reolink Argus 2E 1080P Outdoor Security WiFi Camera User Guide
- June 9, 2024
- reolink
Table of Contents
Argus 2E 1080P Outdoor Security WiFi Camera
User Guide
Relink Argus 2E
Quick Start Guide
What’s in the Box
Camera Introduction
Different states of the status LED:
- Red Light : W I F I connection felled
- Blue Light : WIFI connection succeeded
Blinking: Standby status
On: Working status
Set up the Camera
Download and launch the Relink App or Client software and follow the onscreen
instructions to finish initial setup.
* On Smartphone
Scan to download the Relink App.
https://reolink.com/wp-json/reo-v2/app/download
*On PC
Download path of the Relink Client: Go to
https://reolink.com > Support > App & Client.
Charge the Battery
It’s recommended to fully charge the battery before mounting the camera outdoors.
Charging indicator:
- Orange L E D : Charging
- Green L E D : Fully charged
Install the Camera
Notes on Camera Installation Position
- Install the camera 2-3 meters (7-10 fit) above ground. This helot maximizes the detection range of the PIR motion sensor.
- For effective detection, please install the camera angularly.
NOTE: If a moving object approaches the PIR sensor vertically, the camera may fall to detect motion.
Mount the Camera to the Wall
It its suggested to use the security bracket to Install the camera when
mounting It outdoors.
Rotate to separate the base from the mount.
Drill holes In accordance with the mounting template and screw the base of the
mount onto the wall. Next, attach the other part of the mount onto the base,
NOTE: Use the drywall anchors Included in the package if needed,
Screw the camera to the mount.
Adjust the camera angle to get the be stifled of view.
Secure the camera by turning the part on the mount Identified in the chart
clockwise.
NOTE: To adjust the camera angle later, please loosen the mount by
turning the upper part anticlockwise.
Install the Camera with Loop Strap
Thread the loop strap through the slots and fasten the strap. It is the most recommended in stellation method if you plan to set up the camera on the tree.
Place the Camera on a Surface
If you plan to use the camera Indoors and put it on any flat surface, you may place the camera in to the stand bracket and adjust the camera angle by slightly rotating the camera back and forth.
Notes on PIR Motion Sensor
Detection Distance of PIR Sensor
The PIR detection range can be customized to meet your specific needs. You can
refer to the following table to set it up in Device Settings via Relink App.
Sensitivity| Value| Detection Distance
(For moving and living objects)
---|---|---
Low| 0 – 50| Up to 5 meters (16ft)
Mid| 51 – 80| Up to 8 meters (26ft)
High
.| 81 – 100| Up to 10 meters (33ft)
,
NOTE: The detection range would be wider with higher sensitivity but It would lead to more false alarms. It is recommended to set up the sensitivity level to “Low” or “Mid” when you install the camera outdoors.
Important Notes on Reducing False Alarms
- Do not face the camera towards any objects with bright lights, including sunshine, bright lamp lights, etc.
- Do not place the camera too close to a place with heavy traffic. Based on our numerous tests, the recommended distance between the camera and the vehicle would be 16 meters (52ft).
- Do not place the camera near outlets, including the air conditioner vents, humidifier outlets, the heat transfer vents of projectors, etc.
- Do not install the camera at places with strong wind.
- Do not face the camera towards a mirror.
- Keep the camera at least 1 meter away from any wireless devices, including WiFi routers and phones in order to avoid wireless interference.
Safety Instructions of Battery Usage
Relink Argus 2E is not designed for 24/7 full capacity running or around-the- clock live streaming. It’s designed to record motion events and remotely view live streaming only when you need it. Learn useful tips on how to extend the battery life in this post: https://support.reolink.com/hc/en- us/articles/360006991893
- Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or Relink solar panel. Do not charge the battery with solar panels from any other brands.
- Charge the battery when temperatures are between 0°C and 45°C and always use the battery when temperatures are between -20°C and 60°C.
- Keep the USB charging port dry, clean and free of any debris and cover the USB charging port with the rubber plug when the battery is fully charged.
- Do not charge, use or store the battery near any ignition sources, such as fire or heaters.
- Do not disassemble, cut, puncture, short-circuit the battery, or dispose of the battery in water, fire, microwave ovens and pressure vessels.
- Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any ways. If the battery is being used or charged, remove the battery from the device or the charger immediately, and stop using it.
- Always follow the local waste and recycle laws when you get rid of the used battery.
Troubleshooting
Camera Is Not Powering on
If your camera is not turning on, please apply the following solutions:
- Make sure the power switch is turned on.
- Charge the battery with a DC 5V/2A power adapter. When the green light is on, the battery is fully charged.
If these won’t work, please contact Relink Support https://support.reolink.com
Failed to Scan QR Code on the Phone
If you cannot scan QR code on your phone, please try the following solutions:
- Remove the protective film from the camera lens.
- Wipe the camera lens with a dry paper/towel/tissue.
- Vary the distance between your camera and the mobile phone so that the camera can focus better
- Try to scan the QR code under sufficient lighting.
If these won’t work, please contact Relink Support https://support.reolink.com
Failed to Connect to WiFi During Initial Setup Process
If the camera fails to connect to WiFi, please try the following solutions:
- Please make sure the WiFi band is 2.4GHz because the camera does not support 5GHz.
- Ensure that you have entered the correct WiFi password.
- Put the camera closer to your router to ensure a strong WiFi signal.
- Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
- Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters.
- Set your password using only the characters available on the keyboard.
If these won’t work, please contact Relink Support https://support.reolink.com
Specifications
Video
Video Resolution: 1080p HD at 15 frames/sec Field of View: 120° diagonal Night
Vision: Up to 10m (33 ft)
PIR Detection & Alerts
PIR Detection Distance: Adjustable/up to 10m (33ft) PIR Detection Angle: 100°
horizontal Audio Alert: Customized voice-recordable alerts Other Alerts:
Instant email alerts and push notifications
General
Operating Temperature: -10°C to 55°C (14°F to 131°F) Weather Resistance: IP65
certified weatherproof Size: 96 x 61 x 58 mm Weight (Battery included): 230g
For more specifications, visit https://reolink.com/.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF warning statement:
RF Exposure Warning Statements: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. This equipment
shall be installed and operated with minimum distance 20cm between the
radiator & body.
Simplified EU Declaration of Conformity
Relink declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
ICorrect Disposal of This Product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environment safe recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if
purchased from Reolink official stores or a Reolink authorized reseller. Learn
more: https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not
satisfied with the product and plan to return, we strongly suggest that you
reset the camera to factory default settings and take out the inserted SD card
before returning.
Terms and Privacy Use of the product is subject to your agreement to the Terms
of Service and Privacy Policy at reolink.com. Keep out of reach of children.
End User License Agreement By using the Product Software that is embedded on
the Reolink product, you agree to the terms of this End User License Agreement
(“EULA”) between you and Reolink. Learn more: https://reolink.com/eula/.
ISED Radiation Exposure Statement This equipment complies with IRSS-102
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
OPERATING FREQUENCY
(the maximum transmitted power)
2412MHz—2472MHz (18dBm)
Technical Support
If you need any technical help, please contact
our support team before returning the
products, https://support.reolink.com
This device contains licence-exempt transmitter(s)I receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
ReolinkTech https://reolink.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>