Scheppach Air-Compressor Accessories User Manual

June 5, 2024
Scheppach

Scheppach Air-Compressor Accessories

Explanation of the symbols on the equipment


| Read the operating instructions!
---|---
| Wear ear-muffs!
****| Wear safety goggles!

Introduction

Dear customer,
We hope your new tool brings you much enjoyment and success.
Note:
According to the applicable product liability laws, the manufacturer of the device does not assume liability for damages to the product or damages caused by the product that occurs due to:

  • Improper handling,
  • Non-compliance of the operating instructions,
  • Repairs by third parties, not by authorized service technicians,
  • Installation and replacement of non-original spare parts,
  • Application other than specified,
We recommend

Read through the complete text in the operating instructions before installing and commissioning the device.
The operating instructions are intended to help the user to become familiar with the machine and take advantage of its application possibilities in accordance with the recommendations. The operating instructions contain important information on how to operate the machine safely, professionally and economically, how to avoid danger, costly repairs, reduce down-times and how to increase reliability and service life of the machine.
In addition to the safety regulations in the operating instructions, you have to meet the applicable regulations that apply for the operation of the machine in your country.
Keep the operating instructions package with the machine at all times and store it in a plastic cover to protect it from dirt and moisture. Read the instruction manual each time before operating the machine and carefully follow its information. The machine can only be operated by persons who were instructed concerning the operation of the machine and who are informed about the associated dangers. The minimum age requirement must be complied with.
In addition to the safety requirements in these operating instructions and your country’s applicable regulations, you should observe the generally recognized technical rules concern-ing the operation of identical constructed machines. We accept no liability for damage or accidents which arise due to non-observance of these instructions and the safety information.

Layout

  • Compressed-air gun
    • 1a Trigger
    • 1b Quick Coupling Connector
    • 1c Nozzle
  • Tire pressure gauge
    • 2a Manometer
    • 2b Deflation Button
    • 2c Quick Coupling Connector
    • 2d Trigger
    • 2e Valve Connection
    • 3 Adapter set for tire pressure gauge

Scope of delivery

  • Open the packaging and remove the device carefully.
  • Remove the packaging material as well as the packaging and transport bracing (if avail-able)
  •  Check that the delivery is complete.
  • Check the device and its spare parts for possible damage caused by transportation. In the event of complaints, you must contact the distributor without delay. Claims at a later stage will not be accepted.
  •  If possible, store the packaging until the warranty period has expired
  • Before handling the device, make yourself familiar with it by reading the operating instructions.
  • For accessories, consumables and spare parts, only use original parts. Spare parts are available from your stockiest.
  • Include our item number, the device model and year of manufacture in your order.

Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, film and small parts!
There is a risk of swallowing and suffocation

Proper use

  • Compressed-air gun
    The blow-out pistol is designed for cleaning and blowing out hollow spaces or hard-to-reach areas, as well as for cleaning soiled equipment. The infinitely variable trigger lever allows an exact dosing of compressed air.

  • Tire pressure gauge
    The tire pressure gauge allows you to inflate tires easily and exactly. Use the pressure gauge to check the tire pressure. If the tire pressure is too high, you can reduce the pres-sure with the integrated relief valve. It may with the device no car tires are filled
    Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
    The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.

Safety instructions

These operating instructions provide places concerning your safety which are marked with this indication: m
Furthermore this manual contains other important sections which are marked with the word „Attention!“.

Attention!
When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well. We cannot accept any liability for damage or accidents which arise due to a failure to follow these instructions and the safety instructions.
DANGER Failure to follow these instructions may cause serious danger to life of danger or fatal injuries.
WARNING Failure to follow these instructions may cause danger to life or danger of serious injuries.
CAUTION Failure to follow these instructions may cause light to medium risk of injury.
NOTE Failure to follow these instructions may cause danger of damage of the engine or other property values.

