wipelot EAGLEEYE-S01 EagleEye Sense User Manual

June 5, 2024
wipelot

wipelot EAGLEEYE-S01 EagleEye Sense

wipelot-EAGLEEYE-S01-EagleEye-Sense

INTRODUCTION

This document contains the system test information of EagleEye Sense to help operating the device and to inform about the conditions that must be considered while using the unit.

BASIC INFORMATION AND PRODUCT WORKING PRINCIPLE

Basic Information

EagleEye Sense, which is the Wipelot Anchor, is the reader and transmitter unit of the Wipelot RTLS – IoT System. It redirects the data received from the tags in the coverage area to the remote port.
It allows to measure the Wipelot Tag’s distance with sub-meter accuracy. Using this distance information, Wipelot RTLS system generates location information.
It scans the environment and communicates with the tags automatically.
The remote embedded software update feature ensures compatibility with future new developments.

Working Principle

The device is powered via the USB port.

  • Step 1) Insert the Device to the USB port of the computer, the device will receive automatic power. And for communication, perform the operations contained in Section 5.1.
  • Step 2) For the devices to work, they must communicate with Wipelot tags. The device’s red LED starts to blink when it communicates with the tag.
  • Step 3) When the device accesses the Remote port (server), the green LED will start to light continuously. Before accessing the Remote port, the green LED blinks.

**TECHNICAL SPECIFICATIONS

wipelot-EAGLEEYE-S01-EagleEye-
Sense-1**

DESIGN AND FEATURES

There are Wipelot logo and the red and green LED notification lights at the front of the device. The Notification lights stay under the surface and are not visible when the device is turned off. On the back side, there is a label containing only the information of this device.wipelot-EAGLEEYE-S01
-EagleEye-Sense-2

  1. GREEN LED — Continuously flashing LED light indicates that communication with the remote port has been established. If the LED is blinking, then it is not communicating with the Remote port.
  2. USB — USB is used for powering the EagleEye and for transmitting and exchanging data
  3. RED LED — When it blinks intermittently, it means that the device is communicating with UWB and receiving distance information.
  4. LABELS — They contain information about the device’s model, serial number and anchor ID number.

TAG

There are 2 LEDs, red and green, and two buttons, orange and blue, on the tag.
To turn on the device, hold down the blue button for 5 seconds. When the device is turned on, the two LEDs light up and the tag vibrates once.
When the device is on, a blink of Green LED means that it is TWR.
When the battery falls below 3500 millivolts, the red LED starts blinking. When it falls below 3400 millivolts, the device automatically shuts down.
In order to charge the device, the charging station must be placed on the surface with the arrow mark so that the LEDs point in the direction of the arrow. Also, it is necessary to plug in the adapter of the charging station. If the battery voltage falls below 3500 millivolts (LED turns red), insert the battery into the charger.
The listening mode is active for the first 30 seconds when the device is plugged for charging. Therefore, after the red LED blinks for 30 seconds, the device stops listening and the red LED lights up steadily.wipelot-
EAGLEEYE-S01-EagleEye-Sense-5

To turn off the tag, hold down the blue button for 6 seconds, the green LED lights up continuously while the blue button is pressed. At the end of the 6th second, the red LED blinks and the tag vibrates once, immediately after this action, the blue button is pressed 6 times repeatedly.

FWUPDATE APPLICATION

Installation of CP210x USB to UART Bridge Virtual COM Port (VCP) Driver

From the files sent by Wipelot downloadable from https://bit.ly/3LzZrsM , the
CP210x_Universal_Windows_Driver folder must be extracted to an available folder, i.e., desktop. In the Device Manager under Ports (COM & LPT1) tab right-click ‘COM10’ (COM number may differ) and select ‘Update Driver’, then click ‘Browse my computer for driver software and select extracted folder. Drivers will be installed.

FW update Application

FW update Application is an interface developed by Wipelot engineers to read the data incoming to anchor. This application is not used for production environments. From the files sent by Wipelot downloadable from https://bit.ly/3LzZrsM , the FwUpdate folder must be extracted to an available folder, i.e., desktop, and the file named FwUpdate in the folder must be opened by double-clicking on it. The Program does not require any downloads. By double-clicking FwUpdate.exe, the program will be executed. Under the ‘Serial Port’ tab select Com Port as COM10 (COM number may differ) and Baud Rate as 230400. Then tick ‘New’ and ‘Service’ in the below sections and ‘Mobil’ in the Filter section. Finally click ‘Open’ and the tags will appear on the screen. The distance data is displayed on the screen with an interval of 1 seconds. wipelot-EAGLEEYE-S01-EagleEye-
Sense-6wipelot-EAGLEEYE-S01-EagleEye-
Sense-7

If there are more than one mobile tags in the environment, this section is normally used to filter by typing the Mobile ID in the filter field in the lower-right pane of the screen.

After these operations, the installation will be completed. The device can be used.
We have prepared our features that we have added to our code as video to try the channel switching event on the device. You can access the video from this link. https://bit.ly/3LzZrsM

WIPELOT TEKNOLOJİ SANAYİ LTD STİ.
General Ali Riza Gurcan Cad. Alparslan Is Merkezi No:27/15 Merter, Gungoren / İSTANBUL
Phone: +90 212 481 96 22
Fax: +90 212 481 96 23
Web: www.wipelot.com
E-mail: info@wipelot.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals