CONRAD LIV60THC500FK Varifocal Bullet Camera User Manual
- June 9, 2024
- CONRAD
Table of Contents
CONRAD LIV60THC500FK Varifocal Bullet Camera
Thank you for using our product.
Before providing power for the camera, please read this manual carefully
before use.
We adopt the latest technical of sensor and driver.
It owns the characters of high definition and stability, strong anti-jamming,
rich and real color. Fixing and using this model are convenient too. It is
very good for you to apply to your CCTV system.
Specification
Model
|
LIV60THC500FK
---|---
Image Sensor
|
1/2.5″ 5MP CMOS sensor
Resolution
|
5MP
Signal System
|
PAL / NTSC
Minimum Illumination
|
0.001Lux/F1.2
S/N Ratio
|
More than 50dB
Synchronous System
|
Internal
IR Distance
|
40 Meters
IR Power On
|
Photodiode AUTO Control
Video Output
| CVBS / CVI / TVI / AHD
Power
|
DC12V(+/-10%) <12W
Lens
|
2.8-12mm Manual Zoom Lens
Weather Proof
|
IP66
Dimension (mm)
|
220(W) x 80(H) x 80(D)
Weight (g)
|
1400
Operating Conditions
|
-10~+50℃ RH95% MAX
Accessories list
| Name | Number |
|---|---|
| Camera | 1 |
| User Guide | 1 |
Notes:
Do not attempt to disassemble the camera. If the camera can not work, please
contact local franchiser or our company.
Main Features
-
Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera Can get high definition picture in low Lux condition. -
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color camera’s AES speed can reach 1/100,000s. -
Gama Characteristic
Camera Gama characteristic is 0.45. -
Scanning Mode
NTSC or PAL mode.
Note:
- Power supply must pass safety certification ,Its output voltage, current, voltage polarity and operating temper- ature must match requirement of this equipment.
- Please install lightning protection devices or cut off the power in thunder and lightning conditions.
- To capture high-quality video and pictures, please make sure the network connection is stable and smooth.
Device connection
Safety instruction
- Before using the camera ,please read this manual carefully and keep it safely for later use.
- Installation should be proceed by professional service and follow manufacturer’s instructions, do not dismantle without authoriza tion.
- In order to prevent sensor ,do not expose lens to intense light source in long time.
- Do not touch sensor directly. Please covers the dustproof cover when the camera is not being used.
- Please use a dry soft cloth to clean the camera. If dirt difficult to clean, use detergent with water and wipe dry the camera.
- Do not install camera under air conditioning’s air gate ,or else lens blur with condensation of moisture.
- Please ensure that all electric power sources are turned off when not open , installation ,clean, etc operation.
- Please transporting , using and storing the camera in allowable temperature and humidity.
- If the camera was broken, for example power cord or plug dam-aged,Splash liquid or foreign matter fall into camera, raining, wetting, etc can’t work situation, please
- contact manufacturer or maintenance center (modify and maintenance without perm ission, you must be responsible for the problems).
Common Problems and Troubleshooting
-
No Picture after providing power
May be the power supply voltage abnormity, please check he power supply voltage and pole whether exactitude. Please check all the connecting cable and monitors whether be connected correctly or not. -
The picture level direction have flowing interference ripples
May be caused by the power supply AC ripples, it need filter the wave of the power supply.
Check the monitor and peripheral equipments used. -
The picture background color changes continuously
The fluorescent lamp’s electromagnetic field cause color roll. This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the distance between the camera and the fluorescent lamps can improve it.
Use power supply external sync. camera can solve it. -
The picture smear too mass
The power supply’s voltage unstable.
Connecting cables not connect correctly or have high impedance.
Note:
- Please note the camera’s operating temperature and its using environment requirement. Avoid using the camera at too high or too low temperatures. The operating tem perature is -30~+60℃. (Recommendatory operating tem perature is -10~+50℃.)
- Do not mount the camera near by the radiator or heater.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>