SILVERCREST SWC 1000 D1 Multi-Function Hot Air Styler Instruction Manual

SILVERCREST SWC 1000 D1 Multi-Function Hot Air Styler

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

Introduction

Congratulations on the purchase of your new appliance. You have clearly decided in favour of a high-quality product. These operating instructions are a part of this product. They contain important information in regard to safety, use and disposal. Before using the product, familiarise yourself with all of these operating and safety instructions. Use this appliance only as described and only for the specified areas of application. In addition, pass these operating instructions on to whoever might acquire the appliance at a future date.

Copyright
This documentation is copyright protected. Any copying or reproduction of it, including as extracts, as well as the reproduction of images, also in an altered state, is only permitted with the written authorization of the manufacturer.
Limited liability
All technical information, data and information for the connection and operation contained in these operating instructions correspond to the latest at time of printing and, to the best of our knowledge, take into account our previous experience and know-how. No claims can be derived from the details, illustrations and descriptions in these instructions. The manufacturer assumes no responsibility for damage caused by failure to observe these instructions, improper use, incompetent repairs, making unauthorised modifications or for using unapproved replacement parts.

Intended use

This appliance is intended for human hair care and only for use in domestic households. It is not intended for use on animals or in commercial or industrial environments. This appliance is not intended for any other use or for uses beyond those mentioned. Claims of any kind for damage resulting from unintended use will not be excepted. The operator alone bears liability.

Items supplied

This appliance is supplied with the following components as standard:

• Multi-function hot air styler
• Storage case
• Small round brush
• Large round brush
• Half round brush
• Curling tongs
• Double brush
• Styling jet
• Operating instructions

NOTICE

• Check the contents to ensure that everything is present and for signs of visible damage.
• If the contents are not complete or are damaged due to defective packaging or through transportation contact the Service Hotline (see chapter Service).

Unpacking

• Remove all parts of the appliance and the operating instructions from the carton.
• Remove all packing material.

WARNING! RISK OF SUFFOCATION!

• Packaging materials should not be used as a play thing. There is a risk of suffocation.

Disposal of the packaging
The packaging protects the appliance against transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. The recirculation of packaging into the material circuit saves raw material and reduces the amount of waste generated. Dispose of packaging material that is no longer needed as per the regionally established regulations. Dispose of the packaging in an environmentally friendly manner. Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.

NOTICE

• If possible, preserve the appliance’s original packaging during the warranty period, so that in the event of a warranty claim you can package the appliance ideally for its return.

Appliance description

Figure A:

1. Attachment insertion slot

2. Slide switch Cool Shot

3. Level switch

4. Power cable

5. Suspension loop

6. Air intake grill

7. Release button “push”
   Figure B:

8. Half-round brush

9. Curling tongs

10. Small round brush

11. Large round brush

12. Double brush

13. Styling jet

14. Storage bag

Technical data

Safety instructions

RISK OF ELECTRIC SHOCK

• This appliance must only be connected to a properly installed wall power socket providing electrical energy at the level detailed on the rating plate.
• Under no circumstances may the appliance be submersed in fluids or fluids be allowed to permeate the housing. The appliance must not be exposed to moisture or used outdoors. Should liquids enter the housing, disconnect the appliance from the mains power socket immediately and arrange for it to be repaired by a qualified technician.
• In event of operating malfunctions and before cleaning the appliance, remove the plug from the mains power socket.
• Disconnect the appliance by pulling on the plug itself, not on the power cable.
• Do not wrap the power cable around the appliance, and protect the cable from being damaged.
• To avoid potential risks, if the appliance power cable is damaged, it must be replaced by the manufacturer, its customer service or by a qualified technician.
• Do not kink or crush the power cable, and route it in such a way as to prevent people from stepping on or tripping over it.
• Do not use extension cables.
• Never hold the appliance, the power cable or the power plug with wet hands.
• Unplug the appliance immediately after use. The appliance is completely free of electrical power ONLY when unplugged.
• You must not open the device housing or attempt to repair the device yourself. Should you do so, the safety of the appliance is no longer assured and the warranty will become void. Only allow authorised technicians to repair a defective appliance.
• Ensure that the power cable 4 does not become wet or moist during use. Route the cable in such a way that it cannot be crushed or damaged.
• Ensure that objects can never penetrate into the inside of the appliance, particularly not metal hair clips, grips or hairpins.

