MUSE MD-203 KP Boombox with Radio/CD Player and Microphone Child Pink User Manual

: June 9, 2024
: muse

Table of Contents

Introduction
Parts Description
MAINTENANCE
TECHNICAL SPECIFICATIONS
IMPORTANT SAFETY INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MUSE MD-203 KP Boombox with Radio/CD Player and Microphone Child Pink User Manual

Introduction

Read the instructions carefully before operating the unit.

Parts Description

PORTABLE SING-A-LONG RADIO CD PLAYER

LOCATION AND DESCRIPTION OF CONTROLS

Carrying handle
CD compartment
To turn unit on-off
SOURCE: To select FM, AUX IN or CD mode
VOLUME: control: volume up / down
PROGRAM: button (PROG.)
REPEAT: button (REP.)
Speakers
Play/Pause button
Power ON indicator
LED display
STOP button
Play/ Pause indicator
Program indicator (PROG.)
RANDOM button
Skip button
MIC jack
Repeat indicator (REP.)
Skip button
AUX IN jack
INTRO button
TUNING knob with dial scale
FM selector (FMST. / FM).
FM telescopic antenna
Battery compartment
AC socket ( AC IN).

POWER SUPPLY
This set operates on AC 230V ****50Hz or 6 x 1.5V R14/ UM-2/ “C” size batteries (not provided).

AC OPERATION
Connect the detachable AC cord (included) to the AC socket on the rear of the unit.
Insert the AC power cord into a convenient standard AC wall outlet.

DC OPERATION
Install the batteries in their compartment. Use only the size and type of batteries specified.
Respect the polarity indicated in the compartment. Improper polarity can cause damage to the device.
Do not attempt to recharge the batteries, they can catch fire or explode.
The batteries need to be replaced when: The volume decreases, or sound is distorted during operation.
In order to avoid leakage, remove the batteries when unit will not be used for a long period of time.
CAUTION: Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.

Note:

The AC cord must be unplugged from both the socket on the unit and the power outlet for the unit to run on the batteries.
When the set is connected to the mains, the power source automatically switches to AC.
In a concern of saving energy, when playback has reached to the end or not playing, the unit will automatically turn off after 15 minutes. To reset the unit, press to turn ON the unit again.

TURNING UNIT ON/OFF

Press button to turn on the unit. The ON indicator will light up.
Press button to turn off the unit. The ON indicator will turn off.

SELECTING FUNCTION
When the unit is on, repeatedly press SOURCE button to select desired mode: FM, AUX. CD.

LISTENING TO THE RADIO

Repeatedly press SOURCE button to select FM mode, The ON indicator will light up.
Slide the FM selector to select between FM stereo and FM mono.
Use the TUNING control to tune to your desired radio station.
Adjust the volume level.
To enhance radio reception ability:
FM: Extend the telescopic antenna.

LISTENING TO CD

Repeatedly press SOURCE button to select CD mode, The ON indicator will light up. and display blinks “- -”
Open the CD door. Insert a CD with label facing up and close the CD door. After a few seconds, the total number of tracks will show on display.
Playback starts automatically. The current track number will show on display. The indicator will light up.

PLAY/PAUSE
To temporarily stop playing, press button.
The indicator will flash.
To resume play, press this button again.

STOP
If the button is pressed in the course of playing, the disc will cease to play. (Total number of tracks will show on display).

SKIP AND SEARCH
You can always skip forward or backward to your desired track number by pressing the SKIP ( / ) buttons.
When playing any audio CD, press and hold the SKIP button.
The CD will search at high speed in the forward or backward direction. Normal play will continue when you release the button.

REPEAT
To repeat the track currently playing, press the REP. button once. The repeat indicator will flash.
To repeat all tracks, press the REP. button twice. The REPEAT indicator will light up and stay lit.
To cancel the repeat function, press REP. button again. The repeat indictor will turn off.

RANDOM
Press the RANDOM button once during playback, the current track number will show after the display segments stop rolling. To cancel the random function, press RANDOM button again.

