teesa ZAB0030 Electric Scooter Fast Wheels Pro 250w User Manual

ZAB0030 Electric Scooter Fast Wheels Pro 250w
User Manual

Before operating this vehicle, read all the instructions and keep it for future reference. This manual includes useful tips and tricks as well as important safety information on the use and handling of the device.
The producer does not claim liability to any damages or injuries caused by inappropriate use and handling of the device. Please note, the sole responsibility of using the vehicle lies with the user.

SAFETY INSTRUCTIONS

• Protect this product from moisture, humidity, water, and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.

• Before connecting the device to the power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.

• This appliance may be used by children who are above 14 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge if they are supervised and guided by a person who is responsible for their safety in a cautious manner, and all the safety precautions are understood and followed. Children should not play with this device. Children should not perform cleaning and servicing of the device unsupervised.

• The product is not suitable for the use of persons whose health might be in danger in case of possible falling down from the vehicle (children, the elderly, pregnant women, etc.).

• Please note, the height of the front pole of the vehicle is not adjustable. Make sure the user’s height is appropriate for using this scooter.

• Do not use the product in case of abnormal operation.

• Use only authorized accessories.

• Do not attempt to repair/disassemble this device yourself. In case of damage, contact with an authorized service point for a check-up/repair. NO USER-SERVICEABLE PARTS INSIDE THIS DEVICE!

• In case of error notification on the display of the kick scooter, turn off the device and turn it back on after a moment. If the error notification is displayed again, contact an authorized service point.

• In case of E55 error notification (device overheat), turn off the kick scooter and wait until it’s cooled down. Restarting the device should be performed only after the kick scooter has completely cooled down!

• ALWAYS disconnect this device from the power supply mains before cleaning.

• Do not use this device near flammable products.

• Do not drive after drinking or taking drugs/medications of any kind or any other substances which may affect your cognitive or motor skills.
  IMPORTANT:  When driving this vehicle, you should comply with local laws and regulations including traffic laws. The producer is NOT responsible for any injuries, damages, accidents, losses, legal disputes, and all other unfavorable events resulting from disregarding the standards, regulations, or legal measures concerning using such vehicles. Sole responsibility is on the user of the vehicle! Follow the regulations and laws being in force in the area. In case of any doubts, the local laws and regulations shall prevail.

• Users should take into consideration that risk of accidents, injuries or damages cannot be entirely avoided as other road participants may violate traffic regulations and drive incautiously. Keep in mind that you might be as exposed to road accidents as when walking or riding a bike.

• The vehicle is designed for one person at a time only! It’s prohibited for two persons to drive the vehicle at once.

• Do not lift the device off the ground when it is turned on. Do not turn it on in midair.

• Do not ride this device off of curbs, ramps, or attempt to operate in a skate park, empty pools, or any way similar to a skateboard. Do not attempt any tricks or stunts. This vehicle is not suitable to ride upstairs, downstairs THIS KICK SCOOTER IS NOT A SKATEBOARD.

• Do not climb up or down steep hills.

• Do not jump off or on your scooter.

• Do not step, stand or lean on the fender. The kick scooter does not have a foot brake in the fender. Pressure on the rear fender may lead to mechanical damage of the fender!

• DO NOT touch disc brake

• Always check the vehicle before using it for abnormalities or damages. Do not use the scooter in case of any damages!

• IMPORTANT:  Product warranty does not cover elements that are subject to natural wear out during use.

Ingress protection rating

This product is water-resistant and dustproof based on IP54 rating, which prevents from the intrusion of solid objects (limited protection against dust ingress) and provides protection from water splashing against the housing.
IMPORTANT: Water and dust protection rating is not permanent, and can decrease over time, as a result of everyday usage of the device. Despite the IP54 rating, the device is not resistant to damages in certain situations. The warranty does not cover mechanical or liquid damages.
Remember to keep the charging port’s rubber plug tightly closed to ensure protection against water and dust ingression.

Preparation before operation

Before using the vehicle, make sure:

• the battery is fully charged
• tires are in good condition
  Note:  in case of a tire stall, the device will automatically shut down.

Weight limitations
Please note, the vehicle poses restrictions concerning the user’s maximum weight (120 kg). Do not overload the vehicle, as it may lead to damage and injuries.

Warning – Possible risk of driving
Any damages or injuries caused by use disregarding the instruction manual falls under the responsibility of the user. Do not perform sudden swerves when driving fast, as it may cause danger.

Safe driving

• Be sure to apply all appropriate safety measures when operating this vehicle.

