Cattara 13192 Solar Charger 10W Foldable User Manual
- June 9, 2024
- Cattara
Table of Contents
Cattara 13192 Solar Charger 10W Foldable
Device description
Foldable 10 W solar charger, for charging devices using a USB cable (not included in the package) when traveling, on trips, and during other outdoor activities. The device is portable and can be attached to, for example, a backpack using the carabiners.
Technical data
- USB output voltage: 5 V = max. 1,5AIUSB)
- dimensions: 44x165cm
- transport dimensions: 19×11 x3,5cm
- weight: 320g
- solar panel: mono cell
- efficiency: 19.5%
Use
- Spread the solar panel on the ground, or fasten it using carabiners to a suitable place, directly illuminated by sunlight.
- Lit LED indicator of the USB module indicates a functional power supply.
- Connect your device using a USB cable (not included) to the USB port on power module.
- After charging your device, fold the panel back into transport dimensions and store it.
Caution
- The power supply starts by itself, immediately after being directed to sunlight.
- If the panel is covered or the intensity of sunlight decreases, the charging speed will decrease or the power supply will stop completely. The power supply is automatically restored when the light intensity increases again.
- Both the solar panel and the USB module may heat up during charging, do not leave device in direct sunlight when not in use.
Maintenance and storage
- Wipe the device with a damp cloth if the panels become dirty or clogged.
- Do not use chemical cleaning agents or solvents for cleaning.
- Store device in a dry place and in transport(packed) condition.
Warning
- Protect from scratching.
- Do not bend the device.
- Protect from water and rain.
- Protect device from fire and do not leave it on direct sunlight when not in use.
- Do not open or modify the USB module or solar panels.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>