SIGURO SGR-LM-T680SU Wall Mounted LED Makeup Mirror Instruction Manual
- June 9, 2024
- SIGURO
Table of Contents
SIGURO SGR-LM-T680SU Wall Mounted LED Makeup Mirror
Translation of the operating instructions from the original language.
Thank you for purchasing a SIGURO appliance. We are grateful for your trust
and we are pleased to introduce the device to you on the following pages and
acquaint you with all its functions and uses.
We believe in a fair and responsible company, and therefore we only work with
suppliers who meet our strict criteria to protect the interests of employ-ees,
prevent their abuse and fair working conditions.
If you need help with extensive maintenance or repair of the product, which requires intervention in its internal parts, our authorized service is available to you at the email address siguro@alza.cz or operators at the seller’s infoline. For your convenience, in solving any problems with the product, we have unified these contact points and the above contacts can be used in case of any complaints or post-warranty service.
SAFETY INFORMATION
Please read this manual carefully before use and keep it for future reference.
-
The cosmetic mirror is intended for use by children 3 years of age and older and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning use of the appliance in a safe manner and understand the dangers.
-
Children must not play with the device. Cleaning and maintenance must not be done by children without supervision.
-
Keep the packaging out of the reach of children. There is a risk of suffocation.
-
Before use, make sure that the cosmetic mirror and accessories have no visible damage. If in doubt, do not use it and contact an authorised service centre.
-
Do not disassemble, modify or repair the cosmetic mirror. It does
not contain any parts that the user can fix himself. Have all repairs or adjustments carried out by an authorized service center. -
Do not insert pointed or sharp objects into any holes.
-
Protect the cosmetic mirror from falls or bumps. If it has fallen or been otherwise damaged, it must not be used again.
-
Only use the cosmetic mirror indoors and handle it with dry hands.
-
The cosmetic mirror must be positioned in such a way that there is no danger of falling into the water or on the ground. Do not use the mirror in the bath or shower.
-
If the power cable is damaged, it must be replaced with the same type. Contact and authorized service centre.
-
This cosmetic mirror is intended for personal use at home only. It is not intended for commercial use.
-
Do not place the cosmetic mirror in a position where it could reflect the sun’s rays.
-
Do not place the cosmetic mirror near heat sources or open flames.
-
Do not use or store the cosmetic mirror in areas where flammable or explosive substances are stored. Do not use the cosmetic mirror in dusty environments.
-
The built-in battery contains harmful substances. Should electrolyte leakage occur, avoid direct skin contact; ensure that it does not enter the eyes; in case of ingestion, seek professional medical attention immediately.
-
Use only the fasteners supplied or recommended by the manufacturer for installation. Follow the instructions in this manual to attach the mirror to the wall. If you are unsure, please contact a qualified person. The manufacturer shall not be liable for damage to property and health in the event of use of fasteners other than those supplied or recommended, in the event of failure to follow the instructions given in this manual, etc.
DISPOSAL OF THE BUILT-IN BATTERY
The product is equipped with a built-in battery. This must be removed before the product is disposed of in an environmentally friendly manner or taken to a collection point. The battery must only be removed by a qualified person at an authorized service center. Switch the product on and wait until the battery is completely discharged. Then remove it from the product. The battery contains harmful substances for the environment and therefore does not belong in normal municipal waste. Take the battery to an appropriate collection point for environmentally friendly disposal. This symbol indicates an IP44 rating. The product is protected against the ingress of solid foreign bodies with a diameter of 1 mm and larger. The product is protected against water splashing from all directions.
OVERVIEW
- Main mirror area
- Lighting LEDs
- Switch
- Frame
- Micro USB charging connector (on the the side)
- Handle
- Holder
- Wall mounting kit
Not pictured:
Micro USB charging cable
- Power 5 V, 2 A
- Power consumption 4.7 W
- Built-in battery Li-Ion 3,8 V, 2000 mAh
- Dimensions 36.1 × 2.5 × 44.5 cm (including unfolded holder)
- Weight 915 g
- Number of LEDs 72
- Magnification 1×/5×
USE
Before first use
Remove the mirror and its accessories from the packaging. Before disposing of
the packaging, be sure to remove all components. Check the mirror and
accessories for damage. Wipe the outer surface of the mirror with a soft, dry
cloth.
Installation
- Select the correct installation location. Make sure that the mirror can be fully extended and rotated freely. Choose a place where the mirror will not obstruct the opening/closing of doors, windows, doors, etc. It is not advisable to install the mirror in places with high dust levels, above radiators, near heat sources or open fires.
- Before starting drilling, check that there are no power lines, water, gas or other pipes at the installation site.
- Release the washer from the bottom of the holder.
- Place the washer against the wall and mark with a pencil where the holes will be drilled.
- Using a drill with a suitable drill bit, drill two holes.
- Insert plastic dowels into the holes.
- Screw the washer to the wall using the screws provided.
- Place the mirror holder on the washer and secure with the locking screws.
- Put the screw caps on the locking screws from the outside. Make sure that all parts are firmly attached – see Figure A on page 3.
- Insert the handle into the hole in the holder.
Charging
- Insert the Micro USB plug into the power connector on the side of the base.
- Insert the USB-A connector into the power connector of the AC adapter (recommended 5 V/2 A) or your computer.
- The charging light next to the charging slot lights up.
- When the charging light turns off, the built-in battery is fully charged.
Note:
Make sure the mirror lighting is switched off before charging.
Use
- Make sure the built-in battery is fully charged before use.
- Press the switch briefly and the mirror light will come on.
- Press and hold the switch for 3 seconds to adjust the brightness of the lighting.
- By briefly pressing the switch repeatedly you will switch the lighting colour temperature between warm, natural and cool.
- Press the switch again briefly to switch off the mirror illumination.
- The mirror is double-sided and can be rotated.
CLEANING AND MAINTENANCE
Always turn off the mirror and make sure the Micro USB cable is disconnected before cleaning or performing any maintenance.
Warning:
Never immerse the mirror in water or any other liquid.
Wipe the outer surface of the mirror with a soft, dry cloth.
Do not use plastic or metal scrapers, harsh cleaners, chemicals, petrol,
solvents or other similar substances to clean any parts of the mirror. The
surface finish could be seriously damaged.
Storage
Before storing, make sure the mirror is clean and the Micro USB cable is
disconnected. Store the mirror and its accessories in a dry and well-
ventilated place out of the reach of children or pets. Do not place any
objects on it.
If you will not be using the mirror for a long period of time, we recommend
that you charge the built-in battery regularly to extend its life. Recharge it
every three months.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>