ANTOP AT-601B Antennas Smartpass Antenna Amplifier Kit User Manual
- October 27, 2023
- ANTOP
Table of Contents
INDOOR DIGITAL TV
ANTENNA AMPLIFIER KIT
SMARTPASS AVPLIFIER & POWER SUPPLY
User Manual
AT-601W (White) / AT-601B (Black)
INSTRUCTIONS
Installation Instruction Manual
Your SMARTPASS AMPLIFIER & POWER SUPPLY KIT can be used with any non-
amplified/ passive antenna. ANTOP’s New Generation Digital Technology ensures
the best possible signal reception.
ANTOP’s New Generation Digital Technology
- Smartpass Amplifier, with all-in-one designsallows for easier connection and delivers the correct signal balance between short and long range reception.
- 56 LIT Cellular Filter: blocks 3G, 4G & 5G signals for noise-free TV reception.
- Compatible with Over-The-Air TV signals(87.5-700MHz).
What’s in the box
- Smartpass Amplifier
- USB AC/DC Power Adapter
- USB Cable 4. Instruction/User Manual (Instrucciones de Instalacidn en Espanol)
Technical Specification
-
Smartpass Amplifier
• Frequency Range: 87.5-700MHz
• Receiving Range: FM/VHF/UHF
• Gain: 16dB Max
• Output leve1:105dBuV Max
• Impedance:75Q
• Noise figure: S2dB
• Return Loss: >8d8
• Power Supply: DC 5V/50mA
• Size:2.90×1.26×0.70in
• TO TV: 3ft Extension Coaxial Cable Attached with F-male Connector
• TO Antenna: 0.3ft Extension Coaxial Cable Attached with F-female Connector -
USB AC/DC Power Adapter& USB Cable
• Input: 100-240W#50-60Hz, 150mA
• Output: DC SV 200mA
• USB Cable Length: 5ft
Following are instructions for installation. Read through all instructions prior to beginning installation procedure.
Instructions
-
Connecting
Connect the shorter end (0.3ft in length) of the coaxial cable to a non- amplified/passive antenna. Connect the longer end (3ft in length) of the coaxial cable to the ANTENNA/CABLE IN connector on the back of the TV or converter box. Connect the DC female plug of the USB cable to the DC socket in the Smartpass Amplifier, and connect the USB plug to the USB AC/DC power adapter. Connect the power adapter to a wall socket.
The Smartpass Amplifier must be powered in order to function. Push the Switch On or Off and select the setting with which more channels are received.
‘Switch Off – The LED indicates yellow for normal amplification.
‘Switch On – The LED indicates green for stronger amplification. **** Scan channels after each setting change to the Smartpass Amplifier -
Setting and Scanning
In the TV’s setup menu, set the mode to “Antenna” or “Air’, then, set TV to “Scan” for channels. Consult the N manual for detailed instructions.
Tips:
- The ANTOP Smartpass Amplifier must be powered for function.
- Re-scan the channels after each switching of the Smartpass Amplifier.
- Scan channels monthly to find all available channels including newly added or changed.
- Do not place or hide the Smartpass Amplifier and the antenna in/behind any metallic objects.
- Keep the over-the-air antenna away from any high power consumption devices to avoid interference.
- Move and rotate the over-the-air antenna at various locations for the best possible reception.
- The Smartpass Amplifier is not recommended for use with an amplified antenna.
- When using a Smartpass Amplifier with any non-amplified over-the-air antenna, note that antenna effectiveness is also influenced by its distance from the signal origination point, station signal strength level, building construction, antenna positioning, reflections from nearby structures and any power consumption sources.The amount of free over-the-air channels you can receive will vary by area and antenna selection.
WARRANTY POLICY
Customers should first contact their place of purchase to determine the reseller’s warranty policy. Antop Antenna’s warranty will take effect after the expiration of reseller’s policy. Antop Antenna, warrants its products for a period of one (1) year from the original date of purchase. Warranty is valid only with proof of purchase. Warranty does not apply to defects or failures of the product caused by: neglect, misuse, negligence, accident, abuse, mishandling, misapplication, alteration, modification, power outage, unauthorized/unreasonable use, or any uncontrollable environmental damage.
RETURNS & REFUNDS
For any return, customers should first contact their place of purchase to determine the reseller’s return policy. If purchased directly from Antop Antenna or before retuming tiredly to Antop Anterna, a Return Material Authorization (RMA) number must be obtained in advance by contacting Antop Antenna customer service via e-mail or telephone. Merchandise returned to Antop Antenna must have an RMA number displayed on the box and a copy of you proof of purchase inside the package. Absolutely no refund after 30 days of purchase from Antop Antenna. A restodting fee of 15% may be deducted from any refund, ask representative for further details. Refund policy for US & Canada customers only.
EXCHANGE & REPLACEMENT
For any exchange or replacement, customers should first contact their place of purchase to determine the reseller’s policies NgaagatigLeKcbameLfirspjffgreamcdleisstr3lal. One (1) Year limited manufacturer’s warranty for exchange of product due to malfunction, failure or defect, missing parts or components. Exchanges will be for the same item, model and/or SKU, within one (1) year of original purchase date. A Return Material Authorization (RMA) number must be issued by Antop Antenna prior to returning any product or part. To obtain an RMA, contact Antop Antenna via email or telephone.
SHIPPING & COSTS
Customer will be responsible for shipping costs of merchandise sent to Antop Antenna. Please consult a customer service representative for details. When shipping any item to Antop Antenna, please consider using a trackable shipping method. Antop Antenna cannot be held responsible for lost or misdirected shipments. Exchanged and returned products must be sent to: Antop Antenna, RMA Department, 1650 S. Balboa Ave, Ontario, California 91761. To receive a Return Material Authorization from Antop Antenna please send your request to RMA Dept Support@antopusa.com or to speak to Customer Service: via telephone, fil-F, 9am to 5pm (PST) 909-947-8883
www.antopusa.com
ANTOP ANTENNA INC
Tel. 909.947.8883
Email:support@antopusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>