ADLER AD 6658 Fruit and Vegetable Dryer User Manual
- September 3, 2022
- ADLER
Table of Contents
ADLER AD 6658 Fruit and Vegetable Dryer
GENERAL SAFETY CONDITIONS
IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
- Before using the device, read the operating instructions and follow the instructions contained therein. The manufacturer is not liable for any damage caused by the use of the device contrary to its intended use or improper operation.
- The device is intended for domestic use only. Do not use it for other purposes inconsistent with its intended use.
- The appliance should only be connected to a 220V-240V ~ 50 Hz socket. In order to increase the safety of use, many electric devices should not be connected to one electric circuit simultaneously.
- Be especially careful when using the device when children are in the vicinity. Do not allow children to play with the device and do not let children or people unfamiliar with the device use it.
- WARNING : This equipment may be used by children over 8 years of age and people with reduced physical, sensory or mental abilities, or people with no experience or knowledge of the equipment, if this is done under the supervision of a person responsible for their safety or has been provided to them. instructions on the safe use of the device and are aware of the dangers associated with its use. Children should not play with the equipment. Cleaning and user maintenance should not be performed by children unless they are over 8 years of age and these activities are performed under supervision.
- Always remove the plug from the outlet after use, holding the outlet with your hand. DO NOT pull on the cord.
- Do not immerse the cable, plug, and the entire device in water or any other liquid. Do not expose the device to weather conditions (rain, sun, etc.) or use it in high humidity conditions (bathrooms, damp mobile homes).
- Periodically check the condition of the power cord. If the power cord is damaged, it should be replaced by a specialist repair shop in order to avoid a hazard.
- Do not use the appliance with a damaged power cord, if it has been dropped or damaged in any way, or if it is not working properly. Do not repair the device yourself as it may cause electric shock. Take the damaged device to an appropriate service center for inspection or repair. Any repairs may only be performed by authorized service points. Incorrectly performed repairs can pose a serious threat to the user.
- Place the device on a cool, stable, even, and temperature-resistant surface, away from hot kitchen appliances such as electric cooker, gas burner, etc., and away from flammable materials (curtains, curtains, wallpapers, etc.). For proper air circulation, there must be a free space of at least 10 cm on each side of the device and at least 30 cm above the dryer.
- Do not cover the ventilation openings of the dryer during operation or when the device is not completely cool, as this may cause overheating and damage to the device.
- Do not use the device near flammable materials.
- The power cord must not hang over the edge of the table or touch hot surfaces.
- The device must not be left unattended when plugged into a power socket.
- For additional protection, it is advisable to install a residual current device (RCD) in the electrical circuit with a rated residual current not exceeding 30 mA. A specialist electrician should be consulted in this regard.
- The power cord must not be placed above the dryer, and should not touch or lie near hot surfaces. Do not place the dryer under an electrical socket.
- Do not place cardboard, paper, plastics, and other flammable and fusible products in the dryer.
- After drying is finished or before cleaning the device, disconnect the power plug from the socket and allow it to cool down. It is necessary to wait a sufficiently long period of time as the heated dryer cools down slowly.
- The device must cool down before being stored.
- Clean the device after each use.
- The device should not work for more than 72 hours without breaks.
Food Dehydrator description
- Cover
- Tray
- Body
- Increase key
- Decrease key
- Function key
- On/Off key
- Time light
- Temperature light
- Display
Cleaning:
Before first use. Remove all packing materials. Then clean the body (3) all of
the trays (2) and the cover (1) with clean water and mild
detergent like dish soap and a clean slightly damp cloth.
Repeat this step after each use to remove all of the remaining food parts and
dried-up remains from the trays and body.
Setting up:
After cleaning please stack the trays one onto another. You can increase the
space between the trays by turning the trays 180° clockwise and stacking them
onto each other again. The nobs inside the trays will either stand onto each
other or miss each other depending on if you want the trays to be taller for
use or shorter for storage. After setting up the trays please put the cover
onto the highest tray and set the desired temperature and drying time.
Temperature selection and drying time: Turn on the device by pressing the On/ Off key (7) and press the function selection key (6) you can switch between the functions by pressing the corresponding key. The display (10) will show the current selection and the temperature (9) or time light (8) respectfully will turn on showing which option you are setting. Using the increase (4) and decrease (5) keys to set up the desired values. After the time you have set has run out. The device will turn off.
Technical details: Voltage: 220-240V ~ 50Hz Nominal power: 240 W Maximum
Power: 550 W To protect your environment: please separate carton boxes and
plastic bags and dispose of them in corresponding waste
bins. The used appliances should be delivered to the dedicated collecting
points due to hazardous components, which may affect the environment. Do not
dispose of this appliance in the common waste bin.