Cattara 13596 Gas Stove Instruction Manual

Cattara 13596 Gas Stove

Instructions for use

Gas stove for reheating and preparing food.

Stove for outdoor use is equipped with 2x burners and have piezoelectric ignition for convenient and quick use. Stove is equipped with gas flow regulation for precise flame adjustment.

The stove is made of an all-metal construction that guarantees maximum durability. The upper part uses hinged lid.

Device is designed to be connected to a large gas tank that can be connected on the back. For connection, it is necessary to use a hose with a regulating valve (not included in the package).

Technical data

Conditions for device operation

The device is intended for operation in an outdoor environment, in the garden, campsite, etc.

Device consumes oxygen during its operation, user’s life can be seriously endangered due to lack of oxygen and increased concentration of CO2 in unventilated or closed rooms !

The minimum distance between appliance and other objects must be at least 0.5 m.

Check the device regularly, especially before use. Check the tightness, the cleanliness of the nozzle, the cleanliness of the piezo igniter and the correct functionality of device.

Suitable gas and pressure regulator

• This gas appliance is only suitable for use with low-pressure gas cylinders filled with butane, propane or LPG mixture, equipped with an appropriate low-pressure regulator and flexible hose. The hose must be equipped with a regulator gauge and secured with hose clips.
• The operating pressure of this appliance is set to 28-30 mbar for Butane gas, 37 mbar for Propane gas and 30 mbar for LPG mixtures.

Device check before startup

• Open the cover.
• Check that the burners are not dirty.
• Check that the piezo igniters are not dirty

Maintenance

• Always carry out device maintenance at regular intervals and in cases of greater contamination. Allow device to cool down. After disconnecting the gas, make sure that the valve and nozzle are not dirty. It is advisable to check the valve regularly and protect it from dirt. The piezo ignition coil can be cleaned with a metal brush. The outer sides and cover can be cleaned with a damp cloth. Always allow the device to dry thoroughly after washing.

Connecting a gas cylinder

• Make sure the control valve is closed (turn fully to the right to close).
• Connect the hose (not included), put it on the adapter and secure it with the clip (not included).
• The hose must be equipped with a regulating valve (not included in the package).
• Make sure that the gas container is equipped with a valve to close the gas supply, or it is necessary to equip it with an exhaust valve (not included in the package).
• Connect the other end of the hose/regulating valve to the gas container.
• Make sure all parts are connected correctly.
• Now it is convenient to perform a leak test with soapy water.

Turning device on and off

• Turn the control valve to the left.
• Press the piezo igniter to ignite flame.
• The burning intensity can be adjusted by closing (right) or opening (left) the valve using the controller.
• The burner is extinguished by fully closing the valve using the controller (turning to the right as far as it will go).
• Do not manipulate with device while the gas is burning.
• When turning off, always make sure that the flame has really gone out!
• Close the gas supply.

Cooking and heating food

• Device must be placed on a flat surface.
• After ignition, pans/pots (max. diameter 23 cm) can be placed on the grate.
• Device should always remain clean, do not overfill the pot! (there is a risk of extinguishing the fire and clogging the burner)

Storage

• Appliance and the gas container must be stored separately.
• Store the appliance in closed, well-ventilated areas that do not contain aggressive substances, at a temperatures of up to 10°C and a relative humidity of up to 80%.

