RAB LCBLUEREMOTE/W Lightcloud Blue Remote Instructions
- June 9, 2024
- RAB
Table of Contents
RAB LCBLUEREMOTE/W Lightcloud Blue Remote
Hello
The Lightcloud Blue Remote lets you control your
Lightcloud Blue-enabled lighting from anywhere onsite. Manage on/off
switching, dimming, color temperature tuning, and set programmable buttons for
custom scenes. The Remote can be mounted to a single-gang wall box or directly
to a wall.
Product Features
- Wireless Control & Configuration
- ColorTuning
- Dimming
- Decorator Wall Plate
Specifications
Catalog Number:
- LCBLUEREMOTE/W
Specifications:
- Voltage: 3V
- Battery type: CR2032
- Amps: 1 OmA
- Battery life : 2 years
- Range: 60ft
- Warranty: 2 year limited
What’s in the Box
- (1) Lightcloud Blue Remote*
- (1) Faceplate bracket
- (4) Mounting screws
- (1) Installation guide
- (1) Backplate
- (l) Faceplate
Quick Setup
- Confirm your device is powered on.
- Download the Lightcloud Blue app from the Apple App Store or Google” Play store
- Launch the App and create an account.
- Tap the “add device” icon in the app to start connecting devices
- Follow the remaining steps in the app. Create Areas, Groups, and Scenes to organize and control your devices.
- You’re all set
Function
Remote button functions
Installing or changing battery
- Remove the cover on the back
- Install CR2032 battery in the compartment positive(+) side up
- Replace back cover
Wall Mounting
- Screw backplate to the wall
- Snap the faceplate onto backplate
- Remove the battery spacer
- Attach remote to the faceplate
Reset
- Method 1 : Press and hold the “RESET” button for 3s. A red indicator light will appear in the top left corner of the face of the remote when reset is complete.
- Method 2 : Press and hold the “ON/OFF” and “Function l” (. .) buttons together for Ss.A red indicator light will appear in the top left corner of the face of the remote when reset is complete.
Functionality
Configuration
All configuration of Lightcloud Blue products may be performed using the
Lightcloud Blue app.
WE’RE HERE TO HELP:
1 (844) LIGHTCLOUD
1 844-544-4825
support@lightcloud.com
FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any interference received,
including interference that may cause undesired operation.
Note :This device has been tested and found to comply wlth the limits for
Class B digital devices pursuant to Part 15 Subpart B, of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residentlal environment. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or televlsion reception, which can be determined by
turning the equipment off and on, the user is encouraged to tiy and correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/1Vtechnician for help.
To comply with the FCC’s RF exposure limits for general population /
uncontrolled exposure, this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter. The
manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
CAUTION : Changes or modifications to this equipment not expressly
approved by RAB Lighting may void the user’s authority to operate this
equipment.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter. Radiation Exposure
Statement The device has been evaluated to meet general RF exposure
requirement. in portable exposure condition without restriction.
Lightcloud Blue is a Bluetooth mesh wireless lighting control system that
allows you to control RAB’s various compatible devices. With RAB’s patent-
pending Rapid Provisioning technology, devices can be quickly and easily
commissioned for residential and large commercial applications using the
Lightcloud Blue mobile app.
Learn more at www.rablighting.com
1 (844) LIGHTCLOUD
1 844-544-4825
RAB
©2022 RAB LIGHTING Inc. Made in China.
Pat.rablighting.com/ip