SIGURO SGR-SK-N610W Manicure and Pedicure Set Instruction Manual

SIGURO SGR-SK-N610W Manicure and Pedicure Set

Thank you for purchasing a SIGURO appliance. We are grateful for your trust and we are pleased to introduce to you the appliance on the following pages and acquaint you with all its functions and uses. We believe in a fair and responsible company, and therefore we only work with suppliers who meet our strict criteria of protecting the interests of their employees, preventing their abuse and providing fair working conditions.

If you need help with extensive maintenance or repair of the product, which requires intervention in its internal parts, our authorized service is available to you at the email address siguro@alza.cz or operators at the seller’s infoline. For your convenience in solving any problems with the product, we have unified these contact points and the above contacts can be used in the event of any complaints or post-warranty service.

SAFETY INFORMATION

Please read this manual carefully before use and keep it for future reference.

1. This appliance must not be used by children or persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, even if they are supervised or have been instructed in the safe use of the appliance and understand the possible dangers.

2. Children are not allowed to play with the appliance, so keep it out of their reach.

3. Do not use the appliance if you have inflammation of the fingers or toes, allergies, skin injuries, etc.

4. Do not use the appliance on children, incapacitated persons or persons who cannot express their feelings.

5. Do not use the appliance if you are uncomfortable using it.

6. This appliance is made for the treatment of fingernails (manicure) and toenails (pedicure). Do not use it for purposes other than those for which it is intended.

7. Use only the attachments supplied with the appliance. Using other attachments puts you at risk of loss of warranty, product damage or serious injury.

8. This appliance is intended for personal household use only. It is
   not intended for commercial use e.g. in beauty salons or similar establishments. The use of this appliance is not a substitute for medical care.

9. Do not leave the appliance unattended while it is charging.

10. The appliance may get hot while the built-in battery is charging and during use. This is normal. However, take extra care if the appliance becomes hot.

11. Do not immerse the appliance in water or other liquids. Use only dry cloth for cleaning.

12. Do not expose the appliance to dripping or splashing water.

13. Do not expose the appliance to extreme temperatures, direct sunlight or open flames.

14. Do not disassemble, modify or otherwise deform the appliance.

15. If the appliance does not work, shows signs of damage, the outer cover is cracked, etc., stop using it and contact an authorised service centre. It is forbidden to use a damaged appliance. There is a risk of serious injury. Do not repair the appliance yourself. It does not contain parts that the user can replace or repair himself.

16. Store the appliance in a dry and well-ventilated place.

DISPOSAL OF THE BUILT-IN BATTERY

The product is equipped with a built-in battery. This must be removed before the product is disposed of in an environmentally friendly manner or taken to a collection point. The battery must only be removed by a qualified person at an authorised workshop. Switch the product on and wait until the battery is completely discharged. Then remove it from the product. The battery contains harmful substances for the environment and therefore does not belong in normal municipal waste. Take the battery to an appropriate collection point for environmentally friendly disposal.

OVERVIEW

1. Protective cap
2. On / Off button
3. Rotation direction adjustment button
4. +/- buttons to adjust the rotation speed
5. USB charging port (in the back)
6. Felt cone
7. Ceramic cutter
8. Cylindrical cutter
9. Needle cutter
10. Polishing roller
11. Cone cutter
12. Protective sleeve for attachments
13. USB cable (not shown)
14. Carry bag (not shown)

TECHNICAL PARAMETERS

USE

Charging
Plug one end of the USB cable into the charging port and plug the other end into the AC adapter (not included). Plug the plug into a properly grounded power outlet. The LED light will flash red, indicating that the appliance is charging. When the LED light turns blue, the appliance is fully charged.
If the LED lights up red during use or after switching on, the appliance must be charged. In this case, the appliance will switch off automatically.
Charging time is usually 2.5 hours. The continuous operation time of a fully charged appliance is approximately 90 minutes.

Inserting the attachment
Remove the attachment you want to use from the protective sleeve.
Insert the attachment into the hole in the head of the appliance until you feel resistance. Make sure the attachment rotates freely.
If you need to replace the attachment, pull it out of the appliance head.
Warning: Always make sure the appliance is switched off before fitting or changing the attachment.

Attachments and their use

1. The cone cutter is used for filing natural and acrylic nails. Easily shortens and shapes nails. It is also suitable for removing dry skin around the nails.
2. The needle cutter is used to remove dry cuticles and helps remove dead cells from the lateral nail folds.
3. The cylindrical cutter is used for filing natural and acrylic nails. It files the edges of the nail and polishes all the grooves to make the nail surface smooth. It is also used to clean the nail bed.
4. The polishing roller is used for filing and removing dead skin cells around the nail bed and on the sides of the nail.
5. The felt cone is used to polish and smooth the nails after filing.
6. The ceramic cutter is used for quick removal of nail glue.
   Warning: There is a risk of injury if handled incorrectly.

USE

1. Press the on/off button for about 2 seconds to switch the appliance on. The attachment starts to rotate.
2. Press the rotation direction setting button and select the left or right rotation direction. The direction of rotation changes after about 1 second.
3. Use the +/- buttons to set the desired rotation speed. Use the + button to increase the speed, the – button to decrease the speed. A short press changes the speed by one degree. Long press to change the speed continuously. The speed can be selected in six stages.
4. If you are not going to use the appliance, press the on/off button for about 2 seconds and the appliance will switch off.
5. Wait until the attachment stops rotating and clean it and the appliance according to the instructions in the “Cleaning and Maintenance” section.

CLEANING AND MAINTENANCE

Always switch off the appliance and wait until the attachment stops rotating before cleaning or carrying out any maintenance.

Warning:
Never immerse the appliance in water or any other liquid. Do not use plastic or metal scrapers, harsh cleaners, chemicals, petrol, solvents or other similar substances to clean any parts of the appliance. The surface finish could be heavily damaged.

1. Wipe the outer surface of the appliance with a soft cloth slightly dampened with warm water. Wipe dry.
2. Rinse used attachments in clean water, remove any dirt and wipe dry.
3. Make sure the attachments are completely dry before reassembling.

Storage
Before storing, make sure the appliance and its attachments are clean and dry. Store everything in a protective case, keep it in a dry and well-ventilated place out of reach of children or pets. Do not place any objects on the case.
If you will not be using the appliance for a long period of time, we recommend that you charge the built-in battery regularly to extend its life. Recharge it every three months.

TROUBLESHOOTING

it.
The appliance will not switch on.| The appliance is discharged.| Charge the appliance.

The appliance charging LED is not lit.

| ****

The USB cable is not plugged in correctly.

| ****

Check the connection of the USB cable to the charging port and to the AC adapter.

The attachment is not straight.| ****

The attachment is not fitted correctly.

| ****

Remove it and reinsert it.

The attachment easily falls out of the appliance.

If the problem is not listed in the table above or if the problem persists, switch off the appliance, disconnect the plug from the electrical outlet and contact an authorized service center.

WEEE
The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item.
This product meets all of the related basic EU regulation requirements.
The EU declaration of conformity is available on www.alzashop.com/doc.
This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).

Alza.cz, a. s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic
© 2022 Alza.cz,a.s. All Rights Reserved.
www.siguro.net

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Siguro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>