MeTra MPS-POLCAM-F Vehicles with the Ride Command Systems Instruction Manual
- June 12, 2024
- Metra
Table of Contents
MPS-POLCAM-F Vehicles with the Ride Command Systems
Instruction Manual
MPS-POLCAM-F
INSTALLATION INSTRUCTIONS
#MetraPowerSports
MPS-POLCAM-F Vehicles with the Ride Command Systems
INSTALLING MPS-POLCAM-F
Vehicles with the Ride Command Systems are pre-wired for a front camera. MPS-
POLCAM-F plugs directly into the factory connector.
Step 1: Remove the front grille of your UTV.
Step 2: Locate the 4 pin connector in the center of the grille opening. Remove
protective cap.
Step 3: Plug the 4 pin female connector into the OE plug.
Step 4: Mount the eyeball camera into the OE location.
Step 5: Plug the 4 pin DIN cables into each other and reassemble.
Adjustable Camera
Plugs into OE connector behind grille
TEST YOUR NEW CAMERA!!
©COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Rev Date 7/15/2020
Documents / Resources
|
MeTra MPS-POLCAM-F Vehicles with the Ride Command
Systems
[pdf] Instruction Manual
MPS-POLCAM-F Vehicles with the Ride Command Systems, MPS-POLCAM-F, Vehicles
with the Ride Command Systems, Ride Command Systems, Command Systems
---|---