General safety information

  1. Keep your work area tidy
    • Disorder in the work area can lead to accidents.
  2. Take environmental influences into account
    • Make sure that the work area is well illuminated.
  3. Keep other persons away
    • Do not allow other persons to work with the device especially children and young people.
  4. Securely store unused electric tools
    • Unused tools should be stored in a dry, elevated or closed location out of the reach of children
  5. Avoid abnormal working postures
    •  In use of the device ensure on your secure footing.
  6. Work in full consciousness
    • Do not work with the device when you are under the influence of alcohol, drugs, medication or other substances which might compromise the vision, dexterity and judgment.

This tool is not intended for use by persons (including children) with reduced physical, sen-sory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the tool by a person responsible for their safety (local regulations can restrict the age of the operator) Align the air tools away from yourself or other people or animals.
For your own safety always use the quick coupling adaptor to connect the air tools to the air supply and always regulate the working pressure by using a pressure regulator. Do not exceed the max. permitted working air pressure.
Please refer to the Technical Data.
Do not use oxygen or flammable gases as source of energy.
Check if all connections and hoses are mechanically secured and if they are functioning properly. Loose hoses may cause severe injuries. Only use quick coupling adaptors.
First remove the hose from the compressed air source and disconnect the supply hose from the unit, to avoid uncontrolled spinning or recoil of the supply hose.
Disconnect the air tool from the compressed air source before doing any maintenance work or when not in use.
Please keep in mind that the air pressure gun causes strong vibrations which can lead to repetitive strain injuries in some cases. Keep sufficient rests.
When working with potentially explosive material, keep in mind that static charges may result from circumstances such as cleaning of non-conductive parts with cloth, the flow of liquids or air through hoses, when spray painting, etc.
Do not continue using damaged air tools. Do not open the units and do not try to repair them yourself. Contact a professional or our customer service.
Never exceed the maximum allowable working pressure of 8 bar. To adjust the working pressure use a pressure reducer.
Do not bend the hose of the device. Otherwise it can be damaged.

Safety instructions for working with compressed air and blasting gun s

  • Compressors and lines reach high temperatures during operation. Avoid contact! Risk of burns!
  • Gases or vapours drawn in by the compressor have to be kept free of constituents that may cause fire or explosions inside the compressor.
  • When you disconnect the hose coupling, hold the coupling element in your hand to pre-vent injury from the whiplashing hose.
  • Wear goggles when working with the blow-out gun. Injuries may easily result from foreign bodies and blasted parts.
  • Never point the blow-out gun at other persons and never use it to clean clothes that are still being worn.

Residual risks and accident prevention standards
Neglect of ergonomic principles
Negligent handling of personal protective equipment (PPE)
Negligent handling or commission of the personal protective equipment may cause serious injuries.

  • Wear prescribed personal protection equipment.

Human behavior, misbehavior

  • For any work be fully concentrated.

Residual risks – Cannot be entirely excluded.

Danger from noise
hearing damage
Prelonged unprotected work with the device may cause hearing damage.

  • Always wear ear-muffs.

In case of emergency
In case of a possibly occurring accident take the necessary first aid steps as appropriate and obtain qualified medical aid as quickly as possible.
If you obtain aid please give the following information:

  • Where did it happen
  • What happened
  • How many injured
  • Type of injury
  • Who is reporting!

Technical data

Tire pressure gauge

Operating Pressure bar| 3-6
Max. Operating Pressure bar| 6
Compressed-air gun
Operating Pressure bar| 3-6
Max. Operating Pressure bar| 6

Before first use

Connecting the compressed air source

NOTE Operate the product only with cleaned, condensate- and oil-free compressed air and never exceed the maximum working air pressure at the device of 8 bar.
NOTE The compressed air source must be fitted with a (filter) / pressure reducer so that the air pressure can be regulated.

  • Connect:
    Push the nipple on your compressed air hose into the quick-release coupling, the sleeve will automatically spring forwards.

  • Disconnect:
    Pull back the sleeve and remove the hose.

  • Connecting accessories
    Connect the accessories to a suitable compressed air source by connecting the quick-release coupling of the air supply hose with the plug-in nipple to the accessories. It locks itself in place automatically.

