box),polystyrene foam(buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Recording and playback of material might require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, lnc. and any use of such marks by us is under license. Other trademarks and trade names are those of their respective owners.
Many thanks to buy our model, please read and reference this manual carefully before operate the unit. Please keep the manual for future operation reference.

Control locations

1. display
2. battery charging LED
3. mode knob (power/FM/Bluetooth/AUX)
4. Volume knob
5. Tune +/-( previous/next, radio preset+/-, pause, pair) button
6. Speaker
7. FM antenna
8. Handle
9. AUX IN audio cable compartment
10. Battery compartment
11. AC input outlet
12. Power ON/OFF button
13. Open/close button

Power setting and charge battery
The unit built in rechargeable battery, which is allow to enjoy and play music outdoor. Use the female terminal of supplied AC power cable to connect the AC input outlet on rear panel of unit, and insert the AC power plug into wall- mount outlet in order to get the power source. Then the battery charging LED(nearby left top corner of display) will light up, which means the battery is charging. It takes 6~8hours for charging, and the charging LED will off after be fully charged. The battery power playback time is 8~10hours depends on volume level.
In case of the battery power exhausted, the unit and display will auto off. Please arrange recharging; or you can connect AC power directly for playback.

Note:
Your battery will last longer if you following these simple guidelines for charging and storing.

1. For charging first time, charge it at least 10 hours. And the battery will provide the best performance after fully charge and discharge 3 times. It is better to charge the unit after discharge completely, otherwise there may affect the battery’s lifetime.
2. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
3. Do not charge (longer than 24 hours). Excessive charging or discharging may shorten the battery’s life.
4. Due to prolong charging and discharging, the unit battery life will be affected and playback will become shorten. We cannot guarantee the same playback consistently throughout and this is not include in our warranty and service.
5. During charging, you can play the music at the same time.
6. Please do not use it under the high humidity and temperature environment for long time.
7. Please turn off the speaker if long time not to use.

Unit power on
Press the power on/off button on rear panel to power on or cut off the power completely. Press the power on/off button on rear panel first, then rotate the mode knob on front panel to turn on the display. You can select display on/off, FM radio, Bluetooth, AUX IN playback mode by using this mode button. In case you are not intend to use the unit for long time, please press the power on/off button on rear panel to cut off and save power.

FM radio operation
Before listen to the radio, please adjust the antenna and move the unit next to the window, or try to change place in order to get better FM reception. Rotate the mode knob on FM position to select FM radio mode after power on, rotate the volume knob to adjust the output volume level.
Tune the station: long press (2 seconds) tune+/- button to scan the available station in upward or downward frequency, the unit will stop and auto play the scanned station. Press and hold (3 seconds) tune+/- button at same time to scan and save the available station automatically(max supported up to 40 preset stations); short press tune+/- button to switch the preset radio station. Short press the tune+/- button twice can adjust the frequency as per 0.1MHz.

Bluetooth operation
This product includes Bluetooth function which can wireless playback the music from other Bluetooth device (like smart phone, tablet etc).

• Rotate the mode knob on Bluetooth position to select Bluetooth mode after power on, rotate the volume knob to adjust the output volume level.
• Enable the Bluetooth function on your device, and search the available device (please reference your device manual for operation), then check the available Bluetooth device on the list. Select “ BP PP30BT” for pairing, and a short notice sound will come out from speaker after paired successful.
• Select and play the music from your Bluetooth device, adjust the volume level on your device and radio side, then the sound will wireless play and come out from the speaker.
• Short press tune+/- button can select last or next track; long press(2 seconds) tune + button to pause the playback, long press it again to resume the playback; Press and hold (3 seconds) tune+/- button to disconnect the Bluetooth connection with current device, and search other device for paring.

Notices:

• All Bluetooth devices are not guaranteed for pairing successfully due to different design and brand.
• The best working distance of Bluetooth is within 10 meters without any obstacle in between.
• The unit only can pair and work with one Bluetooth device in one time.
• In case of an incoming phone call during Bluetooth playback; the music will stop temporary, and resume to playback after end the phone call.

AUX IN playback
Rotate the 3pcs open/close button on rear panel to open up the audio cable box; Using the attached audio cable to connect with your other outsourcing audio player’s line out or headphone jack (like mobile phone or mp3 player etc.). Rotate mode knob to AUX position in order to enter AUX mode. Rotate the volume knob to adjust the output volume level, and check the volume level on your audio player as well. Select and play music from your outsourcing player, then the sound will output from the radio speaker.
In AUX IN playback mode, the main control is on your audio player side, but you also can try to adjust volume from the radio.

Trouble shooting

The speaker cannot turn on.

• Please check if the power setting is correct as introduced.

No sound output.

• Please try to adjust the volume knob, and check the play source.
• please contact service center for support if the issue remained.

Background noise on FM station.

• try to move the unit in other place for better reception.
• scan and switch to other station for listening.

Intermittent sound output in Bluetooth mode

• Please try to move your Bluetooth device more close to the radio.
• Please reference the manual for re-pairing.

the sound output is too small in Bluetooth mode.

• Please check the volume level your Bluetooth device and radio both.

Specification

• Power source: 230V~/50Hz
• Battery power source: 7.4V/2200mAh.
• FM radio frequency: 87.5~108.00MHz
• Bluetooth version: 4.2
• Battery power charging time: 6~8 hours
• Battery power playback time: 8~10 hours(depends on volume level etc) Water proof level: IPX5
• RMS output power: 1 x 5W
• Standby power consumption: <0.5W
• Power consumption: 13 W (The above spec may update without priority notice.)

Competence Center
2N-Everpol Sp. z o.o.
ul. Pulawska 403A
02-801 Warsaw, Poland
phone: +48 22 688 08 00
e-mail: info@everpol.pl
www.blaupunkt.com
In case of questions or problems please contact our service.
Tel. 00 48 22 688 08 33
E-mail: info@blaupunkt-audio.pl
Enjoy it.
All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

References

• blaupunkt.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>