muse M-38 BT Micro System CD-MP3 with Bluetooth User Manual

: June 9, 2024
: muse

Table of Contents

MICRO SYSTEM CD/MP3 WITH BLUETOOTH
DISC OPERATION
USB OPERATION
RADIO
SPECIFICATION
MORE INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

muse M-38 BT Micro System CD-MP3 with Bluetooth User Manual

FRONT VIEW

BACK VIEW

REMOTE CONTROL

Please read the instruction carefully before operating the unit

MICRO SYSTEM CD/MP3 WITH BLUETOOTH

LOCATION OF CONTROLS

LCD display
Bluetooth indicator
Remote sensor
/ SOURCE button: To turn unit on/ off; To select function mode: FM, CD, USB, AUX IN and Bluetooth.
USB port
: Play/Pause; Stop playback
P.MODE / PROG. / DISPLAY / CLK. button: to adjust the playback mode; to program playback sequences; to display the clock time; to set the date and time
Tuning Control
ALBUM button: to select the desired folder; to adjust the sound effect
volume down; alarm 1
volume up; alarm 2
, buttons: Skip / search
Speaker box
Right speaker jack
FM antenna
Left speaker jack
Phones jack
Aux in jack
AC cord
Speaker cord
SNOOZE button
Disc compartment

REMOTE CONTROL

R1. button: To turn unit on/off
R2. SOURCE button
R3. button: Stop playback
R4. button: Play/Pause
R5. buttons / button: Skip / search
R6. V-, AL1 : volume down; alarm 1
R7: V+, AL2 : volume up; alarm 2
R8. ALBUM -/+ buttons: to select the desired folder
R9. P.MODE/ CLK: to adjust the playback mode; to set the date and time
R10. PROG. button: To program playback sequences.

The remote control operates on 1pc “CR2025” lithium battery (included). To power up the remote control, remove the insulation tab from the back of unit.

REPLACING BATTERY FOR THE REMOTE CONTROL

Push the button toward right.
Pull the battery loader out.
Insert one “CR2025” size battery with the positive side (+) facing up.
Replace the cover.

BLUETOOTH SYSTEM

NOTES:

Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.
If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.
Attention should be drawn to the environmental aspects of battery disposal.
Do not throw batteries in fire!
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type

WARNING
Do not ingest the battery, Chemical Burn Hazard (The remote control supplied with) This product contains a coin/ button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention..

SPEAKER CONNECTION

Plug the RIGHT / LEFT speakers’ cord into the speaker input sockets at the rear of the unit.
SPEAKER CONNECTION

POWER SUPPLY

This set operates on AC 230V 50Hz. Connect the power cord to a convenient AC wall outlet.

SETTING TIME AND DATE

In standby mode, press and hold CLK to enter into date and time setting mode. The year digits flash.
Press / to set the year value. Press CLK to confirm and month digits flash.
Repeat step 2 to consecutively perform the settings for month, date, time format (24 or 12 hour display), hours or minutes.
The correct time is shown on display when finish date and time setting.

NOTE:

In 12H clock format, be sure to observe the AM or PM indicator to set the hour correctly. If the PM indicator is on, the hour display is PM.
The week will be set automatically.

SETTING THE ALARM AND THE ALARM MODE

In standby mode, press and hold for a few seconds, the display blinks.
Press and / or to set the time of wake up.
Press then press or to select the source of wake up FM, MP3 (disc), USB or Buzzer.
Press to confirm, the alarm 1 indicator lights up.

Note:

Same procedure applies for alarm with button.
If you wake up with the radio, select your desired station, then long press button to turn off the radio before the alarm time reaches. For the station selecting, please refer to “RADIO”.
The previous level of listening is stored; the volume of the alarm will be identical. If you wake up with the radio, do not forget to check the volume level.
Make sure you have placed a CD disc in the CD compartment or insert a USB into the USB port when you select the wake up source by CD or USB. If the selected wake up source does not exist, the unit will wake up by buzzer when the alarm time reaches.

Stopping the Alarm

Alarm repetition
Press SNOOZE. The alarm stops and will sound again 9 minutes later.
Alarm stop
Press . The alarm1 will sound again the next day at the same time.
Alarm Cancellation
In standby mode, press to cancel the alarm1 permanently. The alarm1 indicator lights off.
Note: Same procedure applies for Alarm2 with button.

