Easee 7.4kW EV One Charging Unit, Type 2, Black Instruction Manual
- June 9, 2024
- easee
Table of Contents
Easee 7.4kW EV One Charging Unit, Type 2, Black
With the Easee Ready docking station, you get a completely electric vehicle (EV) ready charge point at low cost. By pre-installing the charge point, the Easee charger can subsequently be deployed upon demand with our innovative Plug & Play technology. This allows you to easily scale the system with no additional installation cost.
Forward-looking home charging
Benefits
- Integrated open PEN conductor protection, i.e., no need for earth rod
- Reduced cost and time to install
- Fully dynamic charging power 1.4–7.4 kW
- Load balancing of up to 3 units per fuse by integrated
- wireless communication
- Automatic queuing system
- Offline proof load balancing
- Integrated eSIM in each box, lifetime free subscription
- Possibility of WiFi connection
- Permanent locking of the Type 2 cable
- Integrated earth fault protection (RCD)
- Integrated RFID reader (NFC / ISO 14443 and MIFARE Classic®)
- Energy measurement (+/- 2 %), for reading charge consumption
- The box is 69 % smaller than other solutions and weighs only 1.5 kg
- 3 year warranty
- Universal, fits all types of electric cars and mains
- Full control with the Easee app or local WiFi interface, and open API
- Tethered or untethered, at the click of a button
Why choose Easee One?
3x
Optimized charging effect
You can have up to 3 Charging Robots on one fuse. All connected cars can be
charged at the same time, and the available power is distributed automatically
and dynamically between the vehicles. The total load will thus never exceed
the set limit for the fuse.
69%
Small
The Charging Robot is 69 % smaller and lighter than other electric chargers,
with similar functionality. It weighs only 1.5 kg! This means that we save the
environment at least 4 kg of copper and plastic per produced charger.
5 x
A colourful choice
Available in Black as standard, we have 4 other front covers available to
purchase: White, Anthracite, Red and Blue
eSIM
Internet access
All our Charging Robots are connected to the internet through mobile network.
If you buy now you get free mobile internet access throughout the lifetime of
the product. In order to get software updates and increased redundancy, we
recommend installing a local WiFi network, if there is no cellular coverage.
The local WiFi network must be connected to the Internet.
Assuming cellular coverage is available.
24/7
Always updated
The Charging Robot is updated with new features continuously. This way, you
know that you have purchased a safe and future-proof product.
3 yr
Warranty
We want you as a customer to have confidence that you have bought lasting
quality. A product from Easee comes
with a 3 year warranty.
Some countries may have extended warranty.
Made in Norway – for harsh weather conditions
We develop and manufacture our products in Norway. Our products are developed
for being able to withstand harsh environments. Not only is it tough, it is
also small! Our Charging Robot is 69 % smaller than other EV-chargers. It only
weights 1.5 kg. We have strived to contribute to a sustainable future and are
saving the enviroment for 4 kg of copper and plastics per produced charger.
The charger thrives just as well on the outside of a house as inside a garage.
Its components are of high quality and is composed in a very special way. It
is IP54 certified.
We want you as a customer to have confidence that you have bought lasting
quality. One product from Easee comes with a 3 year warranty.
Feel safe
We’ve added 3 extra levels of security, so that we can sleep well at night,
knowing that you can do it too. Safety is an important part of the design.
With an Easee Charging Robot you can be assured that charging is done safely.
The Charging Robot is designed to the latest standards. In addition, there is
built-in electronic earth fault protection that ensures detection of DC and
ground faults.
The Charging Robot is also equipped with temperature sensors and protection to
prevent overheating. You also don’t have to worry about crooks, the charging
cable can be permanently locked in the box via the app or the local WiFi
interface.
Easy when you get two electric cars
We have made it easy and affordable to invest in modern and forward-looking
charging infrastructure. With “Easee Ready” docking station you get a
completely EV ready charge point at low cost. By pre-installing an Easee One
charge point, it is possible upon demand to subsequently deploy our innovative
“Plug & Play” tech-nology at no additional installation cost.
