NANAMI HM006 3 In 1 Wireless Charger User Manual

June 1, 2024
NANAMI

NANAMI HM006 3 In 1 Wireless Charger

NANAMI-HM006-3-In-1-Wireless-Charger-product

Specifications

  • 3 IN 1 WIRELESS CHARGER
  • Phone Charging Area
  • Watch Charging Area
  • Charging Diagram
  • Can be placed vertically or horizontally
  • Non-slip mat
  • Intelligent LED Light

Step-by-Step Guide to Using the Wireless Charger

  1. Place the wireless charger on a flat surface.
  2. Connect the charger to a power source using the provided cable.
  3. Ensure the phone and watch charging areas are clear and free from any obstruction.
  4. For phone charging, place your phone on the designated charging area.
  5. For watch charging, place your watch on the designated charging area.
  6. The intelligent LED light will indicate when the devices are charging.
  7. You can choose to charge your devices vertically or horizontally based on your preference.

Frequently Asked Questions (FAQ)
Q: How do I know if my devices are charging?
A: The intelligent LED light on the wireless charger will indicate when your devices are charging. A solid light usually means the charging is in progress.

User Manual

3 IN 1 WIRELESS CHARGER HM006

Notice: To ensure charging 3 devices safely and efficiently, the OEM 9V/2A adapter and quick charging cable is recommended, also you could use adapter with rating power over 18W. (Qualcomm Quick Charger 2.0 or 3.0) .Using an inappropriate adapter and quick charge cable may affect the charging effect, even damage the charger or your phone.

Product Appearance

NANAMI-HM006-3-In-1-Wireless-Charger-01

Product Introduction

The 3-in-1 wireless charger, a compact charging station, powered by only one outlet,which is able to charge 3 devices simultaneously. When charge your mobile phone, watch and earbuds, just put them on the charger stand, the wireless charging will automatically start. The charger is space saving, which makes your desk clean  & tidy and your life easier.

NANAMI-HM006-3-In-1-Wireless-Charger-02

Using Steps

  1. Connect the charger stand to the power supply with the OEM adapter and charging cable before charging.
  2. Put the mobile phone on the phone charging area to charge.
  3. Put the watch on the watch charging area and adjust the magnet to charge.
  4. Put the earbuds on the earphone charging area to charge.

Product Specification

  • Input:5V-3A;9V-2A;12V-1.5A
  • Phone Output: 15W Max
  • Watch Output:2.5W
  • Earphone Output:3W
  • Input Interface: Type-C port
  • Transmission Distance(Phone):≤5mm
  • Conversion Rate(Phone):≥73%
  • FCC ID: 2A4NL-HM004
  • IC: 26522-HM004

Charging Schematic Diagram

NANAMI-HM006-3-In-1-Wireless-Charger-03

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals