EMOS V0125 Universal Smart USB Adapter Instructions
- June 9, 2024
- EMOS
Table of Contents
V0125 Universal Smart USB Adapter
Instructions
USB Network Adapter SMART
V0125 Universal Smart USB Adapter
Instruction manual:
Please read and follow the instruction manual carefully before using the
device.
Description and options:
SMART series charging adapter
SMART = USB output parameters (V; A; W) are divided based on connected
devices up to the adapter‘s maximum values.
The adapter is designed for charging the batteries of compatible devices – see
technical specifications. First connect cable to the adapter and the device,
then plug in to the power supply socket. After charging is complete, unplug
the adapter from socket. Charging speed and charging values are dependent
not only on the output of the adapter but also the quality of the connected
cable and set options/parameters of the device which monitor and adjust
charging values on the input.
Technical specifications:
input voltage: 100–240 V AC
max. USB output: 5 V DC/2.1 A/10.5 W
max. total adapter output: 2× USB/5 V DC/3.1 A/15.5 W
protection against overload, overvoltage and short circuit
LED indication: none
compatibility: smartphones, tablets and other devices
dimensions: 27 × 39 × 80 mm (depth × width × height)
colour: white
weight: 50 g
Care and maintenance:
- Do not expose the product to humidity (e.g. in the bathroom) or outdoor weather conditions.
- Designed for use in dry indoor areas.
- Do not use the product in close proximity to IT equipment and other electrical devices.
- This device is not intended for use by children or persons whose physical, sensory or mental disability or lack of experience and expertise prevents safe use, unless they are supervised by a person responsible for their safety.
- Clean using a moistened cloth.
Safety instructions:
- Ensure the adapter is connected to correct voltage. Voltage exceeding the limits may damage or destroy your device.
- Never try to open or disassemble the product.
- Do not short-circuit the connectors.
- Disconnect the USB adapter from power when it‘s not being used.
- Always turn your device off before you connect it to the adapter and begin charging.
- Charging the device while it‘s on can damage the battery or cause the device‘s firmware to malfunction.
- Prevent improper handling of the device and always observe the principles of using electrical appliances.
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfi ll, dangerous substanoes may reach groundwater and subsequently food chain, where it could affect human health.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>