WARNING As you release the hose coupling, hold the hose coupling part in your hand to prevent injuries caused by the hose being thrown backwards.
The compressed air hose is also fitted with a quick lock coupling to which accessories can be connected as described above.
Using of the tire pressure gauge
Note

  • The compressed air, to refill the tire, has to be oil free. Do not connect an oiler ahead of the unit. It is recommended to use a separate compressed air hose only for working with the tire inflator, because there may be oil residues on other compressed air hoses.

Operation

Tire pressure gauge

The tyre pressure gauge features three functions:

  1. Measuring
  2. Filling
  3. Deflation of air.
Measuring
  1. Put the valve connection (2e) on the tire valve. To do this, please press down the lever to unlock the clamping mechanism. As soon as you release the lever, the plug clamps at the valve.
  2. Read the existing pressure from the manometer.
    On the outer rim of the scale, you can read the value in the unit bar. (1 bar=100 kPa). On the inner rim of the scale, you can read the value in the unit psi.
Filling
  1. Connect the quick coupling connector (2c) of the tire inflator with a compressed air supply.
  2. Put the valve connection (2e) on the tyres valve.
  3. Press the trigger (2d), compressed air flows into the tire. The moment you are filling in the air, the manometer shows a pressure that is a little bit higher than the actual tyre pressure. When you release the trigger, you can read the actual tire pressure on the manometer.
Deflation of Air

If the tyre pressure is too high, use the deflation button (2b) and slowly reduce the air pres-sure to the desired value.

Compressed-air gun
  • The blow-out gun is equipped with a quick coupling connector (1b). Use the quick coupling connector to connect the blow-out gun with the compressed air supply.
  • Activate the compressed air generator.
  • Press the trigger (1a) to start the delivery of the air. The farther the trigger is pressed, the stronger the air jet will be.
  • Release the trigger to stop the delivery of air.
  • After work disconnect the tool from the compressed air generator.

Maintenance and cleaning

CAUTION Disconnect the device from the compressed air supply before cleaning it.

  • To ensure proper functionality and a long lifetime, diligent lubrication and maintenance is essential.
  • For operating pneumatic tools clean air is required. Corrosion residues, dust and dirt from the pneumatic pipes reduce the efficiency of the tool and will cause technical problems.
  • If necessary clean the units and the accessory with a moist cloth.
  • Do not use abrasive or aggressive chemicals as benzene or thinner, which may dissolve plastic parts.
  •  Do not allow liquids to enter the tools and never immerse them into liquids. Water in the compressed air inlet can damage the machine. Therefore it is recommended to drain the air lines and the compressor in regular intervals! Also clean the air filters in regular intervals.
Cleaning of the Tire pressure gauge
  • Do not allow foreign substances and dirt to enter the compressed air nozzle.
  • Do not expose the manometer to vibrations or mechanical stress.
  • Add a few drops of oil to the sealing of the trigger pin in regular intervals. Apart from that the tyre inflator is maintenance free.
Cleaning and maintenance of the compressed-air gun
  • Before cleaning or maintaining, first disconnect the compressed-air gun from the air sup-ply.
  • Add a few drops of oil to the sealing of the trigger pin in regular intervals. Apart from that the compressed-air gun is maintenance free.
Air Pressure and Air Volume
  • Operate the air tools with the pressure stated in the technical data using a compressor with an air suction capacity of at least 200 l/min. When using higher pressure than the max. permitted pressure for operating the air tool, its self life will be reduced drastically. The ideal capacity is provided by compressors with a suction capacity of 300–400 l/min.
  •  Only use air hoses with an inner diameter of at least 9 mm. When setting up the air pres-sure, always keep in mind that the pressure will decrease approx. 0.6 bar when using a 10 m long hose with an inner diameter of 9 mm.

Storage

  1. Perform all general maintenance, which are in the User’s Guide in the Maintenance section.
  2. Store all parts of the set in a dust and dirt-free location.

Disposal and recycling

The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Ask your dealer or your local council.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals