CREATE FULLMIX PRO Double Rod Handle Blender User Manual
- June 9, 2024
- CREATE
Table of Contents
CREATE FULLMIX PRO Double Rod Handle Blender
Thank you for choosing our blender. Before using the appliance, and to ensure
the best use, carefully read these instructions.
The safety precautions enclosed herein reduce the risk of death, injury and
electrical shock when correctly adhered to. Keep the manual in a safe place
for future reference, along with the completed warranty card, purchase receipt
and package. If applicable, pass these in-structions on to the next owner of
the appliance. Always follow basic safety precautions and accident-prevention
measures when using an electrical appliance. We assume no liability for
customer failing to comply with these requirements.
SECURITY INSTRUCTIONS
When using any electrical appliance, basic safety precautions should always be observed.
-
Unplug the blender when it is not in use. Make sure the appliance is unplugged before assembling, disassembling, adding additional accessories or cleaning.
-
Children should be supervised to ensure that they do not play with the appliance.
-
This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given su-pervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Incorrectly operating the appliance can cause problems with the appliance and injury to the user.
• Ensure that the voltage indicated on the Technical Specification matches the mains voltage before plugging in the appliance. -
Don’t plug the appliance into the mains until it is fully assembled and always unplug before disassembling the appliance or handling the blade.
-
Do not pick up or operate the appliance if the power supply cord or the plug are dam-aged, or if the blender is malfunctioning or has been dropped or damaged in any way. In case of damage, contact the aftersales service. A damaged cord or plug must be ex-clusively replaced by the manufacturer or a qualified person in order to avoid injuries.
-
Do not let the cord hang over the edge of a table or bench top. Do not let it come in con-tact with hot surfaces, avoid proximity to open fires and all types of heat and sources of ignition.
-
Blades are sharp! Handle with care.
-
Keep your hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used exclusively when the blender is not running.
-
Never immerse the cord, plug or the main body of the blender in water or other liquids. Should the appliance fall into water, immediately unplug the plug from the mains and have the appliance checked by an expert before using it again. It may cause fire, elec-tric shock, injury or death.
-
Do not touch the blender’s moving parts.
-
Do not blend hot liquids.
-
Neither the measuring beaker, nor the chopping bowl is microwave safe.
-
Unplug the blender when it is not in use. Make sure the appliance is unplugged before assembling, disassembling, adding additional accessories or cleaning.
-
Children should be supervised to ensure that they do not play with the appliance.
-
This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given su-pervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Incorrectly operating the appliance can cause problems with the appliance and injury to the user.
-
Ensure that the voltage indicated on the Technical Specification matches the mains voltage before plugging in the appliance.
-
Don’t plug the appliance into the mains until it is fully assembled and always unplug before disassembling the appliance or handling the blade.
-
Do not pick up or operate the appliance if the power supply cord or the plug are dam-aged, or if the blender is malfunctioning or has been dropped or damaged in any way. In case of damage, contact the aftersales service. A damaged cord or plug must be ex-clusively replaced by the manufacturer or a qualified person in order to avoid injuries.
-
Do not let the cord hang over the edge of a table or bench top. Do not let it come in con-tact with hot surfaces, avoid proximity to open fires and all types of heat and sources of ignition.
-
Blades are sharp! Handle with care.
-
Keep your hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used exclusively when the blender is not running.
-
Never immerse the cord, plug or the main body of the blender in water or other liquids. Should the appliance fall into water, immediately unplug the plug from the mains and have the appliance checked by an expert before using it again. It may cause fire, elec-tric shock, injury or death.
-
Do not touch the blender’s moving parts.
-
Do not blend hot liquids.
-
Neither the measuring beaker, nor the chopping bowl is microwave safe.
-
When blending soft foods, operate the blender in one minute intervals. For hard foods, operate in 15 second intervals. After 3 cycles, please allow for the blender to cool down to avoid burning the motor.
-
To reduce the risk of injury, never place the cutting blade on the base without first putting the bowl properly in place.
-
Please, make sure the lid is securely locked into place before operating the appliance.
-
use a damp cloth to clean the motor body.
PARTS LIST
- Speed control dial
- ON/OFF switch
- Turbo
- Release button
- Blending arm
- Beaker
OPERATING INSTRUCTIONS
HOW TO USE THE HAND BLENDER
The hand blender is perfectly suited for preparing dips, sauces, soups,
mayonnaise, and baby food as well as for blending and shakes.
- Fit the blending arm to the motor body until it locks.
- Introduce the hand blender into the beaker. Now press the switch to begin blending.
- Unplug then press the release button to remove the blending arm.
You can use the hand blender in the measuring beaker as well as in any other vessel. Caution! The blades are very sharp.
CLEANING
All parts and accessories, except for the motor body and the chopping bowl lid, are dishwasher safe. However, after processing very salty food, you should rinse the blades right away.
- Do not use a program higher than 60° in the dishwasher, the pieces could deform.
- Do not immerse the motor body in water. Clean the motor body and the chopping bowl lid with a damp cloth.
- Be careful not to use an excessive amount of soap in your dishwasher.
- Foods with colour may stain the plastic parts of the appliance. Wipe these parts with vegetable oil before placing them in the dishwasher.
- Always unplug the appliance before cleaning.
- the blades are very sharp, please, handle with care.
PROCESSING GUIDE (FOR 500ML CHOPPING BOWL)
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible nega-tive effects on the environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>