PARKSIDE PAP 20 B3 Rechargeable Battery 20V Instruction Manual

: June 4, 2024
: PARKSIDE

Table of Contents

PARKSIDE PAP 20 B3 Rechargeable Battery 20V
Introduction
Intended Use
General Description
Overview
Technical Data
Charging time
Safety information
General Safety Directions
Guarantee
Repair Service
Spare Parts/Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PARKSIDE PAP 20 B3 Rechargeable Battery 20V

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product. During production, this equipment has been checked for quality and subjected to a ﬁ nal inspection. The functionality of your equipment is therefore guaranteed.
The operating instructions consti-tute part of this product. They contain important information on safety, use and disposal. Before using the prod-uct,
familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications speciﬁ ed. Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended Use

The rechargeable battery is compatible with all devices from the PARKSIDE X 20 V TEAM series. The batteries may only be charged using chargers from the PARK- SIDE X 20 V TEAM series. Any other use can damage the device and thus pose a sub-stantial risk to the user. This device is not suita-ble for commercial use. The warranty is void in the case of commercial use.
The manufacturer is not liable for damage caused by improper use or incorrect oper-ation.

General Description

The illustrations can be found on the front fold-out page.

The extent of the delivery

Rechargeable battery
Instruction manual

note: The charger is not included in the delivery.

Dispose of the packag-ing material correctly.

Overview

PARKSIDE PAP 20 B3 Rechargeable Battery 20V fig
1

Release button
Button for the charge status dis-play
Battery charge level indicator
Rechargeable battery

Technical Data

Battery (Li-Ion): P
AP 20 B3
Battery cells: 10
Nominal voltage: 0 V
Capacity: 4.0 A h
Energy; 80 W h
Temperature: max. 5 0 °C
Charging process: 4 – 4 0 °C
Operation -20 – 5 0 °C
Storage: 0 – 4 5 °C

Charging time

| Battery
---|---
PAP 20 B3
Charger| PLG 20 A1

PLG 20 A4

PLG 20 C1

| ****

120 Min

PLG 20 A3

PLG 20 C3

PDSLG 20 A1

| ****

60 Min

This type of rechargeable battery may be charged with the following chargers: PLG 20 A1, PLG 20 A4,

PLG 20 C1,
PLG 20 A3
PLG 20 C3,
PDSLG 20 A1
An up-to-date list of battery compatibility can be found at: www.lidl.de/akku

Safety information

Graphical symbols

Warning symbols with information on damage and injury prevention.
Hazard symbol with informa-tion on the pre-vention of per-sonal injury caused by electric shock.
Help symbols with informa-tion on improving tool handling.

Symbols on the Battery

This rechargeable battery is part of the Parkside X 20 V TEAM series
Read through the instruction manual carefully.
Button for the charge status dis-play
Do not dispose of batteries in household waste, ﬁre or water.
Do not subject the battery to strong sunlight over long periods and do not leave it on a heater (max. 50 °C).
Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner.
Electrical appliances must not be disposed of with the domestic waste.

General Safety Directions

Caution! When using power tools, observe the following basic safety measures for the prevention of electric shocks and the risk of injury and ﬁ re. Please read all these instructions before using this electric tool and please keep the safety instructions.

Careful handling and use of battery devices

Only recharge batteries using chargers be-longing to the PARKSIDE X 20 V TEAM series.
If a charger that has been designed for a particular type of battery is used to charge other batteries, there is a risk of ﬁ re.
In the power tools, use only the batteries designed for the purpose. The use of other batteries may result in injuries and risk of ﬁ re.
Keep the unused battery away from pa-per clips, coins, keys, nails, screws and other small metal objects, which could cause bridging of the contacts. A short circuit between the battery con-tacts may cause burns or ﬁ re.
If used incorrectly, liquid may leak from the battery. Avoid contact with this. In the event of accidental contact, rinse off with water. If the liquid gets into eyes, seek med-ical assistance. Leaking battery ﬂ uid may cause skin irritations or burns.
Do not use damaged or altered batteries. Damaged or altered batteries can be unpredictable and lead to ﬁ re, ex-plosion or risk of injury.
Do not expose batteries to ﬁ re or elevated temperatures. Fire or temperatures over 130 C° can cause an explosion.
Follow all instructions for charging and never charge the battery or the battery-powered tool outside the temperature range stated in the operating instructions. In-correct charging or charging outside the permit-ted temperature range may destroy the battery and increase the risk of ﬁ re.

