NANAMI HM002 Wireless Charging Station User Manual

: June 4, 2024
: NANAMI

Table of Contents

Product Overview
Specifications
Installation procedure for the Apple Watch charging stand
Packaging including
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HM002 Wireless Charging Station
User Manual NANAMI HM002 Wireless Charging Station

Thank you for shopping! Please read this user manual Be careful before using the product and user manual keep it properly for reference.

Product Overview

NANAMI HM002 Wireless Charging Station - overview

Specifications

Model: HM002
FCC ID: 2AXMG-HM002
Input: AC100V-240V 50Hz-60Hz 4A Max
Output: Total 161W Max,
USB-C1 5V/3A,9V/3A,12V/3A,15V/3A,20V/5A, PPS: 3.3V-11V/5A
USB-C2 5V/3A,9V/3A,12V/3A,15V/3A,20V/5A, PPS: 3.3V-11V/5A
USB-A1 5V/3A,9V/2A,12V/1.5A
USB-A2 5V/3A,9V/2A,12V/1.5A
Wireless Charger Output: 5W/7.5W/10W/15W
Wireless AirPods Charger Output: 5W
Wireless Watch Charger Input: 5V/1A
Simply install the charger cable for the iWatch (NOTE: There is not included the original magnetic charger for Apple Watch) Wireless charging distance: 3-8mm
Weight: 655g±5g
Size: 254124.6157mm

HM002 desktop multiple devices charging station’s ports output power distribute

1 USB-C port output power| 100W Max
1 USB-A port output power| 18W Max
USB-C1+USB-C2 Output power| 65W+30W(95W Max)
USB-C1+USB-A1 Output powe| 100W+18W(118W Max)
USB-C1+USB-A2 Output powe| 100W+18W(118W Max)
USB-C2+USB-A1 Output power| 100W+18W(118W Max)
USB-C2+USB-A2 Output power| 100W+18W(118W Max)
USB-A1+USB-A2 Output power| 18W+18W(36W Max)
USB-C1 +USB-C2+USB-A1
Output power| 65W+30W+18W
(113W Max)
USB-C1+USB-C2+USB-A2
Output power| 65W+30W+18W
(113W Max)
USB-C1+USB-A1+USB-A2
Output power| 100W+18W+18W
(136W Max)
USB-C2+USB-A1+USB-A2
Output power| 100W+18W+18W
(136W Max)
USB-C1+USB-C2+USB-A1+
USB-A2 otal output power| 65W+30W+18W+18W
(131W Max)
USB-C1+USB-C2+USB-A1+
USB-A2 +Phones wireless charge+Earphones wireless charge+Wireless Watch Charger Input Total output power| 65W+30W+18W+18W+
15W+5W+5W
(161W Max)

Installation procedure for the Apple Watch charging stand

Remove the watch charging stand, open the bracket along the gap, removing the round plastic shell from the stand.
Put the magnetic charging end of the original watch wireless charger and part of the USB cable in the stand. And close the stand.
Pass the bracket with the watch wireless charger through the HM002 charging station installation port; and connect it with the USB port.
Roll up the charging cable into the slot,and close the back cover.

Tips:
a. If it is a watch wireless charger with a USB-C port, please connect the USB-C port to the USB-C to USB-A adapter(come with the HM002)first.
b. If it’s a wireless watch charger with a USB-C port installed, attach the included Apple Watch silicone pad to the bottom of the charger.
How to use

Please connect the AC charging cable to the HM002 charging station;
Please plug the AC charging plug(adapter) into the supply socket. When it connects, the three blue LED indicators in the charging station will light. The blue LED indicator in USB ports will keep bright blue, and the phone’s and earphone’s indicators are only light blue when the devices are charging. If there are some foreign bodies or face some abnormal situation, the LED indicators will stop light blue and start light red.
You can use the USB-C to USB-C or USB-A to USB-C cables that come with the charging station to charge your devices like smartphones or laptops, or you can use the original cables.

Tips:

The charging station can provide up to 161W charging power when only one device connects. When charging many devices, there may be some power consumption when distributing current to different ports.
When multiple devices connect,a brief pause of the charge in devices being charged will appear when plug-in a new device or plug-out the charging devices.
It is normal and caused by charge current redistribution.
Due to the continuous high power output, the temperature may up to the safe temperature range when normally used. It is normal.
Please be sure your devices can be compatible with the desktop charging station.

Packaging including

1X HM002 Charging Station
1X Detachable Power Cable 1.2m
1X Apple Watch charging stand
1X USB-C to USB-C 100W charge cable 1m
1X USB-C to USB-C charge cable 0.2m
1X USB-A to USB-C charge cable 0.2m
1X USB-A to Micro USB charge cable 0.2m
1X USB-A to USB-C adapter
1X Apple Watch silicone pad(for Apple Watch Magnetic Fast Charger to USB-C Cable)
1X User Manual

Notice

Please do not disassemble, impact, crush it or throw this product into the fire.
Please do not use the wireless charger under severe high temperatures, humidity, or corrosive environment to avoid the circuit being damaged, which will lead to infinite leakage.
Please keep it away from magnetic cards (ID Card or Bank Card) with magnetic stripes or chips, for it may cause magnetic failure.
Please don’t put a metal or metal case on the charger.
Please keep the distance between the implanted medical device (pacemaker, implant cochlea, etc.) and wireless charger at least 20cm.
Please keep the charger away from water or other liquid.
If the charger needs cleaning, please make sure the power is off.
Please do not let children play it as a toy.
Please keep the temperature is between 0 ℃ to 40 ℃ when yo using it.

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.