Rythflo RY-WH02 Bluetooth Headphones User Manual
- June 12, 2024
- rythflo
Table of Contents
User Manual
WIRELESS HEADPHONES
RY-WH02
What’s Included
- Wireless Headphones (Model:RY-WHO2) xl
- USB Type-C Charging Cable xl
- User Manual xl
- Pairs of Black & Red Eartips (Small. Mediums Large) x3
- Pairs of Black & Yellow Eartips (Small. Mediums Large) x3
- Pairs of Black & Blue Eartips (Small. Mediums Large) x3
Product Diagram
- Multi-Function Button (MFB)
- Type-C Charging Input
- LED Indicator
- Volume Up Button
- Volume Down Button
Button Controls
| Button | Status | Function | Operation |
|---|
Multi-function
button (MFB)| | Power on| Press and hold for 3s
Power off| Press and hold for 5s
Play/Pause| Press
| Answer call| Press
Reject call| Press and hold for 2s
Hang up call Cancel dial| Press
Answer the 2nd call and hang up the 1st| Press
Answer the 2nd call and hold the 1st on| Press twice
Switch between two calls| Press twice
| Activate voice assistant| Press twice
+| | Next track| Press and hold for 2s
Volume up| Press
Previous track| Press and hold for 2s
Volume down| Press
| Pairing| Reset| Press and hold for 5$ at the same time
+
- RY-WHO2 turns off if there is no pairing in 5 minutes.
LED Indicator
| Status | Lignt Color | Display |
|---|---|---|
| Power On | Blue | Flashing 3 times |
| Connected | Flashing once per 5s | |
| Reconnect | Flashing twice per 5s | |
| Play | Flashing once per 10s | |
| Pause | Flashing once per 5s | |
| Incoming Call / Dial | Flashing | |
| In Call | Flashing once per 3s | |
| Full Charged | Solid | |
| Battery Low | Red | Flashing |
| Charging | Solid | |
| Power Off | Flashing 3 times | |
| Pairing | Blue/Red | Flashing alternately |
Safety Cautions
- DON’T disassemble any part of the product to avoid fire or injury.
- DON’T expose the product under extreme sunshine or high humidity.
- DON’T use the oily volatile liquid to clean the product.
- DON’T use the product in an unsafe environment.
- Please use appropriate volume to avoid hearing damage.
- Please keep the product away from children or pets.
Specification
| Model | RY-WHO2 |
|---|---|
| BT Version | V5.0 |
| BT Profile | HFP,HSP,A2DP,AVRCP |
| Speaker Size | Φ10mm |
| Battery Capacity | 150mAh/3.7V |
| Standby Time | ≤100 Hours |
| Working Range | 10m |
| Operating Temperature | -10 ∼ 40°C |
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must withstand any interference received, including interference that may cause undesired operation.
Manufacturer
Shenzhen Hanke Technology Co.,Ltd Meipeng SKY311, No.3 Hebei Industrial Zone,
Zhongxing Road, Ma’antang Community, Bantian Street, Longgang District,
Shenzhen, Guangdong, China, 518000
Trouble Shooting
[Unable to connect] Step 1:
Press and hold ” ” for 3 seconds to turn on RY-WHO2 until the indicator light
flashing blue and red alternately into pairing mode.
Step 2:
Turn on the Bluetooth of your device and choose
Step 3:
The blue light of RY-WHO2 flash once when paired.
[ Reset] Step 1: Press and hold ” ” for 3 seconds to turn on RY-WHO2 until the
indicator light flashing blue and red alternately into pairing mode.
Step 2:
Press and hold ” ” and ” – ” buttons at the same time for 5 seconds to clear
the pairing history and try conncect again.
Warranty & Service
This product is covered with Rythflo product and labor warranty for 12 months
from the date of its original purchase.
Any concerns please email us as soon as possible, Rythflo will help you within
24 hours.
http://www.rythflo.coscan=1&size=800