DIGITUS DN-10050-1 Network USB Adapter Installation Guide

June 9, 2024
DIGITUS

DIGITUS-LOGO

DIGITUS DN-10050-1 Network USB Adapter

DIGITUS-DN-10050-1-Network-USB-Adapter-PRODUCT

Product Introduction

DN-10050-1 is an USB 2.0 to Fast Ethernet Adapter that provides computer system with Ethernet link speed up to 100Mbps. It is backward compatible with USB 1.x. This compact and portable adapter is ideal as a desktop network adapter or laptop accessory.

Features

  1. Compliant with the Standard Specification of USB 1.1 and 2.0
  2. Integrates 10/100Mbps Fast Ethernet MAC/PHY
  3. IEEE 802.3 10BASE-T/100BASE-TX compatible
  4. Support full Duplex Operation 10/100Mbps modes
  5. Support USB Full and High Speed modes with bus power capacity
  6. Supports Suspend mode and Remote Wakeup via Link-up
  7. Upstream port: USB type A
  8. Downstream port: RJ45
  9. Support Windows® 7/8/10/11(32/64 bit); MacOS 10.4 or later

System Requirements

  1. Windows® 7/8/10/11 (32/64 bit), MacOS 10.4 or later
  2. An USB port

Package Contents

  • 1 x USB 2.0 to Fast Ethernet Adapter
  • 1 x User Manual

Hardware Installation

  1. Plug DN-10050-1 directly into an available USB port on your computer.
  2. Connect the network cable into the RJ45 port of DN-10050-1
  3. Connect the other end of the network cable into an available Ethernet port on your router, switch, or any other network device.

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.

www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals