little tikes 657788M8 3 in 1 Garden to Table Market Instruction Manual
- June 9, 2024
- Little Tikes
Table of Contents
little tikes 657788M8 3 in 1 Garden to Table Market
ASSEMBLY INSTRUCTIONS
Adult assembly required. Approx. assembly time: 25 min. Thank you for choosing the Little Tikes© 3-in-1 Garden to Table Market. We strive to provide a durable, easy-to-assemble toy that’s made to last, giving your child years of imaginative, engaging fun!
Really important information you should know!
- Read through all the instructions first.
- Clear a flat surface to lay out all the materials so everything is close at hand.
- You will need a Phillips head screwdriver (not included) to assemble the 3-in-1 Garden to Table Market.
- When installing screws, be sure screws are tightened snugly, but do NOT OVERTIGHTEN.
- Be sure to locate your decals and set aside. Some decals are easier to apply when the part is laying flat, so you may want to apply the decals before assembly.
- The parts are listed below – each part is identified with a letter in RED for easy reference.
- Illustrations are for reference only. Styles may vary from actual contents.
- If you have any questions, we’re here to help. Give our customer service team a call at 1-800- 321-0183.
WARNINGS!
- Adult Assembly Required
- Keep these instructions as it contains important information.
- Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp edges and sharp points. Keep away from children until assembled.
- This product is intended for indoor/outdoor family use only.
- This product is intended for use by children ages 2 years and up.
- Do not allow children to sit, stand, play or climb on the top surface. Failure to do so may cause the product to become unstable.
- Protect your eyes. Always wear safety glasses when using power tools.
- Thoroughly wash accessories before contact with food or beverage.
- To better clean the product use a cloth with mild soap and water or skin, hand or face wipes.
Battery Safety Information. This is serious !
- Keep these instructions for future reference.
- Requires 2 “AA” (LR06) alkaline batteries (not included). (Rechargeable batteries may be substituted.)
- The voltage of a fully-charged, rechargeable battery is often lower than that of a fresh alkaline battery. Therefore, it is recommended that alkaline batteries be used instead of rechargeable batteries for best performance and longer play time.
- Install batteries with the correct polarity (+ and -).
- To avoid battery leakage:
- Follow the toy and battery manufacturer’s installation instructions.
- Do not mix old and new batteries.
- Do not mix standard (carbon-zinc), alkaline or rechargeable batteries. Do not mix different brands of batteries. Only batteries of the same or equivalent type as recommended are to be used.
- When toy is not used for an extended period of time, remove batteries to prevent possible leakage and damage to the unit.
- Remove dead or exhausted batteries from product.
- Dispose of dead batteries properly; do not bury. Do not dispose of batteries in fire as they may leak or explode.
- Make sure cover is properly installed on unit at all times.
- Do not attempt to recharge non-rechargeable batteries.
- Rechargeable batteries are to be removed from the toy before recharging.
- Charging of rechargeable batteries should be done an adult.
- The supply terminals are not to be short circuited.
NOTE: If the unit stops working or doesn’t work as it should, remove the batteries for a few minutes and then re-insert them. If there is still a problem, install new batteries.
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Modifications not authorized by the manufacturer may void users authority to operate this device.This Class B digital apparatus complies with Canadian ICES-003.
‘Let’s care for the environment!’ The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item. Do not treat old batteries as household waste. Take them to a designated recycling facility.
