Alza ZEAPON AA-E1 Micro3 Slider Motor User Manual
- June 9, 2024
- alza
Table of Contents
Alza ZEAPON AA-E1 Micro3 Slider Motor
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7,
www.alza.cz
Function Description
Micro3 slider motor is compatible with of lengths of 500/700/1000 sliders.
Function Introduction
| Name | Function |
|---|---|
| Power Indicator Light | Green: full power Yellow: medium power Red: low power |
Blue: on
Speed Indicator Light| The number of lights from 1 to represent the low,
medium, and high speed respectively
Waypoint Release Button| Holding the Waypoint Release Button for 1s, after the
green light flashes, the motor stops, and starts to set the waypoint, you can
manually drag the slider. After selecting the waypoint, press the Waypoint
Release Button again, the green light is always on, the motor starts, and the
waypoint setup over.
Left| Slider moves to the left
Right| Slider moves to the right
Power Button| Power switch/waypoint creating
2.5mm shutter
release cable port
| The slider can be directly connected to the camera through the
shutter cable to control the camera’s photo function.
USB Type-C Port| Power supply to the slider motor (5V/2A)
Fixing screw| For fixing the motor on the slider
Battery compartment| Compatible with F550/F750/F970 lithium batteries
Battery lock| For fixing the battery to the battery compartment
Function| Pressing the button| Beep
---|---|---
Turn on the power| Long press the power button 3s| /
Turn off the power| Long press the power button 3s| /
Move left| Long press the left button| /
Move right| Long press on the right button| /
Speed adjustment| Click the power button| /
Create waypoint| Double click the power button| Waypoint 1 set, beep once
Waypoint 2 set, beep twice
Clear all waypoint| Long press left button + right button| One long beep
Getting Started| Double click the power button| /
Loop starts/pauses| Click (left button/right button + power button)| Beep once
Auto left/right movement| Double click left/right button| /
Setting waypoint manually| Holding the Waypoint Release Button 1s and
the green light of the button flashes, Drag the slider to set up waypoints
manually.| /
Slider motor installation
A detailed video of operation can be viewed on the official
website:https://www.zeapon.com
Setting waypoint through physical buttons
- Press and hold the power button 3s to power on
- Press and hold the left button to make the slider run to the desired position
- Double-click the power button to set the A point
- Long press the right button to make the slide run to the desired position
- Double-click the power button to set point B
- Double-click the power button to start or click (left button/right button + power button) to start looping.
- Press and hold the power button 3s to power on
- Holding the Waypoint Release Button 1s and flash green light
- Drag the platform on the slider to your preferred position
- Double-click the power button to set point A
- Drag the platform on the slider to your preferred position
- Double-click the power button to set point B
- Double-click the power button to start or click (left button/right button + power button) to start looping
(Due to the large torque of the motor, more force is required when dragging the platform, please hold the support leg of the slider with one hand and drag the platform with another hand set up waypoint. Physical button can only set AB two points, cell phone APP can set multi-point track.
Setting waypoint through APP
- Press and hold the slider motor power button 3s to power on
- Open the app and connect the corresponding slider
- Holding the Waypoint Release Button 1s and flash green light
- Drag the platform on the slider to your preferred position
- Click the position to set the as point A
- Drag the platform on the slider to your preferred position
- Click the position to set the as point B
- Drag the platform on the slider to your preferred position
- Click the position to set the as point C
- Click the start button, the slide will run from point A to point C
Five waypoints from A-E can be set via the APP.
Tips
Please go to the major application markets to search “Zeapon Lab” or ZEAPON official website to download and install the APP!
Please note: this product does not provide batteries and battery chargers, if necessary, please purchase separately!
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized
representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Slider Motor
Model/Type: AA-E1
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
- ZEAPON - Home