nedis ACPA006 3-12V 600mA Universal Adapter User Manual
- June 9, 2024
- nedis
Table of Contents
nedis ACPA006 3-12V 600mA Universal Adapter
Specifications
- Input voltage: 100-230V~ 50Hz (AC)
- Output voltage: 3 / 4.5 / 6 / 7.5 / 9 / 12V (DC)
- Output current: Max. 600mA
- Colour: Black
- Dimensions: 69 x 39 x 31mm
Instructions
- Set the voltage selector to match the required voltage.
- “Never use a device which require more current (mA) then mentioned on the label the adapter.”
- Select the correct output plug.
- Check the polarity of the electronic unit and set the right polarity by fitting the output plug as shown in the drawing below. The arrows on the sockets show which pole is central.
- Plug the adapter into a 230 V AC outlet socket.
Safety precautions
To reduce risk of electric shock, this product should ONLY be opened by an authorized technician when service is required. Disconnect the product from mains and other equipment if a problem should occur. Do not expose the product to water or moisture.
Maintenance
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to incorrect use of this product.
General
Designs and specifications are subject to change without notice. All logos brands and product names are trademarks or registered trademarks of their respective holders and are hereby recognized as such. Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and
electronic products should not be mixed with general household waste. There is
a separate collections system for these products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>