OMCAN BS-CN-1651-T 65 Inch Tabletop Stainless Steel Meat Band Saw Instruction Manual
- June 9, 2024
- OMCAN
Table of Contents
- BS-CN-1651-T 65 Inch Tabletop Stainless Steel Meat Band Saw
- General Information
- Safety and Warranty
- Technical Specifications
- Installation
- Operation
- Maintenance
- Parts Breakdown
- Electrical Schematics
- Warranty Registration
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BS-CN-1651-T 65 Inch Tabletop Stainless Steel Meat Band Saw
Instruction Manual
Band Saws
Models BS-CN-1651-T, 2020, 2400
Items 46785, 46786, 46787
Instruction Manual
BS-CN-1651-T 65 Inch Tabletop Stainless Steel Meat Band Saw
Revised – 05/05/2022
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: service@omcan.com
www.omcan.com
| NEMA 5-15 125 VAC/ 15 AMP RECEPTACLE
---|---
| NEMA L26-30R 220VAC / 30 AMP RECEPTACLE
| IEC 60309 3P+N+E 415VAC / 16 AMP RECEPTACLE
STOP
DO NOT RETURN THIS PRODUCT TO THE STORE
For questions or assistance with this product call OSCAN Toll Free: 1 800 485
0234 Customer Service or visit the Support secticm of
www.omorncan.com
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no
damage is evident on the external packaging, open carton to ensure all ordered
items are within the box, and there is no concealed damage to the machine. If
the package has suffered rough handling, bumps or damage (visible or
concealed), please note it on the bill of lading before accepting the delivery
and contact Omcan within 24 hours, so we may initiate a claim with the
carrier. A detailed report on the extent of the damage caused to the machine
must be filled out within three days, from the delivery date shown in the
shipping documents. Omcan has no recourse for damaged products that were
shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all
operation and safety instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost
importance to save these instructions for future reference. Also save the
original box and packaging for shipping the equipment if servicing or
returning of the machine is required.
Safety and Warranty
WARNING
Please use the machine according to these cautions. The user should understand
all safety rules, please carefully read this instruction manual before
operating the machine. Do not remove or change the safety equipment prior to
operating the machine, doing so will void the warranty and cause serious harm
to yourself and others. We are not responsible for any injuries sustained by
incorrect usage of the machine.
CONDITIONS FOR USE
- This machine is used for cutting fresh meat, bone and frozen fish. If you want to cut frozen meat and bones, the correct saw blade must be used.
- This machine should only be used for the purposes mentioned in this manual.
- Service life of saw blade depends on the product it cuts and the pressure used. Usually, the service life standard is between 1000 kgs to 2000 kgs per blade but, if the machine is used on fresh meat only (without the bone), the blades can be used longer.
- Please read the manual entirely and operate the unit according to the information stated within it.
- Do not use the machine if the door is open or if any of the security devices are not functional.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at
1-800-465-0234 to schedule an Omcan
authorized service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical
and part failures not improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can
therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products
separately (differentiated waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specifications
| Model | BS-CN-1651-T | BS-CN-2020 | BS-CN-2400 |
|---|---|---|---|
| Electrical | 110V / 60Hz / 1 | 220V / 60Hz / 3 | |
| Power | 750W | 1500W | 2200W |
| Diameter of Wheel | 8.3” / 211mm | 9.8” / 250mm | 11.8” / 300mm |
| Length of Saw | 65” / 1651mm | 79.5” / 2020mm | 94.5” / 2400mm |
| Material of Saw | High-Carbon Steel | ||
| Line Speed of Saw Blade | 16m/s | 18.8m/s | 22.6m/s |
| Dimensions of Working Table | 17.3” x 18.3” | ||
| 440 x 465mm | 22.2” x 26.3” | ||
| 565 x 668mm | 30.2” x 29.1” |
767 x 738mm
Thickness of Table| 0.1” / 3mm| 0.2” / 4mm
Max Slicing Thickness| 6.3” / 161mm| 8” / 202mm| 9.9” / 252mm
Max Height of Cutting| 9.4” / 238mm| 12” / 304mm| 14” / 355mm
Speed of Motor| 1400r/min
Weight| 89.5 lbs. / 40.6 kgs.| 265.4 lbs. / 120.4 kgs.| 310.9 lbs. / 141
kgs.
Packaging Weight| 126.1 lbs. / 57.2 kgs.| 340.8 lbs. / 154.6 kgs.| 409
lbs. / 185.5 kgs.
