LANCOM GS-1108P Systems GmbH User Guide
- June 4, 2024
- LANCOM
Table of Contents
LANCOM GS-1108P Systems GmbH User Guide
Mounting & connecting
TP Ethernet ports
Connect one of the TP Ethernet ports 1-8 via an Ethernet cable to your end
device or another LAN switch.
Power connector (back side of the device)
Supply power to the device via the power connector on the back. Please use the
supplied IEC power cable.
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
Please observe the following when setting up the device
- The power plug of the device must be freely accessible.
- For devices to be operated on the desktop, please attach the adhesive rubber footpads
- Do not rest any objects on top of the device
- Keep all ventilation slots on the side of the device clear of obstruction
- Please note that support service for third-party accessories is excluded.
POWER
Off: Device switched off
Green: Device operational
L/A / PoE
L/A
| Green permanently | Link 1000 Mbps, no data transmission |
|---|---|
| Green flickering | Data transmission 1000 Mbps |
| Orange permanently | Link 10 / 100 Mbps, no data transmission |
| Orange flickering | Data transmission 10 / 100 Mbps |
PoE
| Off | Power supply for connected device disabled |
|---|---|
| Green | Power supply for connected device enabled |
Hardware
Power supply| Internal power supply unit (110–230 V, 50-60 Hz)
Power consumption| Max. 70 watts
Environment| Temperature range 0–40 °C; humidity 10–90 %; non-condensing
Housing| Robust metal housing with screw-on 19“ mounting brackets (220 x 44 x
135 mm > W x H x D), network connectors on the front
Number of fans| 1 quiet fan
Interfaces
ETH| 8 TP Ethernet ports 10 / 100 / 1000 Mbps
Package content
Cable| 1 IEC power cord
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen,
declares that this device is in compliance with Directives 2014/30/EU,
2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of
the EU
Declaration of Conformity is available at the following Internet address: www
.lancom-systems.com/doc
