JBL Reflect Mini NC True Wireless Noise Cancelling Sport Headphones User Guide
- June 4, 2024
- JBL
Table of Contents
- JBL Reflect Mini NC True Wireless Noise Cancelling Sport Headphones
- What’s Included
- APP
- How to Wear
- First-time Use
- DUAL CONNECT + SYNC
- POWER OFF
- Manual Controls
- BUTTON COMMAND
- DO MORE WITH THE APP
- Charging
- TECH SPECIFICATION
- IC RF Exposure Information and Statement
- Head operation
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JBL Reflect Mini NC True Wireless Noise Cancelling Sport Headphones
What’s Included
APP
GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.
How to Wear
Mix and match for a perfect fit and audio performance
First-time Use
DUAL CONNECT + SYNC
Stereo Mode
Mono Mode
POWER OFF
Manual Controls
Connect to a Bluetooth device
RECONNECTING LEFT & RIGHT
RESET
BUTTON COMMAND
- Enable advanced controls by connecting your JBL reflect mini NC to JBL Headphones App.
- ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO Y OUR PREFERRED EARBUD (L/R).
DO MORE WITH THE APP
Charging
TECH SPECIFICATION
- Model: REFLECT MINI NC
- Driver Size: 6 mm / 1/4” Dynamic Driver
- Power supply: 5 V 1 A
- Earpiece: 6.75 g / pc (13.5 g combined)
- Charging case: 46 g
- Headset battery type: Lithium-ion Battery (50 mA / 3.7 V)
- Charging case battery type: Lithium-ion Battery (300 mA / 3.7 V)
- Charging time: < 2 hrs from empty
- Music playtime with BT on and ANC off up to 7 hrs
- Music playtime with BT on and ANC on up to 6 hrs
- Frequency Response: 2 0 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 97 dB SPL @ 1kHz
- Maximum SPL: 94 dB
- Microphone sensitivity: -32 dBV / Pa @ 1 kHz
- Bluetooth version: 5.1
- Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: < 10 dBm
- Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaging over one gram of tissue.
Device types: (IC: 6132A-REMININCTWS) have also been tested against this SAR
limit According to this standard, the highest SAR value reported during
product certification for head use is 0.1098W/Kg. The device was tested for
typical bodily operations where the product was kept 0 mm from the head. To
maintain compliance with IC RF exposure requirements, use accessories that
maintain a separation distance of 0mm between the user’s head and the back of
the headset. The use of belt clips, holsters, and similar accessories shall
not contain metal parts in its assembly. The use of accessories that do not
meet these requirements may not comply with IC RF
exposure requirements and should be avoided.
Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that does not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.