Packaging Dimensions| 19.7” x 20.5” x 40.2”
550 x 520 x 1020mm| 26.4” x 29.3” x 63”
670 x 745 x 1600mm| 32.3” x 34.4” x 68.3”
820 x 875 x 1735mm
Item Number| 46785| 46786| 46787
Installation
Place the machine in a stable and flat location. Especially when assembling or disassembling. If the surface is not completely flat,you can adjust the rubber feet to compensate. Please ensure that the power supply is the same as indicated on the rating label and is properly grounded. Please ensure that the power cable is long enough to reach the power source comfortably and that the cable is not damaged. When the machine is opened by the user, please inspect the saw belt length on the top and bottom block, it is must be parallel with the edge of the block. Close the machine’s door and connect to the power source, turn on the green switch, and then the machine is ready for operation. If you turn off the red switch, the machine will shut down.
PLEASE ENSURE THE BELOW AT ALL TIMES:
- The machine should be running correctly (clockwise).
- If the saw blade is loose, please turn the handle on the top until tightened. When properly tightened, the machine will slice correctly and can now be operated safely.
NOTES:
- During installation, please pay attention to direction of the blade, the blade must be facing the correct direction.
- The scraper must be installed properly with the saw blade. If it is improperly installed, it will cause more noise than normal and decrease life of the blade.
- When the door of the machine is opened, the machine will stop operation by itself. Use extreme caution as the blade is sharp.
- Wear safety gloves that are resistant to cuts whenever operating or performing maintenance with this machine.
- Do not us this machine to cut small pieces of meat. Doing so will be hazardous, even with cut resistant gloves.
Operation
When operating, use the push handle located between the bone band and push
button, hold the handle firmly. Carefully use your other hand to steady the
meat, and push the meat towards the blade with the safety device. The machine
will cut through the meat with ease. Do not use your hands to push the meat
through the saw.
When the meat has been cut, pull the handle back and reset the meat carefully.
Repeat as needed until the meat cannot be safely cut.
Never attempt to push the meat through the saw without the safety devices.
Maintenance
REPLACING THE SAW BLADE
To replace the saw blade, please loosen it by turning the tightener counter-
clockwise. Carefully remove the old saw blade and replace it with the new
blade. Please pay attention to the direction of the blade to ensure that it
will cut properly. Ensure that the saw blade and slicer are installed between
the top wheel, bottom pulley, middle plate and pass through guide groove.
Note: There are different blades needed for different types of meat.
Ensure that you are installing the correct blade for your desired purpose.
ADJUSTING THE SAW BLADE
If the blade is not aligned properly, simply loosen the blade and carefully
shift the blade to the correct position. Once adjusted, simply tighten the
blade. Always ensure that the blade can move normally before operating.
CLEANING
Always turn off the unit and unplug from the power source before cleaning the
machine. Open the door of machine, loosen and remove the saw blade. Loose the
scraper protection knob in order to remove the scraper.
Clean with hot water and a stiff brush.
You can also use a hot damp towel to clean the main spare parts, blade and
protective devices. Use a dry cloth to wipe away all residual water.
Special attention should be made in ensuring that the dead angle, wheel, chain
wheel and bottom parts are also carefully cleaned.
Do not use water jets or sprays to clean the machine. Do not immerse any part
of the machine in water. Doing so will cause an electrical hazard.
MAINTENANCE
After every 200 working hours, it is advised to use some food safe machine
lubricant on the guide apparatus of the tightening device. After 5000 working
hours, we suggest to replace the wheel bearings.
Parts Breakdown
Model BS-CN-1651-T 46785
Model BS-CN-1651-T 46785
Item No.| Description| Position| Item No.|
Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
