Ausounds AU Bio-PEEK+PU True Wireless Earbuds User Manual
- June 8, 2024
- AUSOUNDS
Table of Contents
Ausounds AU Bio-PEEK+PU True Wireless Earbuds
Ausounds Intelligence, LLC.
15300 Ventura Blvd., Suite 214
Sherman Oaks, California 91403, USA
www.ausounds.com
Thank you for purchasing the AU-Frequency BT True Wireless Earbuds. Please
read this user manual carefully before using this product, and keep it for
future reference.
These true wireless earbuds come with Bluetooth® 5.2 technology, for easy
seamless connection. We took our time to create a wireless earbud with the
audio that would be respected by the music creator community, but would also
serve the purpose of music lovers everyday use.
CONTENTS
Please check if the following parts in the package are complete
PRODUCT DETAILS
Please charge for 1 hour prior to the first use.
LISTENING COMFORT
Select the right size ear tip
Select the ear tip that provides the most comfortable fit and audio seal. Lightly pull the ear tip to remove it from the earbuds, and install a new suitable ear tip.
Wearing earbuds
Lightly insert the earbuds into the ear and rotate it for a comfortable fit. There is a left side and a right side earbud as indicated by the L and R markers on them.
BLUETOOTH FEATURES
Automatic connection
The AU-Frequency BT will automatically turn off when it is placed in the
charging case. If there is no connection for 5 minutes your earbuds will
automatically turn off. The left and right earbuds can be connected to the
device and used independently.
Add a new device
Tap either touch panel 5 times. The indicator light will alternately flash red
and green and the earbuds will enter the pairing state.
Reset
To reset the pairing, tap 7 times on each side of the earbud. The red LED will
flash 3 times; then the pairing record is cleared and the earbuds will re-
enter pairing mode. (Android devices vary by system)
CHARGING
Battery life
Please charge for 1 hour prior to first use. Allow an additional 15 minutes
once initial charge has been completed. A single play can last up to 5 hours,
and the total battery life can reach 30 hours with the charging case.
Earbuds
Put the earbuds in the charging case and they will automatically shut down and
enter the charging state.
Charging case
PLAYBACK CONTROLS
Touch Control| Left Ear
| Right Ear
---|---|---
Volume control| Long press volume –| Long press volume +
Previous/Next track| Double tap| Double tap
Answer| Tap| Tap
End Call/Decline call| Long press 2 sec| Long press 2 sec
Play/Pause| Tap| Tap
Activate voice assistant| Tap 3 times| Tap 3 times
SPECIFICATIONS
- Bluetooth Version BT 5.2
- Bluetooth Protocol SBC, MSBC, AAC
- Bluetooth Range 10m | 32ft
- Driver Type Dynamic driver
- Driver Size 10mm
- Impedance 32 ohms
- Frequency Range 20Hz-20kHz
- SPL 102 db
- Battery Life (total) 30 Hours
- Battery Capacity (earbud) 60mAh
- Charging Time 1.5 Hours
- Weight (earbud) 5g
- Waterproof level IPX4
SAFETY INSTRUCTIONS
- Do not attempt to make any modifications to the product, including removing or modifying the product, as the damage is not covered by the warranty.
- Do not place the product in extremely high or low ambient temperatures for extended periods of time. Extreme temperatures can cause equipment to deform, and reduce the charging capacity of the device.
- Thunderstorm weather may affect the normal use of the product and there is a risk of electric shock, so please do not use the earphones outside during thunderstorms.
- This product contains small parts. Do not swallow it to avoid danger. Keep the product out of the reach of children.
- Using the product for a long time at high volume may affect your hearing, please control the volume.
- If this product supports active noise cancellation. Please do not turn this function on when walking, driving, or cycling to avoid accidents.
BATTERY WARNING
This product contains lithium battery, please do not disassemble, impact,
squeeze or put into fire. Please do not place the product under high
temperature or hot sun, beware of explosion. If there is swelling, leakage,
odor or any other abnormality in the battery compartment of the product, do
not continue to use it. Please dispose of used batteries properly in
accordance with local regulations.
WARNING
Do not subject the product to excessive shock. If your product has touch
sensor, do not apply stickers or other adhesive items to the touch sensor
control panel. Be careful not to catch your finger in the unit when folding.
The Bluetooth function may not work with a mobile phone, depending on the
signal conditions and the surrounding environment. Do not apply weight or
pressure to the product for long periods, including when it is stored, as it
may cause deformation. If you experience discomfort while using the product,
stop using it immediately. If this product has earpads/ ear tips they may be
damaged or deteriorate with long-term use and storage.
