INTELLINET 560269 Cat6 Wall Mount Patch Panel Instructions

**INTELLINET 560269 Cat6 Wall Mount Patch Panel Instructions

**

Note: These instructions can be used for any Patch Panel in the Intellinet line. Your model may differ from the one shown.

Instructions

Strip away 25-30 mm of the cable jacket and separate the wires into 4 pairs. Cut the wire holder flush with the cable jacket.

Refer to the IDC color codes on the back page to position each wire, and connect it to the patch panel using a Krone or 110D punch-down tool.

Attach the cables to a cable manager using cable ties, then position the patch panel as desired

IDC COLOR CODES

REGISTRATION

Scan the QR code on the other side or visit

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT 

This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on

Waste Electrical and Electronic Equipment (WEEE), this
electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste.

Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.

REGULATORY STATEMENTS

The Declaration of Conformity for is available at:

North & South America
IC Intracom Americas
550 Commerce Blvd.
Oldsmar, FL 34677, USA

Asia & Africa
IC Intracom Asia 4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan

All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Intellinet Printed on recycled paper. Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.

References

• DropCatch.com
• Intellinet Network Solutions Account and Product Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>