SMAWAVE SPH320-aq Rugged Mobile User Guide

SMAWAVE SPH320-aq Rugged Mobile

Part Name

1. lD/2 D scanner
2. CV Power on/off button
3. Volume+
4. Volume-
5. Customizable button
6. Front camera
7. Brand logo
8. Distance Light sensor
9. Front speaker
10. Menu return button
11. Front fingerprint recognition
12. Return button
13. Head phone jack
14. Type-C
15. Peripheral interface
16. POC dedicated intercom button
17. sos
18. Rear camera
19. Peripheral interface
20. SIM/TF card slot
21. Brand logo
22. era die charging port
23. Flash LED

Safety Warning

To avoid unnecessary damage or conflict, read below information before using

1. Do not use the device while you are drawing.
2. During a call, please keep the phone at least 15mm away from your ear or body.
3. Please turn off the device if it is forbidden for using near some medical instrument.
4. Please turn off the device when you are on a plane, because wireless device may interfere with the radio communication system
5. Do not use the device near gas station or in the hazardous environment.
6. Avoid using in extremely high or extremely low temperature environments.

Precautions

1. The USB port/antenna port needs to be plugged tightly before the waterproof test.
2. The phone may affect the waterproof effect after a destructive drop
3. 3. Obvious changes in atmospheric pressure will cause the handset, speaker, and microphone to be silent or noisy. After soaking in water, the speaker, sending voice, and answering sound will be affected. You need to drain off the water. !liter a period of time, it will return to normal.
4. After soaking in sea water, please use clean water to desalt
5. When using the PLTE network, the USB interface cannot use the file transfer function. \A/hen using the USB file transfer function, the PLTE switch must be turned off.

Basic Operations

1. Power on/off
   Press and hold the Power key button for 3 seconds to turn on the device. To turn off your device, press and hold the Power key for 3 seconds, and then select Power off.

2. Adjust the volume
   Use the volume up and down buttons on the left side of the phone to adjust the volume.

3. Preventing water from ingress
   Cover the SIM card, USB interface and other covers properly to achieve IP68 waterproof.

4. Airplane mode
   Setting->Network & lnternet->Airplane mode

5. Restore factory settings
   Setting->Reset->Restore factory settings

6. Install Micro-SIM/T card
   Open the SIM cover, you will see the TFF SIM card &Micro SD card slot. Please be aware of the right slot & direction as illustration.

7. 1D/2D scanner operating instructions
   Install the appropriate scanning tool APK in the hand held, open the APK, click to open the corresponding scanning function item, the 10/20 scanner will emit a red scanning light, aim at the QR code or barcode, and the scanning tool APK will display the corresponding information.

How to Set Up/Use Radio Properly

• Function use
  Click the Settings app in the application interface to enter the settings.

• Sound
  From the Settings menu, select sound to change the sound settings for the device: sound, phone ring tone, and system sound.

• Display
  From the Settings menu, select Display to change the display of the device, such as brightness, wallpaper, sleep time, and font size

• Storage
  In the Settings menu, select Storage to view the storage status and available space of the system

• Battery
  In the Settings menu, select Battery to view battery information.

• Security &   location
  In the Settings menu, select Security &location to change how screen is locked.

• Language
  In the Settings menu, select System- >Languages to change the system language .

• Backup   & reset
  In the Settings menu., select System->Backup and reset options to back up the data in the device or restore the factory settings.

• Date and time
  From the Settings menu, select System->Date &Time to change the time and date of system

• Developer  options
  In the Settings menu, open the developer options to connect the device to the computer and transfer data

• About equipment
  In the Settings menu, select System->About Phone to view various information: Android version, kernel version, etc

PL TE Settings & status

Enter the PLTEAPK, set PLTE module configurations in 4G interface:

Scan Mode Settings

Set scan mode:

PLTE Status

Check PLTE module status in Pl TE Status interface:

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different  from that to which the recew er is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 15rnm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authorrry to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>