• Remember to wear a helmet, knee pads, elbow pads, and other protective gear.

• Relax your legs while driving, slightly bent your knees, it can help maintain balance when encountering uneven ground.

• In the process of driving, ensure that both feet are always placed on the deck.

• Avoid driving on steep slopes, through potholes, puddles, or bumps.

• The weight of the user and their belongings should not exceed the maximum load indicated in the instruction. Overload may lead to injuries or damages.

• Ensure the vehicle’s speed is safe for you and others.

• Keep a safe distance from other vehicles to avoid collisions.

• It is not recommended to turn the handle at high speed, especially in the case of new users who are still not fully comfortable with riding the scooter at high speed.

• Do not accelerate when riding downhill.

• Do not press on the accelerator when walking the scooter.

• Do not hang heavy objects such as a backpack on the handlebars.

• Do not use your mobile device when driving the kick scooter! Always hold both handles when driving.

• Keep in mind that when you are on the vehicle, your height has increased. Remember about that when driving i.e. through the door.

• Do not drive this vehicle on rainy or snowy days. Do not drive on the slippery ground (i.e. snow, ice, wet surfaces). Before each use, ensure the charging port rubber plug is tightly closed.

• Do not drive on surfaces made of loose fabric or covered in items that could get in/entangle in the wheels (e.g. thick carpet).
  Riding tips

• It is recommended to wear comfortable clothing that does not block, limit or restrict movements of the user.

• Wear comfortable, flat shoes to maintain flexibility and full motion range.

• Practice your riding skills in an open space, on flat and even surfaces. Avoid places with pedestrians and obstacles before you feel you are comfortable with your driving skills. Make sure you’ve mastered getting on the vehicle, accelerating, coming to a stop, and making turns before you try higher speed.

• WARNING:  The higher the scooter’s speed is, the longer it will take to stop it fully.

• Hint: use the ECO mode when learning how to drive. Normal and Sport mode due to higher speed is suitable for users who are experienced and comfortable with driving this vehicle.

• Pay attention when driving near cables and cords!

• Slow down when on uneven ground!

• Before each use, make sure the device is in proper condition. At regular intervals, at least every three months, check all screws and other elements are secure and safe to use.

PRODUCT DESCRIPTION

1. Accelerator
2. Disc brake’s handle
3. Scooter handle
4. Folding mechanism lock
5. Folding mechanism lever
6. Front-wheel / motor
7. Deck
8. Foldable kickstand
9. Charging port
10. Battery indicators
11. 12. Rear-wheel
12. Rear light
13. Front light
14. Speedmeter
15. Fold buckle hook
16. Bell
17. Disc brake
18. Fold buckle
19. Mode indicator (ECO – eco mode; D – normal mode; S – sport mode)
20. Bluetooth connection indicator
21. Fault indicator
22. Light indicator

OPERATION

Assembly
Perform the assembly as indicated below:

1. Lift the front pole up. Close the folding mechanism lever and secure the folding mechanism lock.
2. Install the crossbar on the standpipe.
3. Use the allen key to lock the screws on both sides.
4. After the assembly, press the power switch to turn the vehicle on and check the installation.
   Folding/unfolding
   To fold the kick scooter, open the folding mechanism lock and pull the folding mechanism lever down. Pull the front pole down. Use the folding buckle and fasten it on the fold buckle hook to secure the scooter in the folded position.
   To unfold the kick scooter, unhook the folding buckle and pull up the front pole. Push the folding mechanism lever up and secure the folding mechanism lock.

Power switch

• When the scooter is powered off:
  » Press and hold to turn on.

• When the scooter is powered on:
  » Press once to turn on/off the lights.
  Note:  the rear light will blink when the disc brake is used, regardless of whether the lights are turned on or off.
  » Press twice to change driving mode (ECO / D (normal) / S (sport)).
  » Press and hold to turn off.

Operation steps

1. Press and hold the power button to turn the kick scooter on. Check the battery level before operation.

2. Step on the deck with one foot and use the other foot to push away to make the wheels spin. When the wheels are already in motion, press the accelerator slightly to start the vehicle.
   NOTE:  the device has a NO ZERO SPEED START function – the accelerator will not be effective unless the speed of the scooter is at least 5 km/h.

3. Press the brake’s handle to slow down or stop the scooter. Do not stop too suddenly as it may pose a risk of falling!

4. Press and hold the power button again to turn the device off when it’s no longer in use. Note: If you don’t switch the device off, it will stay on for 10 minutes allowing you to step on it and continue riding without engaging on/off switch. If not used within that period, it will automatically switch off after the time is up.

