GLACIER BAY BTH-008-287-BN Paper Holder User Manual
- June 9, 2024
- GLACIER BAY
Table of Contents
GLACIER BAY BTH-008-287-BN Paper Holder User Manual
TOOLS REQUIRED
HARDWARE INCLUDED
Installation
-
Determining the mounting location
Determine the location where you wish to install your accessory.
Place the mounting bracket (B) at the desired location and mark the installation holes using pencil.
-
Drilling the pilot hole
Pre-drill a pilot hole with a small drill.
Safety Information
If installing into ceramic tile, before attempting to drill through ceramic tile, the following must be done:
Using a center punch, very lightly and carefully tap the spot where you wish to drill to break the shiny glass portion of the tile.
-
Installing the bracket in 3.1 drywall
Drill a 1/8 in. based on the pre-drill pilot hole.
Drive the drywall anchor (A) into the wall using a Phillips screwdriver until flush with the wall.
Align the mounting brackets (B) with the drywall anchor (A) and secure with the mounting screws (C).
NOTE: To install the brackets (B) in a wood stud, proceed to Step 3.2. To install the brackets (B) in ceramic tile, proceed to Step 3.3
-
Installing the bracket in wood stud
Drill 3/32 in. based on pre-drilled pilot hole.
Align the mounting brackets (B) with pilot holes and secure with the mounting screws
Installation (continued)
3.3 Installing the bracket in ceramic tile
Drill a 1/4 in. based on the pre-drill pilot hole
Tap 1/4 in. solid wall anchors (F) into the wall with a hammer until flush
with the wall.
Align the mounting brackets (B) with installed solid wall anchors (F) and
secure with the ounting screws (C).
Installing the bathroom accessory
Position the bathroom accessory over the mounting bracket (B) using the set
screw (E). Tighten securely with the Hex wrench (D).
Care and Cleaning
These bath accessories are designed for years of trouble-free performance. Keep them looking new by doing the following:
- Clean periodically with a soft cloth.
- Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty
Warranty
Glacier Bay products are manufactured with superior quality standards and
workmanship and are backed by our limited lifetime warranty. Glacier Bay
products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any
product or parts that proves defective. Simply, return the product / part to
any of The Home Depot retail locations or call 1-855-HD-GLACIER
(1-855-434-5224) to receive the
replacement item. Proof of purchase (original sales receipt) from the original
consumer purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to
misuse, abuse or normal wear and tear. This warranty excludes all industrial,
commercial & business usage, whose purchasers are hereby, extended a five year
limited warranty from the date of purchase, with all other terms of this
warranty applying except the duration of warranty.
Some states and provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations may not apply to
you.
This warranty gives you specific legal rights and you may also have other
rights that vary from state to state and province to province. Please see a
store or contact 1-855-HD-GLACIER for more details.