Service

Never repair damaged batteries. All battery repairs should be car-ried out by the manufacturer or authorized customer service centers only.
Special safety directions for battery-operated tools
Ensure that the device is switched off before inserting the battery. Inserting a battery into a power tool that is switched on may result in accidents.
Recharge the batteries indoors only because the battery charger is designed for indoor use only.
To reduce the electric shock hazard, unplug the battery charger from the mains before cleaning the charger.
Do not subject the battery to strong sunlight over long periods and do not leave it on a heater. Heat damages the battery and there is a risk of explosion.
Allow a hot battery to cool before charging.
Do not open up the battery and avoid mechanical damage to the battery. Risk of short circuits and fumes may be emitted that irritate the respiratory tract. Ensure fresh air and seek medical assistance.
Do not use any accessories that are not recommended by PARKSIDE. This can result in electric shock or ﬁre.

Observe the safety information and notes on charging in the instruction manual for your Parkside X 20 V Team series tool and charger.

Operation Removing/inserting the Battery

Only insert the rechargeable battery once the battery-operat-ed tool is ready for use. Risk of injury!

To remove the battery (4) from the appliance, press the release button (1) on the battery and pull out the battery.
To insert the battery (4), place it on the guide track and push it into the appliance. It will audibly snap in.

Checking the charge status of the rechargeable battery

The battery charge sta-tus indicator (3) signal-ises the state of charge of the battery (4).
Press the button (2) on the battery. The state of charge of the battery is displayed by illumi-nating the 3-colour LED lights of the state of charge display.

3 LEDs light up
(red, orange and green): Battery is fully charged.
2 LEDs light up
(red and orange): Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged

Only charge the battery (4) when the red LED on the charge status indicator (3) is on.

Used batteries

If a fully recharged battery lasts for considerably short-er operating times, the battery is used up and needs to be replaced. Only use an OEM battery pack replacement available from our Customer Service.
Always take heed of the applicable safety instructions as well as the environmental pro-tection regulations and information (see “Cleaning and Maintenance”).

Storage

Remove the battery before storing the unit for longer pe-riods of time (e.g. hibernation).
Store the battery only in a partially charged state. During prolonged storage, 2 to 3 LEDs should be illu-minated.
During a longer storage period, check the state of charge of the bat-tery and recharge if necessary roughly every 3 months.
In order to keep the battery well charged, avoid exposing the appliance to extreme heat or cold in stor-age.
The storage temperature for the battery is between 0 °C and 45 °C. Avoid extreme cold or heat during stor-age to ensure the battery output is not adversely affected.

Cleaning

Clean the battery with a dry cloth or with a paint brush.
Do not use water or metal objects.

Maintenance

The equipment is maintenance-free.

Waste Disposal/Environmental Protection
Remove the battery from the device and recycle the battery and packaging in an environmentally-friendly manner.
Dispose of the packag-ing material properly.

Electric units do not belong with domestic waste.
Do not dispose of batteries in household waste, ﬁ re (risk of ex-plosion) or water. Dam-aged batteries may damage the environ-ment and your health if toxic fumes or liquids leak out.

Defective or used batteries must be recycled in accord-ance with Directive 2006/66/EC.
Return the unit and the recharger to a recycling centre. The plastic and met-al parts employed can be separated out and thus recy-cled use can be implemented. Ask our Service-Center for details.
Dispose of batteries in discharged con-dition. We recommend covering the pole with adhesive tape to prevent a short circuit. Do not open up the bat-tery.
Dispose of batter-ies in accordance with the local regulations. Take batteries to an old battery collection point where they will be recycled in an environmentally friendly manner. For information about this, ask your local waste management company or our service centre.\
Defective units re-turned to us will be disposed of for free.