CLEANING THE UNIT
When the outside of the product is dirty, clean it by wiping with a soft dry
cloth. If the product is particularly dirty, soak a cloth in a dilute solution
of neutral detergent, and wring it well before wiping. Do not use solvents
such as thinner, benzene, or alcohol, as they may damage the surface.
DO NOT USE THE HEADSET NEAR MEDICAL DEVICES
This product has magnets which may interfere with pacemakers, defibrillators
and programmable shunt valves or other medical devices. Do not put this
product close to these medical devices and the person who use any of these
medical devices. Consult your doctor before using this product, if you have
any concerns.
DO NOT PLACE CARDS WITH MAGNETS IN THE VICINITY OF THE HEADSET
This product has magnets. Placing cards with magnets in the vicinity of the
product may affect the magnetism of the card and render it unusable.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF EXPOSURE STATEMENT:
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
CAUTION!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ISEDC STATEMENT
This device complies with Innovation, Science, and Economic Development Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
ISEDC RF EXPOSURE STATEMENT
The device is compliance with RF exposure guidelines, users can obtain
Canadian information on RF exposure and compliance.
PRODUCT WARRANTY
Ausounds Intelligence warrants this product to the original purchaser to be free from defects in material and workmanship, under normal conditions for a period of 1-year for parts and labor only from the date of original purchase. Ausounds agrees at our option during the warranty period, to repair any defect in material or workmanship or to furnish an equal product in exchange without repair charges, during the first 365 days. After 365 days, a flat labor rate may be required and payment sent along with the product. Except where prohibited by applicable law, this warranty is nontransferable and is limited to the original purchaser and the country in which the product was purchased. This warranty gives you specific legal rights, and you may also have other rights, including a longer warranty duration that may vary under local laws. If you do not find a solution on our website, please contact the retailer from whom you made your purchase. Valid warranty claims are generally processed through the point-of-purchase retailer during the first thirty (30) days after purchase. This period of time may vary depending on the retailer. If your warranty claim cannot be processed through the point-of-purchase retailer, please contact our support department at [email protected] or call direct at 1-818-873-0113.
Please follow these directions to return your product:
- Contact Ausounds support at [email protected] or 818-873-0113 to receive a return authorization
- Pack the unit in a well-padded sturdy carton if you do not have the original packaging
- Enclose a copy of your sales receipt to validate the date of purchase
- Ausounds will elect to repair or replace the product free of repair charges during the first 365 days. After 365 days, payment for labor may need to be sent with the product. Call customer support at 818-873-0113 or email [email protected]
Ausounds Intelligence
Attention: Warranty Services
3190 Chicago Ave Riverside, CA 92507-3448 US
NOTE: This warranty does not cover any product which has been subject to damage due to misuse, neglect, accidental damage, abuse, commercial use, or any product modifications. This warranty does not cover damage due to improper operation or maintenance, connection to an improper voltage supply, or attempted repair by anyone other than Ausounds. This warranty does not cover products sold AS IS or refurbished units. For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by Ausounds’ Limited Warranty are in addition to all rights and remedies driven by such consumer protection laws and regulations , including but not limited to these additional rights.
National Statutory Rights
Consumers have legal rights under applicable national legislation governing
the sale of consumer goods. Such rights are not affected by the warranties in
this Limited Warranty. In Brazil, remedies include the consumer’s option to
keep the defective product and receive a proportional price reduction.
European Union notice:
Please note that, in the European Union, any warranty period less than two
years shall be increased to two years.
For Australia/New Zealand Consumers Only:
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
This warranty is provided by Ausounds Intelligence, LLC 15300 Ventura Blvd
Suite 214 Sherman Oaks, CA 91403. Contact information for Australia/New
Zealand Consumers Only: Telephone: 1
818-873-0113. For any product/warranty
-related questions, please contact customer support at
[email protected]
For Japan Consumers Only:
The Federal Arbitration Act (the “FAA”) applies to the agreement to arbitrate
to the maximum extent allowable. Except as preempted by FAA, the laws of the
State of California, without reference to its choice of laws principles, will
govern this Limited Warranty. With the exception of disputes in small claims
court or in arbitration, You and Ausounds consent to jurisdiction and venue in
the state or federal courts located in Los Angeles County, California, for any
claims arising out of a dispute relating to this Limited Warranty.
Notwithstanding the Section titled “Binding Arbitration and Class Action
Waiver”, if You are a consumer in Japan, You have the right to resolve
disputes before the Tokyo District Court in Japan. Nothing in this Limited
Warranty affects Your rights as a consumer in Japan to rely on mandatory
provisions of Japanese law. Contact information for Japanese Consumers Only:
Telephone: 03-3477-0122. For any product/warranty -related questions, please
contact customer support at
[email protected]