AUDIO CONTROLS

Press button to turn on the unit.
Long press button on unit or short press button on remote control to turn off the unit.
The function (FM/ CD/ USB / AUX IN/ BLUETOOTH) is selected by pressing SOURCE button repeatedly

Note: In a concern of saving energy, when playback has reached to the end or listening volume is set at a very low level and no control is operated on the device for a period of 2 hours, the unit will automatically switch to standby mode.

VOLUME
Press button on unit or V+/- button on remote control to adjust the sound to comfortable level. The volume level will be displayed for a few seconds.

EQ
Press and hold ALBUM button repeatedly to toggle among the different sound effects F (FLAT), C (CLASSIC), R (ROCK), P (POP) and J (JAZZ). The selection will show on display for few seconds

DISC OPERATION

Press button to turn on the unit.
Press SOURCE button to select CD function.
Lift up the CD door.
Place the CD with label side up inside the CD compartment and Close the CD compartment.
The “cd” is displayed a few seconds. Playback starts automatically.

BASIC OPERATION
PLAY/PAUSE
To temporarily stop playing, press button. To resume play, press this button again.

STOP
Long press button on unit or short press button on remote control to cease to play. (Total number of tracks will show on display).

Select a track

Press to skip forward to the next track or repeatedly to skip several tracks.
Press return to the beginning of the track, or press repeatedly to skip backwards several tracks

Fast search backward/forward
Press and hold the button. The disc/ USB will search at high speed in
the forward or backward direction. Normal play will continue when you release the button

Select a folder (mp3 only)

Press ALBUM+ on remote control to select the first track of next folder of your current disc or USB.
Press ALBUM- on remote control to select the first track of previous folder of your current disc or USB.

Note: The MP3 icon lights up during playback for mp3 files.

USB OPERATION

USB PLAYBACK

Press button to turn on the unit.
Connect an USB device to the USB port on unit.
Press SOURCE button to select USB mode. After a few seconds, playback starts automatically.

Notes:

The total number of MP3 files on the USB device should not exceed 999.
The device may not contain more than 99 directories.
The reading time takes about a few seconds or more depending on the amount of MP3 files and folders on USB device.
Do not put anything other than a USB device to the port of this unit. Other objects may damage the USB mechanism.
The USB socket must not be connected to the computer directly, for that may damage the unit.
There are many USB devices in the market. We cannot guarantee to support all different models. Please try another USB device if your device is not supported.

RADIO

Listening to the radio
1. Press button to turn on the unit.
2. Press SOURCE button to select FM Radio mode. “FM” appears on display.
3. Tune to a desired station with tuning knob.
4. Adjust the volume by to the desired level.

Note:

For a better reception in FM, extend the antenna.
If a stereo broadcast is received, “ STEREO ” is displayed

PLAY MODES (CD/MP3 ONLY)

Press the P. MODE button repeatedly to select different kinds of play mode with the following sequence.

For Audio CDs: Repeat one Repeat All Random Normal
For MP3 Files: Repeat one Repeat Album Repeat All Random Normal

Repeat one – To repeat the track currently playing, the repeat indicator “ ”
will display. Repeat All – To repeat all tracks, the repeat indicator “ ” and “ALL” will light up and stay lit. Repeat Album – To repeat all tracks in the entire album/folder, the repeat indicator “ “and “ALBUM” will light up and stay lit. Random – all the tracks will be played in random, the “RAND” indicator will light up. Normal – play the tracks in sequence, repeat indicator and “RAND” indicator will turn off.

Program playback (only CD / MP3 mode)

In stop mode, press PROG. button. The display will show “P 01”.
Press ALBUM button to select desired folder and press / to select a desired track.
Press PROG. button to confirm.
Repeat above steps to program up to 20 tracks for CD and 99 tracks for MP3.
Press to start program playback.
Press and hold button once on unit or press button on remote once to stop the program playback.
To cancel program playback, press and hold button twice on unit or press button twice on remote. “PROG” indicator will turn off.

BLUETOOTH FUNCTION

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.

