NAKAYAMA BS3000 Cutters and Hedgetrimmers User Manual
- June 9, 2024
- NAKAYAMA
Table of Contents
NAKAYAMA BS3000 Cutters and Hedgetrimmers User Manual
Assembly Instructions
Important information
- Please read through the manual carefully.
- Battery can only be charged indoors.
- Double insulation, grounding not required.
- Fail-safe transformer charger.
- Battery charging will automatically cut off when overheating occurs.
- Dispose battery charger separately from household waste.
- Dispose battery separately from household waste.
Product Description
This product is a battery-driven electric pruning shear, comprises components
designed for cutting or trimming 45mm or less branches in fruit orchards,
vineyards, etc. Simple and easy to operate, it also has 8-10 times the
efficiency of traditional manual pruners. Pruning quality is significantly
higher as compared to manual pruners.
Please read through all the safety warnings an instructions carefully.
Failure to follow warnings and instructions may result in electric shock, fire
and serious burns and other accidents. Do not use or expose electric pruning
shear in rainy conditions. Never place hands near the cutting area of the
electric pruning shear during operations.
-
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
-
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
-
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Product Components
- Movable blade
- Fixed blade
- Latch pin
- Trigger
- Fixed power cord
- Lubrication hole
- Charger AC plug
- LED light indicator
- Electric Pruning Shear’s power input connector
- Control Housing’s output plug
- Control Housing’s input plug
- Buzzer
- Blade opening adjustment switch (Large: 45mm/1.8” Small: = 25mm/1”)
Product Operation
- Take the specially backpack (picture 1), put the electric pruning shear into the holster and put the battery into the battery bag.
- First, align the power cable connector’s input connector jack connects to the control housing’s output connector jack on the work vest. Then, control housing’s input connector jack connects to the battery’s output connector jack.
- Remove the pruner from the holster, switch ON the battery, to power On position, Due to the first time usage that the control housing gets power, it will buzz for 2 times, double click the trigger, the pruner blades will automatically open.
- Normal pruning: press trigger to close the blades and release the trigger to open blades. Switch blade opening: continue to press the trigger, one buzz means the blade will open to small- 30mm. continue press the trigger, two buzzes means the blades will open to big 45 mm. Blade closure: continue to press the trigger, a continual buzz means the blade will stay closed. Switch off the buzzer sound: Press the trigger and let it buzz for 3 times, the buzzer sound will turn off.
- Before operation, in order to see if the pruner functions well, please press the trigger to close and release the trigger to open the blades without cutting anything. Repeat this for a few times.
Failure tips
| Buzzer Sound Frequency Times | Failure | Solution Method |
|---|---|---|
| 1 | Battery capacity failure | Check if battery capacity is low |
| 2 | Communication failure | Check if every part of cable connector is loose |
| 3 | Blade failure | Oil on blade |
| 4 | Motor phase loss | Send it to local dealer for maintenance |
| 5 | Motor phase line short-circuit | Check if cable or head of the connector has |
short —circuit caused
6| Control Housing failure| Send it to local dealer for maintenance
Packing up
- Press the trigger and hold for a few seconds and then release, the blade will close and will not open.
- Switch off the battery, disconnect the power cord from battery.
- Tidy up, clean up and pack the pruner into the tool box.
Battery Charging (Picture 2)
It is recommended to charge new battery before the first use of the electric
pruning shear. To charge the battery, ensure the battery power switch is in
OFF position. Plug the battery charger output into the battery charging jack
then plug the charger into a power socket. The LED indicator on the battery
will turn RED during charging and turn GREEN when the battery is fully
charged.
Oil on the lead screw nut (Picture 3)
Please oil on the lead screw nut after pruning shear is on working 7 days or
shear force is reduced significantly
Cautions
- Before charging, please ensure battery power switch is in OFF position. During charging, it is normal for the charger and battery to be warm.
- If the battery is not use for a long period of time, it recommended to charge the battery once every 3 months, this is to ensure the battery life is not affected by low usage.
- For new battery or battery unused for a long time, it will need about 5 charge-discharge cycles before achieving full capacity.
- Do not recharge a fully charged battery just after a few minutes of usage, this will reduce the battery lifespan and efficiency.
- Do not use a damaged battery and do not disassemble the charger or battery.
- Do not place battery near high temperature heat source, the battery will explode in fire or long exposure to high temperature heat source.
- Do not charge the battery in outdoor or humid environment.
- It is normal for the pruning shear to reduce cutting diameter when the battery capacity is getting low.
- Do not use the pruning shear during charging. It must be disconnected from the battery during charging.
- Do not store the battery in a humid environment.
Blade replacement (Picture 4)
When the moving blade no longer crosses the fixed blade throughout its length, or when the power pruner could no longer have a clean cut after grinding, blade replacement is recommended with the following steps:
- For safety, before replacing the blade, please ensure the prun
- Refer to the diagrams below on the procedure to replace the blade.
