BenQ BL2785TC Portable Monitor Instruction Manual

BenQ BL2785TC Portable Monitor

Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU
on waste electrical and electronic equipment (WEEE)

Materials and components with hazardous content

LCDs may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the printed circuit boards assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.

• Product Name: LCD Monitor
• Model No.: BL2785TC, GW2785TC, GW2785TE

Disassembly Tools

Philips Screwdriver for M3 Screw

| ****

Nosed Pliers

| ****

Diagonal Cutting Pliers

| ****

Slotted screwdriver

| ****

Six Point Sockets

| ****

Philips Screwdriver for M2.5 Screw

| ****

Knife

| ****

Disassembly process

1. Remove ASSY Stand
2. Remove base by pressing release Screw.
3. Remove ASSY CLMN by hand.
4. Remove ASSY Rear Cover
5. Remove one screw on back side to release Rear Cover.
6. Remove Slider module and lens from RC by Screwdriver and hand
7. Remove SPK wire
8. Remove SHD and PCB.
9. Remove Tape Adhesive & Wire disconnect.
10. Remove mylar and screw by screwdriver.
11. Remove wire by hand.
12. Disassembly DECO
13. Unsrew MF & PNL screw*11 pcs
14. Disassembly MF & Panel
15. Disassembly AMB LNES, Control BD, DIIMC BD, and Sensor BD
16. Disassembly Column
17. Disassembly Base

Disassembly Time

Total time: 30 minutes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>