Never use the appliance near water, particularly not near sinks, bathtubs or similar vessels. The proximity of water presents a risk, even when the appliance is switched off. Always disconnect the plug from the mains power socket after use. As additional protection, the installation of a residual current circuit-breaker with an activation power rating of not more than 30 mA is recommended for the power circuit in the bathroom. Ask your electrician for advice.

WARNING! RISK OF INJURY!

• This appliance may be used by children of the age of 8 years or over and by persons with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge if they are supervised or, in regard to the safe use of the appliance, have been instructed in its use and have understood the potential risks.
• Children must not play with the appliance.
• Cleaning and user maintenance tasks shall not be carried out by children unless they are supervised.
• Never put the appliance down when it is switched on, and never leave a switched-on appliance unsupervised.
• Never place the appliance close to sources of heat, and protect the power cable against potential damage.
• Do not operate the appliance if it has sustained a fall or is damaged in any way. Have the appliance checked and/or repaired by qualified technicians.
• Do not cover the air intake grille 6 while operating the appliance. Clean the grille at regular intervals.
• The appliance and its accessories can become hot when in use. Therefore, only touch the handle and the buttons.
• Always use the appliance with the attachments fitted, never on its own, since the attachment insertion slot 1 becomes hot during operation.
• Allow the appliance to cool down before attaching or detaching attachments.
• Use only the supplied original accessories, since these have been optimised for interaction with the appliance. Other parts may not be adequately safe.
• Keep the air inlet and outlet openings clear so as to have unimpaired air flow. Otherwise the appliance may overheat.
• Exercise caution when using hair spray, water atomizers etc. The air flow may blow these substances directly into your eyes. On the other hand, these substances must not be allowed to penetrate the appliance, since they may be inflammable, aggressive or electrically conductive.

NOTE

• No user action is required to switch the product between 50 and 60 Hz. The product adapts automatically to either 50 or 60 Hz.

First use

• Before taking the appliance into use ensure that …
  • the appliance and its accessory parts are in perfect working condition,
  • all packaging materials have been removed.
• Clean all of the attachments as described under “Cleaning and care”.

Tips for the perfect hairstyle

• Only style your hair when it is already almost dry.
• Divide your hair into individual strands for more volume.
• You will achieve additional volume by starting to dry your hair at the hairline and working down towards the ends.
• After switching the appliance off, wait for a few seconds before releasing the curl.
• Let your hair cool down sufficiently before combing it out.
• Fix the hair with a little hairspray

Attachment fitting/removal
WARNING! RISK OF INJURY!

• After operation, the appliance components may be hot!

Fitting Attachments

• Insert the desired attachment into the attachment insertion slot 1, so that the front arrow symbol on the attachment points at the arrow symbol on the attachment insertion slot 1 .
• Turn the attachment clockwise until it clicks into place. The back arrow on the attachment now points at the arrow on the attachment insertion slot 1 .

Removing attachments

• First switch the appliance off and allow it to cool down.
• Press the release button “push” 7 and turn the attachment anti-clockwise .
• The attachment can now be removed by pulling it out of the attachment insertion slot 1.

Switching on/off / Selecting a heat level

• When you have inserted the required attachment and connected the plug with the mains power socket, you can now switch the appliance on with the level switch 3 and select the output level:
  • “0“ The appliance is switched off
  • “1“ for a reduced air-flow strength with heat
  • “2“ for a high air-flow strength with heat
• You switch the appliance off by sliding the level switch 3 to the position “0” (= appliance off).
• To fix the styling, you can use the slide switch Cool Shot 2. The styling will be fixed by the cool air stream:
  • During operation, slide the slide switch Cool Shot 2 upwards. The air flow will be cooler.
  • When you want to deactivate the cool air stream, slide the slide switch Cool Shot 2 downwards.

Using the attachments

Large round brush 11
This attachment gives the hair more volume or large curls.

• Wind a slightly damp strand of hair around the large round brush 11.
• Switch the appliance on at level 1 or 2.
• When the strand is dry, slide the slide switch Cool Shot 2 upwards. Wait until the strand has cooled.
• Unwind the large round brush 11 from the strand.
• Proceed with the other strands in the same way

Small round brush 10
With this attachment, you can put curls or waves into your hair.