© The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of Little Tikes. Please keep this address and packaging for reference since it contains important information. Contents, including specifications and colors, may vary from photos depicted on package. Instructions included. Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
CONSUMER SERVICE:
United States: www.littletikes.com
1-800-321-0183 Monday – Friday The
Little Tikes Company 2180 Barlow Road Hudson, OH 44236
- E-mail: service@littletikescare.com Printed in U.S.A. D.R.©2020 The Little Tikes Company
- United Kingdom:www.littletikes.co.uk Little Tikes, MGA Entertainment (UK) Ltd 50 Presley Way Crownhill Milton Keynes MK8 0ES Bucks, UK
- Tel: +0 800 521 558
- E-mail: support@LittleTikesStore.co.uk
Australia www.littletikes.com.au Imported by MGA Entertainment Australia Pty Ltd Suite 2.02, 32 Delhi Road Macquarie Park NSW 2113 1 300 059 676
LIMITED WARRANTY
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year from the date of purchase (dated sales receipt is required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product. This warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material and workmanship. The warranty period is three (3) months for daycare or commercial purchasers. U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty expires—contact us for details. Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specific legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
A Few Things Before You Start!
BEFORE you begin assembly, make sure you have all the parts listed below. Some
packages of hardware ! may have extras pieces. ! Questions? We’re here to
help. Little Tikes customer service team at 1-800- 321-0183.
Accessories
Battery installation MUST be completed by an adult:
- Using a Phillips screwdriver (not included) remove the screws and battery compartment cover (1) located on the burner module (O).
- Install three (3) fresh AA alkaline batteries (not included), making sure the (+) and (-) ends face the proper direction as indicated inside the battery compartment.
- Replace the compartment cover and tighten the screws.
Let’s get bzzzzzzzy!
Fit the beehive (part K) – to the beehive – front (part L). Secure using (6)
3/8″ (0.95 cm) screws.
Fit the assembled beehive front to the beehive back (part M). It helps to
align the screw holes. Secure using (6) 3/8″ (0.95 cm) screws – (3) on each
side.
Snap on the beehive countertop (part J).
Let’s get bzzzzzzzy! – cont.
Lay flat the side base – right (part E). Place the assembled beehive, aligning
the “snaps” to the openings in the side. Press down on the “snaps” until you
hear a “CLICK”.
All (4) snaps should be fully installed. Flip the side over and check the
snap-fits. If still not fully seated, use the grill support (part X) to apply
pressure on either side of the snap.
Two parts make one
Insert the dirt (part C) into the BACK of the front base – bottom (part B). It
helps to align the screw holes. Secure using (6) 3/8″ (0.95 cm) screws – (3)
an each side.
Dress it up…
Apply decals to the front base – bottom (part B).
Get in the groove…
Slide the assembled front base bottom into the lip on the front base – top
(part A).
Get snappin’
Snap assembled side base – right (part E) onto the assembled base.
IMPORTANT: Be sure you have already attached the assembled beehive
!
Lay it flat…
Easier if you lay the side base – left (part D) on a flat surface. Then align
the assembled base and press down to snap it into the base.
Snap on the bottom
Flip the base assembly upright and snap it into the base bottom (part F
).
Time for the countertop….but WAIT!
- Press down fully until it clicks into place. Place the countertop (Part G) onto the assembled base. Rest the countertop halfway onto each snap.
- START WITH THE MIDDLE SNAP! Press down fully until it clicks into place.
- Proceed with the other snaps.
Sign me up!
Apply decal to the sign (part I). Then insert the sign (part I) into the top
of the backwall (part H)
A little shade
Slide the canopy fasteners (part P2) into the pockets at each end of the
canopy (part P1). Be sure the open end of the fastener is facing inward
.
A little shade – cont.
Snap assembled canopy fasteners into the top backwall.
Backwall
Snap the backwall (part H) into the assembled base.
Pop it on
Pop in the grill support (part X) into the side base – left (part D).
Add a grill
Pop-in the grill module (part O) into countertop. 
Swing it up!
Swing grill support upward and snap it into the underside of the grill
.
- Look for video of assembly at littletikes.com/videoinstructions
References
- Video Instructions – Official Little Tikes Website
- Official Home of Little Tikes UK
- Official Little Tikes Website | Parent Trusted for Over 50 Years
- Little Tikes | Fun & Learning Toys For All Ages - Australia
- Officiële website van Little Tikes
- Oficjalna strona Little Tikes
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>