SYNCO MA30 Microphone Arm Stand User Manual

: June 9, 2024
: SYNCO

Table of Contents

SYNCO MA30 Microphone Arm Stand
Specifications
Feature Introduction
Components Introduction
Operations
Warranty Conditions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SYNCO MA30 Microphone Arm Stand

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. Please contact the customer line if you have any questions or comments about the device. ✉ www.alza.co.uk/kontakt ✆ +44 (0)203 514 4411 Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Specifications

Material Aluminium
Colour Matter Black Painting
Net Weight 1.212kg (2.6lbs)
Maximum Bearing Weight 4kg (8.81lbs)
Upper Arm Length 36.5cm (14.37in)
Lower Arm Length 40cm (15.74in)
Clamp Length 8cm (3.14in)
Clamp Capacity 0-5cm (0-1.96in)

Mainly made of aluminium, MA30 Microphone Arm Stand is easily operational and equipped with aluminium clamp, ensuring firm grip strength. It can bear weight up to 4kg (8.81lbs) while be adjusted to multi-angle (maximum: 150°

Feature Introduction

Up to 4kg (8.18lbs) Bearing Weight
Collapsible Design
Adjusted to Multi-angle
Concealed Spring
Aluminium Clamp
Quality Steel Frame

Components Introduction

SYNCO-MA30-Microphone-Arm-Stand-FIG-1

Microphone Holder
Arm Stand
Aluminium Clamp
User Manual

Operations

Adjust [A] to make the clamp adapt to the desk, shelf, counter, etc. and tighten the screw.
Loosen [B] and adjust the bottom arm as per you need. Then tighten [B] to lock the knob.
Install the microphone holder to the 5/8” screw.
Please the microphone on the holder and ensure it is firmly held.

SYNCO-MA30-Microphone-Arm-Stand-FIG-2

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.