• Wind a slightly damp strand of hair around the small round brush 10.
• Switch the appliance on at level 1 or 2.
• When the strand is dry, slide the slide switch Cool Shot 2 upwards. Wait until the strand has cooled.
• Unwind the small round brush 0 from the strand.
• Proceed with the other strands in the same way

Curling tongs 9
With this attachment you can put small spiral curls (angel curls) into your hair.

• Secure the tip of the strand with the clip on the curling tongs 9.
• Then wind the slightly damp strand of hair around the curling tongs 9.
• Switch the appliance on at level 1 or 2.
• When the strand is dry, slide the slide switch Cool Shot 2 upwards. Wait until the strand has cooled.
• Open the clip of the curling tongs 9 a little and pull the curling tongs 9 out of the strand.
• Proceed with the other strands in the same way.

Double brush 12
This attachment is suitable for drying particularly long hair.

• Take up a lock of hair near the root using the open double brush 12, close the double brush 12, and keep it closed.
• Switch the appliance on at level 1 or 2.
• Pull the hair slowly through the double brush w so that the lock is dried all the way to the ends.
• Proceed with the other strands in the same way.

Half-round brush 8
The half-round brush 8 is suitable for combing and simultaneous blow drying of the hair.
Styling jet 13
With this attachment, you can target parts of your hair for styling and blow- drying.

Cleaning and Care

RISK OF ELECTRIC SHOCK

• Before cleaning the appliance, always disconnect the power cable from the mains power socket. There is a risk of receiving an electric shock!

WARNING! RISK OF INJURY!

• Allow the appliance to cool sufficiently before cleaning it. Risk of Burns!

CAUTION – PROPERTY DAMAGE!

• Do not use any aggressive, abrasive or chemical cleaning agents! These could damage the upper surfaces of the appliance.
• Clean the appliance only with a lightly moistened cloth.
• Allow the appliance to dry completely before re-use or before storing it.
• If necessary, wipe the storage bag r or the attachments 8/9/0/10/11/12 with a damp cloth.
• Clean the air intake grill 6 at regular intervals with a soft brush.

Storage

• You can also hang the appliance up by the suspension loop 5.
• If you are intending to not use the appliance for an extended period, store it in the storage bag 14. The appliance must be cooled down for this!

Disposal of the appliance
Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2012/19/EU-WEEE (Waste Electrical and Electronic Equipment). Dispose of the appliance through an approved disposal centre or at your community waste facility. Pay heed to the currently applicable regulations. In case of doubt, please contact your waste disposal centre. Your local community or municipal authorities can provide information on how to dispose of the worn-out product. The product is recyclable, subject to extended producer responsibility and is collected separately.

Troubleshooting

The appliance does not function.

| • The plug is not inserted into a power socket.| • Insert the plug into a mains power socket.
• The appliance is not switched on.| • Switch on the appliance.
• The appliance is defective.| • In this case, contact Customer Services.

The appliance does not get hot.

| • The slide switch Cool Shot 2 is in the upwards position.| • Slide the slide switch Cool Shot 2 down- wards.
• The appliance is defective.| • In this case, contact Customer Services.

Kompernass Handels GmbH warranty

Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase. If any material or manufacturing fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the three-year warranty period, along with a brief written description of the fault and of when it occurred. If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery. The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or to fragile parts which could be considered as consumable parts such as switches, batteries or parts made of glass. The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided. This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications/repairs which have not been carried out by one of our authorised Service centers.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:

• Please have the till receipt and the item number (IAN) 373669_2104 available as proof of purchase.
• You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left) or on the sticker on the rear or bottom of the product.
• If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
• You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com. This QR code will take you directly to the Lidl service page (www.lidl-service.com) where you can open your operating instructions by entering the item number (IAN) 373669_2104.

Service

Service Great Britain
Tel.: 0800 404 7657
E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR / Min., (peak))
(0,06 EUR / Min., (off-peak))
E-Mail: kompernass@lidl.ie
IAN 373669_2104

Importer
Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

References

• alto.La
• Kompernaß - Online shop for accessories and spare parts
• de/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>