GE Profile PGP9830DR Series 30 Inch Downdraft Gas Cooktop Instruction Manual
- June 9, 2024
- GE Profile
Table of Contents
PGP9830DR Series 30 Inch Downdraft Gas Cooktop
Instruction Manual
DIMENSIONS AND INSTALLATION INFORMATION
WALL INSTALLATION: Wall installations require 25″ countertop depth. When
cabinet is flush against the wall, the fan housing can be rotated to the
horizontal position for direct venting through rear wall. Make a countertop
cutout in the range cabinet according to unit dimensions and installation
type. Duct hole is positioned in back of cabinet for through-the-wall ducting.
*NOTE: A 5″ minimum
spacing to adjacent side wall is required Dimension and installation
information are shown in inches.
PENINSULA OR ISLAND INSTALLATION:
For peninsula/islands a minimum 26″countertop depth is suggested. Blower
should be in vertical position. Island or peninsula cabinets may require
adjustment in cutout depth and/or location within the width dimensions. Duct
hole is positioned in bottom of cabinet for island or peninsula installation.
SLAB INSTALLATION: For peninsula or island installation and rear wall
ducting, 6″ PVC duct or locally approved piping should be used if installing
under a poured concrete slab.
INSTALLATION INFORMATION: Before installing, consult installation
instructions, packed with product, for current dimensional data.
NOTE: These cooktops are approved for indoor use only.
DIMENSIONS AND INSTALLATION INFORMATION
INSTALLING THE DUCTWORK:
Use galvanized or aluminum duct in 6″ round or 3-1/4″ x 10″ size, or
combination of both. PVC duct or locally approved piping should be used if
installing under a poured concrete slab. Local building code must be followed
in specifying type and schedule of all duct used.
NOTE: Ductwork must be vented to outside. Do not vent into a wall,
ceiling, crawlspace, attic or any concealed space. Always use an appropriate
roof or wall cap with damper.
Laundry-type wall caps should never be used. For maximum efficiency use the
shortest and straightest duct run possible, with as few fittings as possible.
For satisfactory performance the duct run should not exceed 100 feet
equivalent length. Refer to the table of equivalent lengths (shown in
installation instructions) for various duct configurations. 
FEATURES AND BENEFITS
Downdraft exhaust – Powerful exhaust system effectively pulls smoke and steam
out of the kitchen
Gas on glass cooktop – Sleek and easy to clean
Sealed cooktop burners – Keep spillover contained on cooktop, making cleaning
quick and easy
11,500 BTU all-purpose burner – Delivers a wide range of heat output for most
cooking needs
Dishwasher-safe grates and knobs – Safe to clean in the dishwasher
Model PGP9830DRBB – Black on black
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops
are guaranteed for an exact fit or GE Appliances will pay up to $100 toward
modifications
Visit geappliances.com for more info
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Documents / Resources
| GE
Profile PGP9830DR Series 30 Inch Downdraft Gas
Cooktop
[pdf] Instruction Manual
PGP9830DR Series 30 Inch Downdraft Gas Cooktop, PGP9830DR, PGP9830DR Series,
PGP9830DR Series 30 Inch Downdraft Gas Cooktop, 30 Inch Downdraft Gas Cooktop,
30 Inch Gas Cooktop, Downdraft Gas Cooktop, Gas Cooktop, Downdraft Cooktop,
Cooktop
---|---