The Charging Robot acts as an intelligent junction box and it supports the
expansion of multiple charging stations on the same cable.
Easee App
With the Easee app it is possible to control and plan when your car is
charging. You can see live values for the current charge session and get an
overview of your consumption. If you want to avoid finding the charging cable
every time you charge the car, you can easily lock the cable permanently in
the Charging Robot through the app.
You get full control over who can charge and when they can charge. We update
the app periodically to make your Charging Robot even smarter. Additionally,
with the Easee API further integrations and extended possibilities are
available.
Specifications
Measurement in mm
Technical
General
Dimension (mm): H: 256 x W: 193 x D: 106 Wall mounting (mm): c/c H: 160 x W:
125 Operating temperature: -30 °C to +50 °C Weight: 1.5 kg
Charging
Charging power: 1.4–7.4 kW (6 – 32 A) Number of phases: 1
Connection point: Type-2 socket (IEC 62196-2) Voltage: 230 V AC – single phase
(±10 %) Mains frequency: 50/60 Hz
Advanced load distribution
Up to 3 Charging Robots on the same circuit Accuracy of built-in energy meter
(±2 %)
Connectivity
Built-in eSIM (LTE Cat M1/ 2G /GPRS)
WiFi 2.4 GHz b/g/n connection
Easee Link RFTM
Control charging with the Easee app
RFID/NFC reader
OCPP 1.6 via our API
Open API
Sensors and indicators
Light strip showing the status of the charger Touch button for manual
adjustment Temperature sensors in all main contacts
Colours
-
Black*
-
*Compatible with other Easee front covers in White, Anthracite, Red or Blue.
Safety
Protection
Integrated overload protection according to EN IEC 61851-1:2019
Built-in RCD for ground fault protection (30 mA AC/ 6 mA DC) according to EN
61008-1 and IEC 62955
Integrated broken PEN lead protection according to BS 7671:2018/A1:2020
Degree of protection: IP54 (the backplate is IP22 without cover)
Impact resistance: IK10
Fire class: UL94
Insulation class: II
Over voltage category III
Theft Protection
Electronics can be deactivated and tracked in case of theft (contact support
if your device has been stolen).
The electronics can be permanently locked using a padlock (not included).
The charging cable can be locked permanently in the charging station.
Complies with the following regulations
2014/53/EU (RED)
2011/65/EU (RoHS)
2014/30/EU (EMC)
2014/35/EU (LVD)
See DoC for details at easee.support
Installation
Power grids and fuses
Installation network: TT, TN-S, TN-C and TN-C-S
Installation circuit breaker: Max 40 A overload protection. The short-circuit
current at the charging point (IkMax) must not exceed 10 kA. If required by
the installation method, type-A earth fault protection can be used for the
circuit.
Integrated circuit in backplate
Wire cross-section: up to 16 mm2 (single cable)/ up to 10 mm2 (parallel
connection) Cable diameter: 8–22 mm
Terminal tightening: 5 Nm
Cable strip length: 12 mm
The product contains
Distribution UK
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
The latest version of this publication can be downloaded at
http://easee.support
No part of this publication may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including, but not limited to, copying,
recording, retrieving data, or computer networks without the written
permission of Easee AS.
Easee and all other Easee product names and slogans are trademarks or
registered trademarks of Easee AS. Easee products can be protected by one or
more patents. All other products and services mentioned may be trademarks or
service marks of their respective owners.
Illustrations of the product and user interface are exemplary and may differ
from the actual appearance.
February 2022 – Version 1.02
© 2021 by Easee AS. All rights reserved.
Easee AS Grenseveien 19
4313 Sandnes, Norway Org.nr: 920 292 046
Easee is distributed and maintained by a network of qualified partners and resellers. Find more information and your local partner at:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>