LANCOM LN-1700UE Wireless Access Point User Guide
- June 4, 2024
- LANCOM
Table of Contents
LANCOM LN-1700UE Wireless Access Point
OVERVIEW
-
Power
After connecting the cable to the device, turn the connector 90° clockwise to prevent it from accidental unplugging. Use only the supplied power adapter. -
Ethernet interface
Use the cable with the Ethernet connectors to connect interface ETH1 (PoE) or ETH2 to your PC or a LAN switch. -
Reset button
Pressed up to 5 seconds: device restart Pressed until first flashing up of all LEDs: configuration reset and device restart -
Serial interface
You can optionally configure the device by connecting it to a PC with a configuration cable (separately available). -
USB interface (inner right side)
Connect compatible USB devices either directly to the USB interface, or use a suitable USB cable.
Please observe the following when setting up the device
- For devices to be operated on the desktop, please attach the adhesive rubber footpads
- Do not rest any objects on top of the device
- Keep the ventilation slots on the side of the device clear of obstruction
- Lockable wall and ceiling mounting with the LANCOM Wall Mount (LN) (available as an accessory)
- Please note that when operating both Wi-Fi modules in the same frequency band, mutual interference cannot be ruled out
Power
WLAN link
SPECIFICATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>