Guarantee

Dear Customer,
This device comes with a three-year warranty from the date of purchase.
In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee pre-sented below.

Terms of Guarantee
The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.
If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will re-pair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written de-scription of what con-stitutes the defect and when it occurred.
If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Peri-od and Statutory Claims for Defects
The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be re-ported immediately af-ter unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully pro-duced in accordance with strict quality guide-lines and conscien-tiously checked prior to delivery.
The warranty is only valid for material or manufacturing defects. This warranty does not extend to consum-able parts exposed to normal wear and tear (e.g. battery capacity). This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Neither does it extend to dam-age resulting from wa-ter, frost, lightning and ﬁ re or improper transport. Precise adherence to all of the instructions speciﬁ ed in the operat-ing manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided.
The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not un-dertaken by our authorized service branch.

Processing in Case of Guarantee
To ensure efﬁcient handling of your query, please follow the direc-tions below:

Please have the receipt and item number (IAN 373434_2104) ready as proof of purchase for all en-quiries.
Please ﬁ nd the item number on the rat-ing plate.
Should functional errors or other defects occur, please initially contact the service department speciﬁ ed below by telephone or by e-mail. You will then receive further information on the processing of your complaint.
After consultation with our customer service, a product recorded as defec-tive can be sent postage paid to the service address communicated
to you, with the proof of purchase (receipt) and spec-iﬁ cation of what constitutes the de-fect and when it oc-curred. In order to avoid acceptance problems and addi-tional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, ex-press or other spe-cial freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be car-ried out by our service branch, which will be happy to issue a cost estimate for you.
We can handle only equipment that has been sent with ade-quate packaging and postage.
Attention: P lease send your equipment to our service branch in clean condition and with an indication of the defect. Equipment sent car-riage forward or by bulky goods, express or other special freight will not be accepted. We will dispose of your defective devices free of charge when you send them to us.
Service Center
Service Great Britain
Tel.: 0800 404 7657 E-Mail:
grizzly@lidl.co.uk IAN 373434_2104

Spare Parts/Accessories

Spare parts and accessories can be obtained at www.grizzlytools.shop

If you have issues ordering, please use the contact form.
If you have any other questions, contact the ” Service Center”(see page 21).

Battery

PAP 20 B3, 4,0 Ah: 80001157

Charger

PLG 20 A1; 2,4 A; EU: 80001337
PLG 2 0 A 1; 2 ,4 A ; UK : 80001338
PLG 2 0 A 3; 4 ,5 A ; E U : 80001323
PLG 2 0 A 3; 4 ,5 A ; UK: 80001324
PLG 2 0 C1 ; 2 ,4 A , E U: 80001353
PLG 2 0 C1 ; 2 ,4 A , UK: 80001354
PLG 20 C3; 4,5 A, EU: 80001355
PLG 2 0 C3 ; 4 ,5 A , UK: 80001356
PDSLG 20 A1; EU: 80001339
PDSLG 2 0 A 1; UK: 80001340

Translation of the original EC declaration of conformity

We hereby conﬁ rm that the battery PAP 20 B3, Serial number 000001 – 980000 conforms with the following applicable relevant version of the EU guidelines:

*2014/30/EU2011/65/EU & (EU) 2015/863**

In order to guarantee consistency, the following harmonized standards, as well as national standards and stipulations, have been applied:

EN 55014-1:2017/A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019 EN 61000-3-3:2013/A1:2019
EN 62841-1:2015 Appendix K
IEC 62133-2:2017
EN IEC 63000:2018

This declaration of conformity is issued under the sole responsibility of the manufacturer:

The object of the declaration described above satisﬁes the provisions of Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful substances in electrical and electronic appliances.