PROGRAM

In stop mode, press PROG. button. “01“ will flash on display.
Press( / ) to select a desired track and press PROG. button to conform. The program indicator will flash in the course of programming.
Repeat above steps to program up to 20 tracks.
Press button to start program playback. The program indicator will light up and stay lit.
To cancel program playback, press button twice. The program indicator will turn off.

Intro playback
During playback, press INTRO button to play the first 10 seconds of each track. Press INTRO again to cancel this function.

If you encounter CD playback problem, either of the following ways may help:

Turn off the unit. Disconnect the AC power cord from AC outlet and reconnect it again.
Clean your CD disc.

CONNECTING AUXILIARY SOURCE

Repeatedly press SOURCE button to select AUX mode. The ON indicator will light up, and display shows “AU”.
Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack on the unit (cable not included).
Start playback from your auxiliary source.
Adjust the volume to desired level.
To stop playback, disconnect your auxiliary source from the AUX IN jack.

SING ALONG FUNCTION
Sing along with the music by plugging the provided microphone into the microphone jack on the unit.
WARNING: Tapping or dropping the microphone can permanently damage your microphone.
Resist the urge to swing the microphone around by the cord.

MAINTENANCE

Cleaning
WARNING: Disconnect the unit from the mains supply before cleaning.

Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
Using solvents, abrasive or alcohol-based products risks damaging the appliance.
If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an authorized engineer.

Notes on disc

Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions.
Do not place more than one disc in the disc compartment.
Do not try to open the disc compartment during playing.
Do not touch the lens. Doing so may cause malfunction.
If there is a scratch, dirt or fingerprints on the disc, it may cause tracking error.
Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.
Don’t store discs in places with high temperatures or high humidity, they can become warped. After playing, store the disc in its case.

Important Note
Before transporting the unit, remove the disc from the disc compartment.

TECHNICAL SPECIFICATIONS

POWER SUPPLY:
AC 230V **50Hz, 14W consumption
DC 9V 6×1.5V, battery type R14/UM-2/“C” size (not provided)
RADIO SECTION:** FM 88-108 MHz

CD PLAYER SECTION:
FREQUENCY RESPONE: 100Hz -20kHz
SIGNAL- TO – NOISE RATIO: 40dB
AUX IN SECTION: 3.5mm AUX jack

Note: Design and specification are subject to change without notice.

IMPORTANT SAFETY INSTRUCTION

| CAUTION: To reduce the risk of electric shock, do not open the device, there is no party inside for the user. Refer all servicing to qualified personnel.
---|---
| The lightning with the arrow symbol in the triangle is a warning sign alerting the user to
“dangerous voltage” inside the unit.
| The exclamation point in the triangle is a warning sign alerting the user of important instructions accompanying the product.

The caution mark is located on bottom of the device.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.
This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT marking is located on the bottom cabinet.

| CLASS 1 LASER PRODUCT
---|---

IMPORTANT

The use of apparatus in moderate climates.
The Marking plate is located at the back of the device.
Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
Ensure that the ventilation openings is not covered with items such as newspapers, tablecloths, curtains, etc.
Do not place naked flame sources, such as lighted candles on the apparatus.
Do not expose this appliance to dripping or splashing water.
Do not place objects filled with liquids, such as glass, vase on the device.
Do not throw batteries into fire! Respect the environment when disposing of used batteries.
Batteries should not be exposed to excessive heat such as sunshine, fire or other similar heat source.
The power plug is used as a disconnect device and must be easily accessible. To be completely disconnected from the power, the plug of the appliance should be disconnected completely.
The socket must not be obstructed and should be easily accessible during intended use.
Under the influence of fast transient and / or electrostatic electric phenomenon, the product may malfunction and the user must perform a power reset of the device
Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.
The normal function of the product may be disturbed by strong Electro-Magnetic Interference.
If so, simply reset the product to resume normal operation by following the instruction manual.
In case the function could not resume, please use the product in other location.

If in the future, you need to get rid of this product, please note that Waste electrical products should not be disposed of with household waste. Recycling facilities exist. Check with your municipality or ask your dealer for advice. (Directive for Waste Electrical and Electronic Equipment)