ARREGUI CLASS Digital Locking Desktop Safe Instruction Manual
- June 9, 2024
- ARREGUI
Table of Contents
CLASS Digital Locking Desktop Safe
Instruction Manual
ATTENTION!
Please read these instructions before installing and using the safe.
USING YOUR SAFE
- OPENING: Insert the key into the lock and turn right.
- CLOSING: Insert the key into the lock and turn left.
KEY REPLACEMENT
Key replacement can be requested providing the serial number which you will nd at the bottom right hand corner of the door. Alternatively you can also provide the 5 digit number printed on the key.
INSTALLING THE SAFE
To reduce the risk of theft, the safe can be secured to the oor, wall or inside the wardrobe. For your convenience, there are 8mm diameter holes at the back and bottom of the safe. The safe can be fixed by using the xing screws.
GUARANTEE CERTIFICATE
The safe is guaranteed for a period of 24 months from the date of its
purchase, as established by the Law 23/2003 dated July 10th on Guarantees in
the Sale of Consumer Goods.
ABSS accepts the responsibility for lacks of approval declared within a period
of two years in the event of any manufacturing fault which affects the
functioning of the safe from the date of its delivery, according to the law.
As from the first 12 months, the buyer must prove that the nonconformity
already existed at the moment he received the safe.
The faults produced as a result of an improper use or installation, an excess
of humidity or salinity, water or cement filtrations, force, the handling of
the devices by non- authorized persons, disasters, impacts and falls are
excluded from the guarantee.
The repair or substitution of any part due to a fault implies a 6-month
extension to the guarantee of the part repaired or substituted. ABSS will
accept the responsibility for the non-conformities that caused this repair
when the same factory faults that caused the first repair are repeated.
IDENTITY DETAILS
Name of the supplier …………………………………………….
Date of sale …. ……………………………………………………
Name of purchaser ………………………………………………
Address of purchaser ……………………………………………
IDENTIFYING DETAILS OF THE SALE
Model…………………………………………………………………
Series number …………………………………………………….
IMPORTANT:
- These details must be completed as clearly as possible and without delay by the supplier, who will stamp and sign on behalf of his company in the place indicated.
- The certificate remains in the possession of the purchaser.
- The purchaser must keep the RECEIPT for the purchase of the safe, together with the GUARANTEE CERTIFICATE to be able to accredit the date of purchase. Both documents are necessary to use the guarantee.
SELLO DEL DISTRIBUIDOR SUPPLIER’S STAMP CACHET DU DISTRIBUTEUR
TIMBRO DEL DISTRIBUTORE CARIMBO DO DISTRIBUIDOR STEMPEL DES VERTREIBERS
Pol. Industrial Ubegun. 3B.
20809 Aia-Orio. Gipuzkoa
(SPAIN)
[email protected]
References
- Design of mailboxes, safes in Gipuzkoa - Arregui - Orio
- Diseño De Buzones, Cajas Fuertes en Gipuzkoa - Arregui - Orio Gipuzkoa
- Mailbox Design, casseforti in Gipuzkoa - Arregui - Orio Gipuzkoa
- Diseño De Buzones, Cajas Fuertes en Gipuzkoa - Arregui - Orio Gipuzkoa