DOMO DO7099S Iron with Steam Generator Instruction Manual

: June 5, 2024
: DOMO

Table of Contents

INSTRUCTION BOOKLET
DO7099S
WEBSHOP
SAFETY INSTRUCTIONS
PARTS
TEMPERATURE DIAL
BEFORE THE FIRST USE
USING THE STEAM GENERATOR
CLEANING AND MAINTENANCE
DESCALING SYSTEM
IRONING TABLE
References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

INSTRUCTION BOOKLET

IRON WITH STEAM GENERATOR

DO7099S

WARRANTY
This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty.
If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it.

Domo-elektro s.r.o. Hluboká 147, 34506 Kdyně vizwww.domo- elektro.cz
tel. 379 789 684nebo na servis@domo-elektro.cz , tel. 379 422 550

Model DO7099S

Name …………………………………………………..
Address …………………………………………………..
Date of purchase …………………………………………………..
Tel.: …………………………………………………..

RECYCLING INFORMATION
****This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
The packaging is recyclable. Please treat package ecologically.

WEBSHOP

From now on, accessories and parts of Domo appliances can also be ordered online from the Domo webshop*:

http://webshop.domo-elektro.be

You can reach the webshop through the Domo website as well: www.domo- elektro.be. The accessories and parts can also still be obtained at the store where you bought the appliance.

Only in Belgium, the Netherlands, Luxemburg, France and Germany.

If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazarduous situation.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken, including the following:

Read all instructions carefully. Keep this manual for future reference.
Make sure all packaging materials and promotional stickers have been removed before using the appliance for the first time. Make sure children cannot play with the packaging materials.
This appliance is intended to be used in household and similar applications such as:
• staff kitchen areas in shops, offices and other working environments;
• farm houses;
• by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged from 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
Keep the appliance and its cord out of reach of children younger than 16 years.
The appliance must be disconnected from its power source when not in use, during service and when replacing parts. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
CAUTION: In order to avoid a hazard this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
The iron must not be left unattended while it is connected to the supply mains.
The filling aperture must not be opened during use. Follow the instructions of this booklet for safe refilling.
The iron must be used and rested on a flat, stable surface and resistant to heat and hot steam.
The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. Do not operate this appliance with a damaged cord or plug or in the event the appliance malfunctions or has been damaged in any manner. Return the appliance to the DOMO Service Department or its service agent for examination, repair, or electrical or mechanical adjustment. Do not try to repair the appliance yourself.
Keep the iron and its cord out of reach of children less than 16 years of age when it is energized or cooling down.

The surface(s) marked with this symbol are liable to get hot during use. It is advised not to touch the surfaces of the appliance other than the handles to avoid burns.

Do not use or store this appliance outdoors.
Do not move the iron while in use or when still hot. Allow to cool before moving the iron or before maintenance.
Do not use this appliance for other than intended use.
Do not fill the water reservoir with any other liquid than water.
Do not use the steam function of the iron without water in the reservoir. This might cause damage to the iron.
Check carefully that the voltage and frequency of the power net match the indications on the rating label of the appliance.
The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local standards and requirements.
Only use the utensils delivered with the appliance.
To protect against electrical shock or burns, do not immerse unit, cord, or plug in water or other liquid.
Do not operate the appliance with wet hands.
Unwrap the cord completely to prevent overheating of the cord.
Do not let the power supply cord touch hot surfaces.
Only fill the water reservoir with no other liquid than water.
Make sure the appliance is correctly assembled, then plug the cord in the wall outlet. To disconnect, turn controls to “OFF” or “0” position, then remove the plug from the wall. Never pull the cord or appliance to remove the plug from the socket.
Make sure the appliance has cooled down before opening the boiler for cleaning. Make sure the bolt of the boiler is correctly and well fixed onto the appliance after maintenance.
Failure to maintain this appliance in a clean condition could adversely affect the life of the appliance and possibly result in a hazardous situation.
Any injury or damage caused by failure to comply with these rules are at your own risk. Neither the manufacturer, importer, or the supplier may be held liable.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

PARTS

DOMO DO7099S Iron with Steam Generator parts

Filling cap
Trigger for removing the water tank
Handle
Water tank
Steam release button
Soleplate
Temperature dial
Temperature indicator
Iron
Thermal insulation pads
Steam generator
Control panel
Cord clamp
Descaling cartridge

Trigger
Grab the water tank by the handle and pull the trigger. You can now remove the water tank from the generator.

Filling cap
Open the filling cap and use the opening to fill the water tank.

On/off button (A)
Plug in the appliance and press the on/off button. The on/off indicator (B) will light up. The appliance is now switched on. To turn the appliance off again, press the on/off button and hold. The indicators will go out and the appliance is now switched off.

Temperature indicator
When the iron is heating up, the temperature indicator will be lit up. When the set temperature has been reached, the light indicator will go out again. During ironing the indicator will alternately light up and go out again, as the iron is being kept at the right temperature.

Steam light (C)
When you turn on the device, the steam light will remain unlit. As soon as the device has preheated, the steam light will light up blue, indicating you may start ironing.

Steam release button
When the light indicator lights up blue, you can start using steam. Press the steam release button on the inside of the handle of the iron to spray a continuous steam out of the soleplate. When you let go of the button, you will iron dry again, without steam.