Speed meter

The scooter has a built-in speed meter. It automatically turns on when the scooter is switched on and shows the current speed of the scooter.
Range (cruise distance on one battery charge)
Speed, as well as distance on one battery charge the vehicle, can cover depend on many factors, and thus may decrease in relation to:

• topography: uneven surface will shorten the range and decrease speed;
• weight of the user: the speed and range will be lower in case of heavier load;
• temperature: extreme temperatures shorten the range and lower the speed, the battery performance decreases quickly in cold conditions;
• maintenance: proper handling, charging, etc. will optimize the range distance and speed;
• speed: moderate, economic driving will optimize distance; while frequent starts, stops, changes of speed reduce the distance.

Disc brakes adjustment

If you feel the disc brake is too tight or loose, use the screw cap indicated to adjust it:

• rotate clockwise to tighten the brake,
• rotate it counterclockwise to loosen the brake.

Front pole adjustment
If you feel the front pole is shaking, use allen key to tighten the screws on the folding mechanism.

APP CONTROL

1. Find the „REBEL Fastwheels PRO” app on Google Play Store. Download and install the app on your mobile device.
2. Turn ON the Bluetooth function on your mobile device.
3. Turn ON the scooter.
4. Open the app. The app will perform searching for available devices, and display a list of found devices. Connect with your scooter.

Note: producer does not guarantee compatibility of the app with every Android device.
Users can access the app only when the mobile device is connected with a kick scooter. Once connected, the main screen of the app shows basic information:

1. Speed meter
2. Current speed
3. Battery percentage
4. Speed limit info
5. Bluetooth connection interface (open to display available devices)
6.  Lock function switch (press to turn on/off. The padlock icon is locked when the lock function is active. The function forbids driving on the kick scooter – the wheel is blocked. Do not attempt to try to drive on the kick scooter!)
7.  Light switch (press to turn on/off)
8. Settings
9. Mode switch (press to change drive mode. In-app, the user can change between D mode (normal) and S (sport))
10. Information on the device
11. Cruise control (press to turn on/off)

HINT:  When the lock function is active, user will not be able to turn off the scooter! You have to deactivate the lock function first to turn off the function. Also, when the lock function is on, the auto switch-off function is not available.

Enter Settings

1. Cruise control: turn cruise control on/off

2. Cruise condition speed: once the cruise control function is on, the user can set the minimal cruise control speed (below-set speed the function will not work).

   • To activate the function, start driving, achieve constant speed keep it up (for at least 5 seconds) until the kick scooter issues a sound. The cruise control function will be activated (the cruise control icon on the main app screen will be bright green and there will be a circle rotating around it). Users can release the accelerator and the kick scooter will keep the constant speed. To deactivate, press the brake or accelerator. The cruise control function will be inactive but still ON.
   • Please note, the cruise control speed can
     NOT be higher than the speed limit. Otherwise, the minimum speed for the cruise control function will be beyond the speed limit.

3. Battery capacity: Set the battery capacity value to achieve the most accurate calculations of the estimated remaining driving mileage. For ZAB0030 it’s 7,8 Ah.

4. Energy recovery intensity: this function prolongs battery usage on one charge. When the wheels are running and the accelerator is not pressed in, it generates electricity (this electricity is not from the battery).

5. Driving mode change: select the appropriate mode. Once you select the desired mode, the respective speed limit slider will be active:

6. Sport mode speed limit (sets device’s limit in sport mode)

7. Comfort mode speed limit (sets device’s limit in normal “D” mode)

Enter information on the device to see

1. Estimated remaining driving mileage (please note, data provided here is only an estimated value based on numerous factors, e.g. remaining battery level). Remember to set the correct battery capacity value in settings.
2. This driving mileage (of the current route): distance covered since the last turning on of the device
3. Total driving mileage (total distance covered since first turning on of the device)
4. Vehicle’s temperature (please pay attention to this value. If the temperature is abnormally high, turn off the vehicle and wait until it’s cooled down)
5. Total running time (total time since first turning on of the device)
6. Current speed
7. Error code: in case of a kick scooter error, the device kick scooter will display an error code on the display and the app will display an error code in this spot. Contact an authorized service point for more information.
8. Firmware upgrade: enter this tab to check for available upgrades

BATTERY AND CHARGING

Battery
Always check the battery level before using. Do not ride when the vehicle’s battery is low Charge the battery when the battery indicator signals a low level.

