SCOSCHE BoomBOTTLE MS Waterproof Bluetooth Speaker Owner’s Manual
- June 9, 2024
- Scosche
Table of Contents
SCOSCHE BoomBOTTLE MS Waterproof Bluetooth Speaker
Parts List
- A. boomBOTTLETM MS
1. MagSafeTM-Compatible Magnetic Mount
2. Bottle Opener
3. Control Panel with Integrated Cover
4. MagicMountTM Magnetic Base- B. MagicRingTM
- C. Mounting Template for MagicRingTM
- D. USB-C Cable
- E. Cleaning Wipe
Function
| Function | Multifunction Button (MFB) | Indicator |
|---|---|---|
| Power On | Tap & hold 3 sec. | Audio Tone & LED |
| Power Off | Tap & hold 3 sec. | Audio Tone & LED |
Pairing
(A)
| Speaker will automatically enter pairing mode
3 seconds after powering on.
|
Blinking LED & Audio Tone
Notes:
The speaker will display as “boomBOTTLE MS” in device’s
Bluetooth setting.
The speaker automatically reconnects to the last paired device when powered on.
Reset: Power on the speaker, then tap & hold 3 buttons for 1 sec.
Audio Controls
B| Play/Pause| Tap MFB Once
C| Next Track| Tap MFB Twice
D| Previous Track| Tap MFB 3 Times
E| Volume Up| Tap “+” Once
F| Volume Down| Tap “—” Once
G| Answer/End Call| Tap MFB Once
Pairing
Note:
Powering off one speaker will shut off both.
MagSafe
-
A. iPhone 12 or Later (with optional MagSafe case)
If using a case, it must be a MagSafe case (not included). -
B. iPhone 12 or Later (without case)
Not compatible with MagSafe charging. -
C. Non-MagSafe Devices
Use included template to accurately position MagicRing on the device.
Case required. Manufacturing materials do not allow adhesives to bond directly to the device.
Charging
Press MFB once (A) to check the battery level (B). Open the control panel
cover (C). Charge the boomBOTTLE MS using the included USB-C cable (D) with a
USB-C charger or other USB-C power source (not included).
Specifications
- Music Time: Up to 12 Hours
- Charge Input: 5V 2A
- Range: 33 ft. (10 m)
- Waterproof Rating: IP67
- Max. Operating Temperature: 45°C
- Bluetooth v5.0
Caution
- high or low extreme temperatures that a battery can be subjected to during use, storage, or transportation
- low air pressure at high altitude
- replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types)
- disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion
- leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas
- a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
Mounting
Magnetic Mounting Base
- Place the magnetic base of the boomBOTTLE MS on a flat metal surface (A).
- Note: boomBOTTLE MS may also be attached to a 1/4” threaded camera mount (B).
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Canada Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development
Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
boomBOTTLE MS How-To Video
Scosche Industries
1550 Pacific Avenue Oxnard, California 93033
Phone: 800-363-4490 x1 /
805-486-4450 x1
www.scosche.com.
©2022 Scosche Industries
- Scosche, boomBOTTLE, MagicMount & MagicRing are trademarks of Scosche Industries.
- Other marks or brands are the property of their respective owners.
- Devices and or appearance may vary.
Designed in Oxnard, California.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>