AF326| Cover for Motor for 46785| 1| AF346| Table for 46785| 21| AF366| Bottom
for 46785| 41
AF327| Cap Nut for 46785| 2| AF347| Axis for 46785| 22| AF367| Wire and Cord
for 46785| 42
AF328| Flat Gasket for 46785| 3| AF348| Small Axis for 46785| 23| AF368| Line
Card for 46785| 43
AF329| Rubber Gasket (Jacket) for 46785| 4| AF349| Wheel
for 46785| 24| AF369| Electric Box (Include Contactor) for 46785|
44
AF330| Pole for 46785| 5| AF350| Saw for 46785| 25| AF370| Body for 46785| 45
AF331| Back Cover for 46785| 6| AF351| Bearing for 46785| 26| AF371| Length
Plate for 46785| 47
AF332| Motor for 46785| 7| AF352| O Ring for 46785| 27| AF372| Axis for
Adjusting for 46785| 48
AF333| Guide Plate for 46785| 8| AF353| Gland for 46785| 28| AF373| Supporting
for Scraper for 46785| 49
AF334| Adjusting Slider for 46785| 9| AF354| Door for 46785| 29| AF374| Seat
for Scraper for 46785| 50
AF335| Top Cover for 46785| 10| AF355| Mouthpiece Board for 46785| 30| AF375|
Scraper for 46785| 51
AF336| Locking Nut for 46785| 11| AF356| Shaft Seat for 46785| 31| AF376|
Handle for 46785| 52
AF337| Spring for 46785| 12| AF357| Screw for 46785| 32| AF377| Angle Iron for
46785| 53
AF338| Adjusting Handle for 46785| 13| AF358| New Knob for 46785| 33| AF378|
Turning Axis for 46785| 54
AF339| Steel Ball for 46785| 14| AF359| Case for Roumo for 46785| 34| AF379|
Angle Iron for 46785| 55
AF340| End Cover for 46785| 15| AF360| Supporting Plate for 46785| 35| AF380|
Microswitch for 46785| 56
AF341| Switch for 46785| 16| AF361| Locking Board for Switch for 46785| 36|
AF381| Shaft Collar for 46785| 57
AF342| Shaft Ring for 46785| 17| AF362| Wheel for 46785| 37| AF382| Stand for
Scraper for 46785| 58
AF343| Knob for 46785| 18| AF363| Mouthpiece Board for 46785| 38| AF383|
Scraper for 46785| 59
AF344| Channel Iron for 46785| 19| AF364| Backplane for 46785| 39| | |
AF345| Guide Shaft for 46785| 20| AF365| Leg for 46785| 40| | |
Model BS-CN-2020 46786
Model BS-CN-2400 46787
Model BS-CN-2020 46786
Item No.| Description| Position| Item No.|
Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
AF384| Cover for 46786| 1| AF412| Stand for 46786| 29| AF440| Shaft for 46786|
57
AF385| Nut for 46786| 2| AF413| Cleaner 1 for 46786| 30| AF441| Sliding Plate
of Groove for 46786| 58
AF386| Gasket for 46786| 3| AF414| Cleaner 2 for 46786| 31| AF442| Protection
of Moving for 46786| 59
AF387| Spring for 46786| 4| AF415| Handle for 46786| 32| AF443| Moving Guide
Shaft for 46786| 60
AF388| Adjusting Handle for 46786| 5| AF416| Sliding Working Table for 46786|
33| AF444| Guide Part for 46786| 61
AF389| Sheath for 46786| 6| AF417| Cover for 46786| 34| AF445| Rubber Gasket
for Switch for 46786| 62
AF390| Round Ball for 46786| 7| AF418| Bakelite Handle for 46786| 35| AF446|
Length Board for 46786| 63
AF391| Lid Cover for 46786| 8| AF419| Collar for Top Shaft for 46786| 36|
AF447| Tightening Screw for 46786| 64
AF392| Tightening Shaft for 46786| 9| AF420| Pulley 2 for 46786| 37| AF448|
Bending Board for 46786| 65
AF393| Pin for 46786| 10| AF421| Bottom for 46786| 38| AF449| Support Frame of
Motor for 46786| 66
AF394| Spring for 46786| 11| AF422| Adjusting Feet for 46786| 39| AF450| Waste
Setting (Selected) for 46786| 67
AF395| Bushing for 46786| 12| AF423| Non-Adjusting Feet for 46786| 40| AF451|
Hexagon Screw for 46786| 69
AF396| Box of Switch for 46786| 13| AF424| Seat for 46786| 41| AF452| Big
Gasket for 46786| 70
AF397| Stop Button for 46786| 14| AF425| Body for 46786| 42| AF453| Seat of
Transform for 46786| 71
AF398| Start Button for 46786| 15| AF426| Drawer for Waste for 46786| 43|
AF454| Star Handle for 46786| 72
AF399| Locker for 46786| 16| AF427| Door for 46786| 44| AF455| Hexagon Screw
for 46786| 73
AF400| Handle of Locker for 46786| 17| AF428| Protection for Saw for 46786|
45| AF456| Fixing Stand for 46786| 74
AF401| Retaining Plate for 46786| 18| AF429| Shaft for 46786| 46| AF457| Shaft
for 46786| 75
AF402| Pulley 1 for 46786| 19| AF430| Protection for Saw for 46786| 47| AF458|
Nut for 46786| 76
AF403| Shaft of Pulley for 46786| 20| AF431| Shaft for 46786| 48| AF459|
Gasket for 46786| 77
AF404| Sealing Ring for 46786| 21| AF432| Back Cover for 46786| 49| AF460|
Handle for 46786| 78
AF405| Bearing for 46786| 22| AF433| Motor for 46786| 50| AF461| Moving Shaft
for 46786| 79
