Pablo Sky LED Multi Light Pendant Light Installation Guide
- June 13, 2024
- Pablo
Table of Contents
SKY
PENDANT SERIES
**120/240V ASSEMBLY & INSTALLATION INSTRUCTIONS
INFO@PABLODESIGNS.COM
888 MARIN STREET
SAN FRANCISCO, CA 94124
PABLODESIGNS.COM**
CORD PATH DIAGRAM
-
a SECURE DRIVER TO BRACKET WITH PROVIDED TAPE. b SECURE BRACKET TO JUNCTION BOX OR CEILING.
-
a WEAVE CORD THROUGH POST (ENTER THREADED SIDE) b THREAD POST ONTO LIGHT ENGINE.
ATTENTION! SKIP TO STEP 5 FOR SKY SOLO -
SECURE SHADE CLAMP TO SHADE (SEE DETAIL VIEW FOR PROPER ASSEMBLY).
-
SLIDE SHADE ASSEMBLY ONTO POST AND SECURE WITH PROVIDED ALLEN KEY. REFERENCE SHADE HEIGHT OFFSET TABLE FOR RECOMMENDED SHADE PLACEMENT. (ATTENTION! BE SURE SET SCREW DOES NOT OBSTRUCT POST PATH THROUGH CLAMP ASSEMBLY)
IMPORTANT! BE SURE TO REFERENCE CORD PATH DIAGRAM BEFORE MOVING ON. -
BE SURE TO WEAVE CORD THROUGH ALL NECESSARY PARTS LISTED ABOVE BASED ON LAMP MODEL.
a BEND WIRE ENDS BEFORE PASSING THROUGH STRAIN RELIEF. b PASS CORD THROUGH STRAIN RELIEF AND SET LAMP HEIGHT BY FASTENING BOTH (TOP AND SIDE) SET SCREWS. (IF NECESSARY : TRIM EXCESS CORD) -
PLACE FASTENED STRAIN RELIEF ONTO MOUNTING BRACKET WITH LOCK WASHER PLACED BETWEEN BRACKET AND STRAIN RELIEF. (ATTENTION! STRAIN RELIEF NESTS INTO RECESS IN BRACKET)
-
WIRE DRIVER TO BUILDING (US : BLACK TO BLACK/WHITE TO WHITE) (EU : BLACK TO BROWN/WHITE TO BLUE)
NOTE: PURPLE AND GREY WIRES ARE USED ONLY IN 0-10V INSTALLATIONS. -
WIRE DRIVER TO LAMP (RED TO RED/BLUE TO BLACK)
-
SECURE CANOPY COVER TO BRACKET ASSEMBLY WITH CANOPY NUT. TIGHTEN UNTIL FIRMLY IN PLACE.
INFO@PABLODESIGNS.COM
INFO@PABLODESIGNS.EU
888 MARIN ST
SAN FRANCISCO, CA 94124
PABLODESIGNS.COM
PABLODESIGNS.EU
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>