Descaling cartridges
We advise you in changing the descaling cartridges each time you’ve spent 9 hours using the device. In order to replace the descaling cartridge, you need to remove the water tank and remove the old cartridge and insert a new one in the same place.
Attention: A new descaling cartridge is best left soaking in a small container of water for an entire night. This ensures it’s wet enough to allow you to iron immediately after changing the cartridges out.

Cord clamp
After use you can easily store the cord and steam hose by using the cord clamp. Pull out the clamp, lead the steam hose and the cord around the steam generator and push in the clamp to lock the cord and steam hose.

TEMPERATURE DIAL

Set the right temperature for the right fabric with the temperature dial.

For synthetic fabrics/silk: 70<T<120°
For wool: 100<T<160°
For cotton: 140<T<210°
For linnen: 170<T<225° MAX

BEFORE THE FIRST USE

Remove any stickers or protective foil from the ceramic soleplate.
Heat up the iron until the maximum temperature and iron on a damp cloth during a couple of minutes to remove any possible residues from the soleplate. Iron according to the instructions in the section «Steam ironing».

Caution:

During the first use it is normal that a specific odeur escapes from the appliance. This odeur will disappear after a while.
Some particles may come out of the soleplate during the first use. This is normal. The particles are harmless and will disappear after a while.
When turning on the appliance, the steam generator may produce a pumping sound. This is normal. This sound indicates that water is pumped into the steam generator.
While the soleplate is heating up, some steam will be released automatically. This is also normal and will last for about 3 seconds.

USING THE STEAM GENERATOR

This steam generator offers 2 options: dry ironing or steam ironing. Follow the instructions below. Also carefully read the ironing tips at the end of this section before using the appliance.

Dry ironing

Place the iron on the thermal insulation pads of the steam generator.
Plug in the appliance and press the on/off button.
Select the desired temperature with the temperature dial, according to the kind of fabric that needs to be ironed. The temperature indicator will light up and the iron will start heating up.
When the temperature indicator goes out, the selected temperature has been reached. You can now start ironing.

Caution: Never touch the hot soleplate!

Steam ironing
Caution: do not plug in the appliance yet at this point.

Grab the water tank of the steam generator by the handle and pull the trigger on the inside of the handle to pull the water tank out of the generator. Open the filling cap and fill the water tank with water. It is best to use demineralized water. Make sure that you do not exceed the maximum level (1.2 L). Close the filling cap after filling the water tank.
Place the water tank back into the steam generator.
Place the iron on the thermal insulation pads of the steam generator.
Plug in the generator, press the on/off button. Set the temperature dial to the desired temperature, according to the kind of fabric, and the temperature indicator will light up.
The water in the water tank will start heating up and after a couple of minutes the temperature indicator will go out. This indicates that the soleplate has reached the set temperature. When the steam indication light colours blue, you may start ironing.
Attention: make sure that the temperature dial is positioned into the steam area (indicated by ).
Caution:
• Never touch the hot soleplate!
• Never aim the steam at people!
After ironing, press and hold the on/off button. The appliance will shut off and all the light indicators will go out. Unplug the appliance. Place the iron on the thermal insulation pads of the generator and let the appliance cool down completely.

Ironing tips

Always check first if there is a label on the garment with instructions for ironing. If this is the case, then always follow these instructions.
The iron heats up faster than it cools down. Therefore, always iron the garments that require the lowest temperature first, like synthetic fabrics.
If a fabric contains several types of fibres, always choose the lowest temperature to iron the combination of these fibres.
Silk and other shiny fabrics should be ironed inside-out.
Velvet and other fabrics that easily become shiny should be ironing with slight pressure, in one direction. Always keep the iron moving.
Fabrics that are a 100% wool can be ironed with steam. Set the temperature to the maximum and use a dry cloth to place on the fabric.
Never iron over zippers or other metal objects in a garment. This can damage the soleplate. Always iron around such objects.

Caution: if you iron woollen fabrics, the fabric may become shiny. That is why you should turn the garment inside-out for ironing.

CLEANING AND MAINTENANCE

Unplug the appliance and let it cool down before cleaning it.
Wipe residues from the soleplate with a damp cloth or with a non-abrasive (liquid) cleaner.
Caution: Do not use any chemical, steel, wooden or abrasive cleaners to scrape the soleplate.
Clean the upper part of the iron with a soft, damp cloth.
Wipe the water drops on the steam generator and the thermal insulation pads with a dry cloth.
When not using the steam generator for a long time, pour out the water from the water tank and place the iron on the thermal insulation pads to store the appliance.
Wind the steam hose and cord around the appliance and lock them into place with the cord clamp.

DESCALING SYSTEM

This device has an electronic system that checks the water hardness.
The descaling cartridge will remove the hard water. Depending on how hard the water is and how the device is used, the descaling cartridge will need to be replaced after 9 hours of usage.
Take the water reservoir out of the steam generator.
Place a new descaling cartridge.
Should you have no descaling cartridges handy, you may temporarily use a combination of 50% tap water and 50% distilled or purified water to fill the device. Afterwards you can continue ironing for a little while until your descaling cartridge arrives.

After you have replaced your descaling cartridge, it will take a little while before you get steam out of your iron. This is normal and happens because your cartridge is still completely dry and it takes a bit for all the water in the generator to pass through entirely. We advise you to replace the descaling cartridge the night before you plan on ironing, making sure it’s drenched.