Security requirements

• The device may only be operated by an adult over the age of 18 according to this manual! During operation, the operator must also respect the general fire safety regulations!
• The device must be stored out of the reach of children!
• Do not use the device if it is leaking, damaged or if it is not working properly!
• If you want to check for leaks (tightness) of your appliance, do it outdoors. Do not detect leaks with an open flame, use soapy water!
• Accessible parts of the device near the burner are very hot during and immediately after operation!
• Prevent small children from accessing the appliance!
• During operation, the device must be placed on a nonflammable pad and kept under supervision!
• From the point of view of fire safety, the device must be located at least 50 cm from combustible materials!
• Check the tightness in a well-ventilated room, or in an outdoor environment, away from sources of ignition and out of reach of other people!
• Protect the gas container from sunlight!
• It is forbidden to use the appliance in rooms and spaces below ground level!
• For safety reasons, do not modify the device parts!
• Do not use device in strong winds!
• Do not move device while it is operating!
• Do not connect device to a gas source other than specified in the instructions!
• Do not use the appliance in an environment where you work with ethereal substances, paints, adhesives, etc.!
• The device may only be operated by adults. Persons (including children) with limited physical, sensory or mental abilities, as well as persons with a lack of experience and/or lack of necessary knowledge, may only use the product under the supervision of an experienced person who will ensure their safety or provide them with instructions for use.

Defects and their elimination

Fault: The burner cannot be lit.

• Check the gas content (after disconnection, there is no movement of the contents of the bottle when shaken). Attention, as the temperature decreases the amount of gas also decreases. The pressure decreases, and so that the performance of device decreases accordingly.
• If the burner nozzles are clogged (and cannot be cleaned) or if there is a malfunction in the valve (ignition), contact a professional service.
• If the electrode of the piezo igniter is clogged or wet, clean it and let it dry.
• If the piezo igniter electrode is bent, bend it back to the burner.

WARNING

Device consumes oxygen during operation and in a nonventilated room (trailer, tent, cabin, boat, etc.), the user’s life can be seriously endangered due to lack of oxygen and increased concentration of CO2! It is always necessary to ventilate. It is necessary to ensure a sufficient supply of combustion air and at the same time it is necessary to prevent any dangerous accumulation of unburnt fuel near the stove! Butane is physically heavier than air, and in the event of a spontaneous release, due to a leak, it sinks and accumulates near the ground.

Disposal

If you decide to dispose of the old appliance, put it in the designated place (Collection yard).

Note

Changes in technical data are reserved. Due to the continuous innovation process, the images are non-binding. Typographical errors reserved.

DECLARATION OF CONFORMITY

We Zhejiang Aofeng Electrical Appliances Co., Ltd NO.19 SHENBAO ROAD BAIYANG WUYI JINHUA, ZHEJIANG, China

declare under our sole responsibility that the following product

Gas Stove
Zhejiang Aofeng Model: AOTE-6002
COMPASS Model: 13596

is in conformity with the

EX Type-Examination Gas Appliance Directive EU 2016/426 & Standard EN 498:2012 & EN 484:2019

Modul B

Intertek Italia S.p.A., Via Miglioli, 2/A – 20063 Cernusco sul Naviglio, Milano – Italy (Notified Body 2575), Certificate No. ITS-2575-GAR-2128815-R3, Date of issue 15.3.2022, Valid until 16.5.2023 and the following harmonised standards and technical specifications have been applied:

We declare under our sole responsibility that when the products identified above to which declaration relates, are supplied to other non-English speaking countries of European Economic Area , their technical instructions , packaging , markings and appliance markings will contain the same technical information as the EC type-examined version and will be in the official language of those countries.

Economic Area countries are listed as below:

GB,IE — English FR — French DE — German AT — German
LU — German NL — Dutch DK — Danish NO — Norwegian
SE — Swedish FI — Finnish IT — Italian ES — Spanish
CZ — Czech Republic SK — Slovak Republic

This appliance , it controls and ancillary parts do not contain asbestos nor any substance that could constitute a hazard to health. Furthermore , any appliance submitted will not be electrically unsafe.

The material used are appropriate for their intended purpose and can withstand the technical, chemical and thermal conditions to which they will foreseeable be subjected.

The properties of materials important for safety are hereby guaranteed by the manufacture or supplier of appliance.

Zhejiang, 20/3/2022 Zhejiang Aofeng Electrical Appliances Co., Ltd

Customers Support

Compass CZ s.r.o. Pražská 17, 250 81 – Nehvizdy, CZ, e-mail: info@compass.cz
last revision 11/2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>