When the unit is ON, press SOURCE button repeatedly select Bluetooth mode. The display will show “ ”. The Bluetooth indicator will start to blink rapidly.
On the Bluetooth device, enable Bluetooth and select “M-38 BT” from the Device List. (Refer to the user manual of the device to be connected for detailed operations.) If the Bluetooth device prompts for a passcode, use “0000”. Some Bluetooth devices will ask you to accept the connection. Bluetooth indicator stop to blink when pairing is successful

Tip: If you want to connect your Bluetooth speaker to another Bluetooth audio device, you need to disconnect current device first and make a new connection. If the pairing fails, perform the following: Press DISPLAY button until the Bluetooth indicator blinks quickly to enter the Pairing mode. On the Bluetooth device, enable Bluetooth and select “M 38 BT” from the Device List (see step 2 above).

On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose “Use as Audio Device (stereo)” or similar.
Pairing remains intact when the unit and/or your Bluetooth device is taken out of communication range. An active connection will be re-established when your Bluetooth device returns within range.
When the unit is turned on again, it will automatically try to reconnect with the most recently paired Bluetooth device.

Using a Bluetooth Device

With a unit paired (see previous section), operate your Bluetooth device and its sound will be heard through the M-38 BT’s speakers.
Press the button to pause playback. Press again to resume playback.
Select desired track with / .
Adjust the volume using the / volume buttons. You can also adjust the volume on the device to which you are paired.

Hereby, NEW ONE S.A.S, declares that this MUSE M-38 BT is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at / conformity/M-38BT.pdf.

CONNECTING AUXILIARY SOURCE

Connect your auxiliary source (e .g. mp3 player) to the Aux in jack. (Cable not included).
Press SOURCE repeatedly to select Aux in mode. The display will show “AU”.
Start playback from your auxiliary source.
Adjust the volume to desired level.
To stop playback, disconnect your auxiliary source from the Aux in jack.

USING HEADPHONES / EARPHONES

Maximum output voltage ≤150mV.
Wide Band Characteristic Voltage ≥ 75mV
HEADPHONE VOLUME WARNING
Connect earphones with the volume set low and increase it if required. Prolonged listening through some earphones at high volume settings can result in hearing damage. When headphones / earphones are connected, no sound will be emitted from the unit’s speaker. Caution: Avoid listening to sound at levels which may be harmful to your ears.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

MAINTENANCE

Cleaning
WARNING: Disconnect the unit from the mains supply before cleaning.

Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
Using solvents, abrasive or alcohol-based products risks damaging the appliance.
If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an authorized engineer.

Notes on disc

Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions.
Do not place more than one disc in the disc compartment.
Do not try to open the disc compartment during playing.
Do not touch the lens. Doing so may cause malfunction.
If there is a scratch, dirt or fingerprints on the disc, it may cause tracking error. Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. Don’t store discs in places with high temperatures or high humidity, they can become warped. After playing, store the disc in its case.
CD-Rs or CD-RWs playback capability at this player may vary depending on quality of media, CD-Burner, speed of burning and application software.

Important Note

Before transporting the unit, remove the disc from the disc compartment.

SPECIFICATION

Power supply: AC 230V 50Hz Power consumption: 10W Speaker: 4 ohms

FM: 87.5-108MHz Bluetooth: 2.402-2.48GHz RF Output Power: 4dBm

MORE INFORMATION

CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). There are no user serviceable parts inside the unit. Refer all servicing to qualify personnel.

The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit.

The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam. This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT marking is located on the back cabinet.

IMPORTANT

The use of apparatus in moderate climates.
The Marking plate is located at the back of the device.
Make sure to have a minimum distance of 5cm around the unit for sufficient ventilation.
Ensure that the ventilation openings are not covered with items such as newspapers, tablecloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Do not expose this appliance to dripping or splashing water.
Do not place objects filled with liquids, such as glass, vases on the device.
Do not throw batteries into fire! Respect the environment when disposing of used batteries.
Batteries should not be exposed to excessive heat such as sunshine, fire or other similar heat source.
The power plug is used as a disconnect device and must be easily accessible. To be completely disconnected from the power, the plug of the appliance should be disconnected completely. The socket must not be obstructed and should be easily accessible during intended use.
Under the influence of fast transient and / or electrostatic electric phenomenon, the product may malfunction and the user must perform a power reset of the device

If in the future, you need to get rid of this product, please note that Waste
electrical products should not be disposed of with household waste.
Recycling facilities exist. Check with your municipality or ask your dealer for advice. (Directive for Waste Electrical and Electronic Equipment)

Note: Design and specification are subject to change without notice.

NEW ONE S.A.S
10, Rue de la Mission, 25480 Ecole Valentin, France