The Home Depot Hanging Hook Kit Installation Guide
- July 6, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot Hanging Hook Kit
Product Information
- Draw the hold location
- Diagram: A ceiling with a marked location for drilling, a pencil is shown marking the spot.
- Drill 4 holes with an 8mm drill bit
- Diagram: A drill is shown drilling into the ceiling at the marked locations.
- Use a 12mm drill bit to clear holds
- Diagram: The drill is shown again, this time with a 12mm drill bit, clearing the drilled holes.
- Insert the expansion screw arbor without any damage during inserting
- Diagram: The expansion screw arbor is being inserted into the drilled holes.
- Install the ceiling hook, and tighten the screws with a screwdriver
- Diagram: The ceiling hook is being installed and screws are being tightened with a screwdriver and wrench.
- Suitable for hanging swings, hanging chairs, punching bag
- Diagram: Various items such as a punching bag, hanging chair, and swing are shown hanging from the installed ceiling hook.
Specifications
| Item | Description |
|---|---|
| Drill Bit Size | 8mm and 12mm |
| Tools Needed | Pencil, Drill, Screwdriver, Wrench |
| Suitable For | Hanging swings, hanging chairs, punching bag |
FAQ
- What size drill bits are needed for installation?
- You will need 8mm and 12mm drill bits.
- What tools are required for the installation?
- You will need a pencil, drill, screwdriver, and wrench.
- What items can be hung using this ceiling hook?
- This ceiling hook is suitable for hanging swings, hanging chairs, and punching bags
INSTALLATION INSTRUCTION
- Draw the hold location
- Drill 4holds with an 8mm drill bit
- Use 12mm drill bit clear holds
- Insert the expansion screw arbor without any damage during inserting
- Install the ceiling hook, and tighten the screws with screwdriverlpsum
- Suitable for hanging swings, hanging, chairs, purchasing bag
Read User Manual Online (PDF format)
Loading......