CONRAD 2377700 Toolkit RC Servo Tester Instructions
- June 8, 2024
- CONRAD
Table of Contents
CONRAD 2377700 Toolkit RC Servo Tester
Safety Instructions
ST8 Servo Tester
Item no: 2377700
Intended use
- Use the product to test servos.
- If you use the product for purposes other than those described, the product may be dam-aged.
- Improper use can result in short circuits, fires, or other hazards.
- The product complies with the statutory national and European requirements.
- For safety and approval purposes, you must not rebuild and/or modify the product.
- Read the safety instructions and any accompanying instructions carefully and store them in a safe place.
- Make this product available to third parties only together with the safety instructions and any accompanying instructions.
- All company names and product names are trademarks of their respective owners. All rights reserved.
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown.
Follow
the instructions on the website.
Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate
important information in this document.
Always read this information carefully.
Safety instructions
Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorized repair center.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not switch the product on after it has been taken from a cold to a warm environment. The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.
- Never operate the product in direct proximity of strong magnetic or electromagnetic fields or transmitter aerials or HF generators. Doing so can prevent the product from functioning properly.
Operation
- Consult an expert when in doubt about the operation, safety or connection of the appliance.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
Technical data
- Input voltage …………………………… 7 – 28 V/DC
- Input current …………………………… max. 10 A
- Operating temperature …………….. +10 to +40 °C
- Operating humidity ………………….. 10 – 90 % RH (non-condensing)
- Storage temperature ………………… -20 to +70 °C
- Storage humidity ……………………… 10 – 90 % RH (non-condensing)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved.
Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the
editor.
Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2377700_V1_0921_jh_ss_en I3/O1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>