AF406| Spacer for 46786| 23| AF434| Microswitch for 46786| 51| AF462| Clamping
Plate 1 for 46786| 80
AF407| Shaft for 46786| 24| AF435| Contacting and Capacitor for 46786| 52|
AF463| Seat with Drawer for 46786| 81
AF408| Collar for Shaft for 46786| 25| AF436| Handle for 46786| 53| AF464|
Drawer for 46786| 82
AF409| O Ring for 46786| 26| AF437| Cover of Back for 46786| 54| AF465| Cover
for Door for 46786| 83
AF410| Gland for 46786| 27| AF438| Guiding Part for 46786| 55| | |
AF411| Saw for 46786| 28| AF439| Sliding Part for 46786| 56| | |
Model BS-CN-2400 46787
Item No.| Description| Position| Item No.|
Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
AF384| Cover for 46787| 1| AF412| Stand for 46787| 29| AF440| Shaft for 46787|
57
AF385| Nut for 46787| 2| AF413| Cleaner 1 for 46787| 30| AF441| Sliding Plate
of Groove for 46787| 58
AF386| Gasket for 46787| 3| AF414| Cleaner 2 for 46787| 31| AF442| Protection
of Moving for 46787| 59
AF387| Spring for 46787| 4| AF415| Handle for 46787| 32| AF443| Moving Guide
Shaft for 46787| 60
AF388| Adjusting Handle for 46787| 5| AF468| Sliding Working Table for 46787|
33| AF444| Guide Part for 46787| 61
AF389| Sheath for 46787| 6| AF469| Cover for 46787| 34| AF445| Rubber Gasket
for Switch for 46787| 62
AF390| Round Ball for 46787| 7| AF418| Bakelite Handle for 46787| 35| AF479|
Length Board for 46787| 63
AF391| Lid Cover for 46787| 8| AF419| Collar for Top Shaft for 46787| 36|
AF447| Tightening Screw for 46787| 64
AF392| Tightening Shaft for 46787| 9| AF470| Pulley 2 for 46787| 37| AF448|
Bending Board for 46787| 65
AF393| Pin for 46787| 10| AF421| Bottom for 46787| 38| AF480| Support Frame of
Motor for 46787| 66
AF394| Spring for 46787| 11| AF422| Adjusting Feet for 46787| 39| AF450| Waste
Setting (Selected) for 46787| 67
AF395| Bushing for 46787| 12| AF423| Non-Adjusting Feet for 46787| 40| AF451|
Hexagon Screw for 46787| 69
AF396| Box of Switch for 46787| 13| AF471| Seat for 46787| 41| AF452| Big
Gasket for 46787| 70
AF397| Stop Button for 46787| 14| AF472| Body for 46787| 42| AF453| Seat of
Transform for 46787| 71
AF398| Start Button for 46787| 15| AF473| Drawer for Waste for 46787| 43|
AF454| Star Handle for 46787| 72
AF399| Locker for 46787| 16| AF474| Door for 46787| 44| AF455| Hexagon Screw
for 46787| 73
AF400| Handle of Locker for 46787| 17| AF428| Protection for Saw for 46787|
45| AF456| Fixing Stand for 46787| 74
AF401| Retaining Plate for 46787| 18| AF429| Shaft for 46787| 46| AF481| Shaft
for 46787| 75
AF402| Pulley 1 for 46787| 19| AF430| Protection for Saw for 46787| 47| AF458|
Nut for 46787| 76
AF403| Shaft of Pulley for 46787| 20| AF431| Shaft for 46787| 48| AF459|
Gasket for 46787| 77
AF404| Sealing Ring for 46787| 21| AF475| Back Cover for 46787| 49| AF460|
Handle for 46787| 78
AF405| Bearing for 46787| 22| AF476| Motor for 46787| 50| AF461| Moving Shaft
for 46787| 79
AF406| Spacer for 46787| 23| AF434| Microswitch for 46787| 51| AF462| Clamping
Plate 1 for 46787| 80
AF466| Shaft for 46787| 24| AF435| Contacting and Capacitor for 46787| 52|
AF482| Seat with Drawer for 46787| 81
AF408| Collar for Shaft for 46787| 25| AF436| Handle for 46787| 53| AF483|
Drawer for 46787| 82
AF409| O Ring for 46787| 26| AF477| Cover of Back for 46787| 54| AF484| Cover
for Door for 46787| 83
AF410| Gland for 46787| 27| AF438| Guiding Part for 46787| 55| | |
AF467| Saw for 46787| 28| AF478| Sliding Part for 46787| 56| | |
Electrical Schematics
Model BS-CN-1651-T 46785
Model BS-CN-2020 46786
Model BS-CN-2400 46787
Notes……….
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting:
https://omcan.com/warranty-registration/
For mailing in Canada
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5| For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
---|---
or email to: service@omcan.com
Since 1951 Omcan has grown to become a leading distributor of equipment and
supplies to the North American food service industry. Our success over these
many years can be attributed to our commitment to strengthen and develop new
and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we
continually work to improve and grow the company. We strive to offer customers
exceptional value through our qualified local sales and service
representatives who provide convenient access to over 6,500 globally sourced
products.