• Do not use the device if the battery gives out any odor or excessive heat or when there’s leakage.
• Do not disassemble nor modify the battery!
• Do not use the device when it is charging!
• Ensure the charging port is dry prior to charging!
• Charge the vehicle only with the included/authorized power adapter.
• Do not continue driving when the battery reaches a minimum, as this will affect the battery’s life.
• Do not store the device unused for longer than 4 months without charging as it may result in battery damage.
• Charge the battery after each use to keep it in optimum condition.
• Do not charge the device in temperature below 0ºC or above 40ºC.

Charging

1. Plug the charger into main socket (100-240 V, 50/60 Hz). The light on the charger lights up green.
2. Plug the other end of the charger into the vehicle. The indicator on the charger will turn red.
3. When the indicator turns from red to green, the charging is complete. Disconnect charger from the device and power mains outlet. Do not overcharge the device, as it may affect battery life.

IMPORTANT:  Remember to close the rubber plug after the charging is completed to ensure protection against water and dust ingression.

Indicators

Power
5 LED indicators signalize battery level:

1. 100-80%: 5 indicators constantly on
2. 79-60%: 4 indicators constantly on
3. 59-40%: 3 indicators constantly on
4. 39-20%: 2 indicators constantly on
5. 19-0%: 1 indicator flashing

WARNING:  Always check the battery level before using. Do not ride when its battery is low, as indicated by 1 flashing LED indicator – charge the vehicle before using the scooter again.

Specifications of battery

• Rechargeable lithium-ion battery
• Voltage: 36 V
• Capacity: 7,8 Ah
• Working temperature: 0ºC~+50ºC
• Storage temperature: -20ºC~+50ºC
• Charging temperature: 0ºC~+40ºC
• Relative storage humidity: 5~95%
• Approximate charging time: up to 240 minutes
• Charger:
  • Input: 100-240 V, 50/60 Hz
  • Output: 42 V; 2 A
• Protections: overheat, short circuit, over-discharge, overcharge, overload

CLEANING

• Do not clean this device when in the process of charging!
• Clean the unit’s exterior periodically with a soft, slightly damp cloth. Never use chemical agents to clean this device.

STORAGE

• Do not store the vehicle if its battery level is very low or discharged. Charge the battery before storage to prevent battery over-discharge due to a long time non-use.
• It is recommended to charge the device’s battery every 2 months if the vehicle is left unused to maintain the longevity of the battery.
• Do not wrap up the vehicle or place it in the package right after charging it, as it may get warmer during charging – the risk of fire.

SPECIFICATION

General

• Power: 250 W
• Motor: brushless
• Maximum load: 120 kg
• 3 driving modes: ECO, normal and sport
• Maximum speed (sport “S” mode): 30 km/h*
• Maximum speed (normal “D” mode): 20 km/h*
• Maximum speed (ECO mode): 10 km/h*
• Range (per charge): up to 18~25 km*
• Maximum slope: 14º
• IP rating: IP54
• Chassis height: 82 mm
• Platform height: 150 mm
• Wheels size: 8,5”
• Material: aluminum
• Foldable construction

Functions

• Auto power off
• Disc brake (hand brake)
• Front light
• Rear light
• Footrest
• Bell
• Speed meter
• Dedicated app control
• Mobile app compatibility: Android OS

please note, range/max. speed is directly dependent on numerous factors and it represents the maximum approximate value

Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that electric scooter ZAB0030 is consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.eu.

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS

CE DECLARATION OF CONFORMITY

Producer: LECHPOL ELECTRONICS
Equipment: Electric kick scooter
Brand: REBEL
Model: ZAB0030
We, undersigned, hereby declare that the equipment specified above conforms to the following directives including its newest changes:

1. EMC 2014/30/EU
   EN 55022:2010
   EN 61000-3-2:2014
   EN 61000-3-3:2013
   EN 55024:2010+A1:2015

2. LVD 2014/35/EU
   EN 60335-2-82:2003+A1:2008
   EN 60335-1:2012+A11:2014

3. ROHS 2011/65/EU with further changes 2015/863

4. Machinery Directive 2006/42/EC
   EN ISO 12100:2010
   EN 60204-1:2006+A1:2009+AC:2010

Name and address of the person residing or registered in the EU, authorized to prepare technical documentation: Year of CE marking application: 2019
LECHPOL ELECTRONICS declares that this declaration has been issued under its sole responsibility.
www.rebelelectro.com

References

• Lechpol Electronics Leszek - producent i dystrybutor produktów elektronicznych!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>