- Clean up the blade after replacing, connect to power cable to battery, power ON to test the blade, close up the blade to complete the whole procedure.
- Fixed and movable blades can be replaced individually; do not worry about the size of the replacement blade aperture, the opening will automatically return to normal size during power ON after completing blade replacement.
Operation Precautions
Usage and Care for Pruning Shear
- Do not cut branches beyond the specified diameter indicated, do not cut hard items such as metals, stone or any other non-plant materials. If the blades are worn or damaged, please replace the blades.
- Keep the pruning shear clean, use a clean cloth to clean the pruning shear, battery and charger (do not use any abrasive or solvent-based cleaning agent), use a soft brush or a dry to clean the dust off the pruning shear head.
- Do not immerse the pruning shear, battery or charger in any liquid.
- Follow instructions as given for proper use of the pruning shear, do not use the pruning shear when the tool itself, battery or charger is damaged.
- Do not use the pruning shear if it could not operate or shut down properly, send for servicing immediately. It is dangerous to use the pruning shear when the tool could not operate or shut down properly.
- Please ensure the power pruner is powered OFF during any adjustment, changing accessories or storage. This protective measure aims to reduce the risk of accidental pruning shear activation.
- Please ensure the blades are closed when not in use, storage of the pruning shear must keep out of reach from CHILDREN, do not allow any person who is not familiar with the pruner operation or instruction to use the pruning shear, it is dangerous to use the pruning shear without proper training and understanding.
- The use of the pruning shear must comply with instructions stated in this manual and methods of use as well as taking in considerations of the working environment and nature of work undertaken. The use of the pruning shear not within its stated capability and specifications is dangerous.
- Remove all dirt from the moving and fixed blades after each use, thereafter apply lubricant on the blade side where both moving and fixed blade contact. This will ensure the blades are maintained in good conditions and reduce resistance during use prolonging the pruner and blade lifespan.
Usage and Care for Battery
- Do not charge battery with ambient temperature below 32°F (0°C) or above 113°F (45 °C).
- Please ensure the battery is switched off before connecting the power cord to the battery.
- Only use battery charger as supplied together with the pruning shear; the use of any other charger not matching to the charging specification of the battery may cause fire.
- Items such as paper clips, coins, keys, nails, screws, or any other conductive items must be keep away from battery when not in use.
- Do not disassemble the battery.
- Do not short-circuit the battery.
- Do not use the battery beside heat source.
- Do not put the battery in fire or in water.
- Do not charge the battery near fire or under direct sunlight
- Do not insert nail into the battery, hammer the battery, stomp the battery, throw the battery or any other form of shocks to the battery.
- Do not use battery that is damaged or deformed.
- Do not perform soldering or welding on the battery.
- Do not reverse direction of charging battery, reverse polarity of connections or excessive discharge of battery.
- Do not connect the battery to charging outlets or car cigarette lighter socket.
- Do not use the battery on equipment other than the designated pruning shear.
WARRANTY
This appliance is a quality product. It was designed in compliance with current technical standards and made carefully using normal, good quality materials. The warranty period is 24 months and commences on the date of purchase which can be verified by the receipt, invoice or delivery note. During this warranty period all functional errors, which, despite the careful treatment described in our operating manual, are verifiably due to material flaws, will be rectified by our after-sales service staff. The warranty takes the form that defective parts will be repaired or replaced with perfect parts free of charge at our discretion. Replaced parts will become our property. Repair work or the replacement of individual parts will not extend the warranty period not will it result in a new warranty period being commenced for the appliance. No separate warranty period will commence for spare parts that may be ted. We cannot offer a warranty for damage and defects on appliances or their parts caused by the use of excessive force, improper treatment and servicing. This also applies for failures to comply with the operating manual and the installation or spare and accessory parts that are not included in our range of products. In the event of interference with of modifications to the appliance by unauthorized persons, the warranty will be rendered void. Damages that are attributable to improper handling, over loading, or natural wear and tear are excluded from the guarantee. Damages caused by the manufacturer or by a material defect will be corrected at no charge by repair or by providing spare parts. The prerequisite is that the equipment is handed over assembled, and complete with the proof of sale and guarantee. For a guarantee claim, only use the original packaging. That way, we can guarantee quick and smooth guarantee processing. Please send us the appliances post-paid or request a Freeway sticker. Unfortunately we will be unable to accept appliances that are not postpaid. The warranty does not cover parts that are subject to natural wear and tear. If you wish to make a warranty claim, report faults or order spare parts or accessories, please contact the aftersales center below: Subject to change without prior notice.
DISPOSE OF PACKAGING RESPONSIBLY
DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE
Documents / Resources
|
NAKAYAMA BS3000 Cutters and
Hedgetrimmers
[pdf] User Manual
BS3000 Cutters and Hedgetrimmers, BS3000, Cutters and Hedgetrimmers,
Hedgetrimmers
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>