EMOS ZR9034 LED Panel Accessory Instruction Manual
- June 8, 2024
- EMOS
Table of Contents
EMOS ZR9034 LED Panel Accessory
Contents
- A – Profile A
- B – Profile B
- C – Ceiling fitting
- D – Wall plug A
- E – Wall plug B
- F – Hex socket screw
- G – M4×5 self-tapping screw H – M4×25 self-tapping screw I – Wall plug
Instructions for assembly
- Assemble the individual parts of the frame according to the drawing.
- Maintain the order of profiles A and B in accordance with figure 2.
- Mark positions for drilling holes and drill holes with diameter of 5 mm at these spots.
- Insert wall plugs into the holes.
- Fasten the frame to the ceiling using the supplied screws.
- Dismount profile B on one side, insert the panel into the frame, then replace the profile.
- Assembly is complete.
Declaration of Conformity
EMOS spol. s r.o. declares that the LED Panel Accessory is in compliance with
the essential requirements and other relevant provisions of Directive. The
device can be freely operated in the EU. The Declaration of Conformity can be
found at http://www.emos.eu/download.
Do not throw electric appliances into unsorted municipal waste, use collection
points of sorted waste! Dangerous sub-stances from electric appliances
deposited in landfills can leak into underground waters, reach the food chain
and damage your health and well-being. For actual information about collection
points, contact the local authorities.
References
- Ke stažení - EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod
- EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>